Well I bascially got my pad build for my building - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rambler · 03-06-2013, 12:34 AM

looks like good progress so far,, amazing how that pole replacement went from 6 weeks to 2 days !

teeitup · 03-06-2013, 06:13 PM

Troy, single axle ford dump truck and yes it was alot of clay and I need a few more on the north slope

Shawn, Thanks

Joe, Thanks, it actually took weeks to get the pole set, but its all OK now

More pics as of today. Also I went and bought 24 eight foot 2 bulb florescent light fixtures and bulbs today and also a Raznor 160,000 BTU overhead natural gas heater from a guy who was tearing down a big business in north Topeka, All are working order. Lights were $300 for all and heater was $250, and its 1 year old.

pritch · 03-07-2013, 12:12 AM

I used a duct jack to set my trusses on my shop. That may be an option for that gable end. They are usually rated for at least 500 pounds, and should be available at most rental yards.

http://www.bing.com/images/search?q=...acks&FORM=IGRE

teeitup · 03-07-2013, 07:13 PM

Thanks Pritch, called today, $40 a day can't beat that. Wow my back feels better already

DesertCat · 03-07-2013, 07:37 PM

Looking good! Cool that you are doing so much of the work yourself and knowing that some things you don't want to

I look forward to the day I will hopefully get to do the same. Congrats! Happy for you.

pritch · 03-07-2013, 11:51 PM

Glad to help out. That's going to be a nice shop.

_Ogre · 03-08-2013, 03:24 PM

well done, you got a smoking deal on the lights and heater.
used building stuff is hard to sell, being in the right place at the right time is everything

**29od1** · 03-08-2013, 05:30 PM

Looks like you're coming along Randy! I have a 150kBtu Reznor in my 40 x 60 and it heats it up fast. But I paid about 4 times what you did for it

Everybody starts jonesing for parts when you take on these projects. Can't you fit a truck or two inbetween for everyone?

teeitup · 03-08-2013, 08:27 PM

DesertCat, Thanks, this is my third time building a shop, I always wish they were done after awhile

Pritch, your info was great!! Thanks

_Ogre, your right I was lucky, Thanks

David, this has me wore down, truck stuff is on back burner and actually may end up being on back burner for good in the future. The golf course deal may go through quicker than I thought it would. Be sure to stop by next time you come up, Thanks

Here are some more pics, got the concrete done today, sitting trusses Tues.

Thanks Randy

teeitup · 03-08-2013, 08:28 PM

I am really happy with what has got done in 6 days, Thanks Randy

**lolife99** · 03-08-2013, 08:50 PM

Looks good!
Keep at it.

**zicc1835** · 03-08-2013, 08:57 PM

WOW thats really coming along and looks great

shortbed70 · 03-09-2013, 08:52 AM

Looking good!! You'll be tearing apart trucks and have stuff stashed everywhere in no time... Lol
Posted via Mobile Device

rmvlt1100 · 03-09-2013, 01:17 PM

Quote:

Originally Posted by teeitup

I am really happy with what has got done in 6 days, Thanks Randy

Very nice. That is going to be the perfect size where a guy could go and not be seen for weeks. And that a lot of concrete you got there.
Posted via Mobile Device
Posted via Mobile Device

teeitup · 03-10-2013, 08:10 PM

Thanks guys. We didn't get anything done this weekend, I had a pool tourney Sat and it also rained all day and today it was cold and windy. Still planning in setting trusses Tues. Thanks again, Randy

468BIGBLOCK · 03-11-2013, 09:17 AM

lookin fine!!!

teeitup · 03-14-2013, 08:23 AM

Thanks, its getting there

got the trusses sat yesterday, duct lift and 4 guys in 3 1/2 hours. Pritch your idea was awesome!!!!!
Got some cabinets bought now I just have to figure out whats the best way to paint them.

**truckdude239** · 03-14-2013, 10:13 AM

Quote:

Originally Posted by teeitup

Got some cabinets bought now I just have to figure out whats the best way to paint them.

Paint normally works bestJust an fyi.

sorry i couldn't resist

pritch · 03-15-2013, 09:51 PM

I'm glad that worked out for you! I'm happy to help, even if it is just an idea instead of actual labor.

That's sure going to be a nice shop

teeitup · 03-21-2013, 12:56 PM

Well we are gaining slowly, snow storm Tues, cold Wed, now snow again today, tomorrow and Sat, wow its setting us back but oh well it will get done sometime. Rod, my buddy is doing most of it, I try to help when I get off work, but he is gone by then most of the time. I decided to go with tin on inner walls and ceiling now and ended up putting 2 windows in.

**29od1** · 03-21-2013, 01:06 PM

Looking good Randy!

Are you going to put a storage area above the ceiling?

teeitup · 03-24-2013, 09:22 AM

Thanks David, just insulation no storage up there. We got all 4 sides done, got a bunch of snow yesterday and last night so the roof will have to wait for awhile

chipflyer · 03-24-2013, 06:10 PM

Looking good Randy!

72BlckButy · 03-24-2013, 06:59 PM

Looking good Randy.

What was your final accumulation amount?

We had about 7-9".
Posted via Mobile Device

msgross · 03-24-2013, 07:39 PM

Quote:

Originally Posted by shortbed70

Looking good!! You'll be tearing apart trucks and have stuff stashed everywhere in no time... Lol
Posted via Mobile Device

my thoughts exactly!

my buddy did the same technique with the treated wood below grade mixed with non treated above, way cheaper than 6x6's... how deep did you go?

03-06-2013, 12:34 AM	#26
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	Re: Well I bascially got my pad build for my building looks like good progress so far,, amazing how that pole replacement went from 6 weeks to 2 days ! __________________ No matter where you are..... There you are... Buckaroo Banzi

03-06-2013, 06:13 PM	#27
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Troy, single axle ford dump truck and yes it was alot of clay and I need a few more on the north slope Shawn, Thanks Joe, Thanks, it actually took weeks to get the pole set, but its all OK now More pics as of today. Also I went and bought 24 eight foot 2 bulb florescent light fixtures and bulbs today and also a Raznor 160,000 BTU overhead natural gas heater from a guy who was tearing down a big business in north Topeka, All are working order. Lights were $300 for all and heater was $250, and its 1 year old. Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-07-2013, 12:12 AM	#28
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	Re: Well I bascially got my pad build for my building I used a duct jack to set my trusses on my shop. That may be an option for that gable end. They are usually rated for at least 500 pounds, and should be available at most rental yards. http://www.bing.com/images/search?q=...acks&FORM=IGRE __________________ '68 Panel Project Boogie Chillin' '68 C-10 Ol' Green

03-07-2013, 07:13 PM	#29
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Thanks Pritch, called today, $40 a day can't beat that. Wow my back feels better already __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-07-2013, 07:37 PM	#30
DesertCat Registered User Join Date: Mar 2011 Location: Valley of the Sunstroke, Arizona Posts: 1,210	Re: Well I bascially got my pad build for my building Looking good! Cool that you are doing so much of the work yourself and knowing that some things you don't want to I look forward to the day I will hopefully get to do the same. Congrats! Happy for you. __________________ My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131

03-07-2013, 11:51 PM	#31
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	Re: Well I bascially got my pad build for my building Glad to help out. That's going to be a nice shop. __________________ '68 Panel Project Boogie Chillin' '68 C-10 Ol' Green

03-08-2013, 03:24 PM	#32
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,670	Re: Well I bascially got my pad build for my building well done, you got a smoking deal on the lights and heater. used building stuff is hard to sell, being in the right place at the right time is everything __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

03-08-2013, 05:30 PM	#33
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: Well I bascially got my pad build for my building Looks like you're coming along Randy! I have a 150kBtu Reznor in my 40 x 60 and it heats it up fast. But I paid about 4 times what you did for it Everybody starts jonesing for parts when you take on these projects. Can't you fit a truck or two inbetween for everyone?

03-08-2013, 08:27 PM	#34
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building DesertCat, Thanks, this is my third time building a shop, I always wish they were done after awhile Pritch, your info was great!! Thanks _Ogre, your right I was lucky, Thanks David, this has me wore down, truck stuff is on back burner and actually may end up being on back burner for good in the future. The golf course deal may go through quicker than I thought it would. Be sure to stop by next time you come up, Thanks Here are some more pics, got the concrete done today, sitting trusses Tues. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-08-2013, 08:28 PM	#35
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building I am really happy with what has got done in 6 days, Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-08-2013, 08:50 PM	#36
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: Well I bascially got my pad build for my building Looks good! Keep at it. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

03-08-2013, 08:57 PM	#37
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,111	Re: Well I bascially got my pad build for my building WOW thats really coming along and looks great __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

03-09-2013, 08:52 AM	#38
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Well I bascially got my pad build for my building Looking good!! You'll be tearing apart trucks and have stuff stashed everywhere in no time... Lol Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

03-10-2013, 08:10 PM	#40
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Thanks guys. We didn't get anything done this weekend, I had a pool tourney Sat and it also rained all day and today it was cold and windy. Still planning in setting trusses Tues. Thanks again, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-11-2013, 09:17 AM	#41
468BIGBLOCK MEMBER OF THE JUNK MAN CLUB Join Date: Jul 2001 Location: paragould arkansas 72450 Posts: 425	Re: Well I bascially got my pad build for my building lookin fine!!! __________________ I LIKE 67-72 CHEVYS, I HAVE OWNED OVER 150 OF THEM IN THE LAST 25 YEARS..



Register or Log In To remove these advertisements.

03-14-2013, 08:23 AM	#42
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Thanks, its getting there got the trusses sat yesterday, duct lift and 4 guys in 3 1/2 hours. Pritch your idea was awesome!!!!! Got some cabinets bought now I just have to figure out whats the best way to paint them. Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-15-2013, 09:51 PM	#44
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	Re: Well I bascially got my pad build for my building I'm glad that worked out for you! I'm happy to help, even if it is just an idea instead of actual labor. That's sure going to be a nice shop __________________ '68 Panel Project Boogie Chillin' '68 C-10 Ol' Green

03-21-2013, 12:56 PM	#45
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Well we are gaining slowly, snow storm Tues, cold Wed, now snow again today, tomorrow and Sat, wow its setting us back but oh well it will get done sometime. Rod, my buddy is doing most of it, I try to help when I get off work, but he is gone by then most of the time. I decided to go with tin on inner walls and ceiling now and ended up putting 2 windows in. Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-21-2013, 01:06 PM	#46
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: Well I bascially got my pad build for my building Looking good Randy! Are you going to put a storage area above the ceiling?

03-24-2013, 09:22 AM	#47
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Well I bascially got my pad build for my building Thanks David, just insulation no storage up there. We got all 4 sides done, got a bunch of snow yesterday and last night so the roof will have to wait for awhile __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-24-2013, 06:10 PM	#48
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Well I bascially got my pad build for my building Looking good Randy! __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

03-24-2013, 06:59 PM	#49
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Well I bascially got my pad build for my building Looking good Randy. What was your final accumulation amount? We had about 7-9". Posted via Mobile Device __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

Register or Log In To remove these advertisements.