OR Parting out 72 Suburban K10 350 TH350 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tll74** · 04-29-2012, 01:46 AM

Parting out 72 Suburban 4x4. THIS TREAD IS FOR THE SUBURBAN 0NLY PARTS. All the common Sub-PU parts are in a thread of there own in the PU board. http://67-72chevytrucks.com/vboard/s...d.php?t=521770 All prices are plus shipping.
Olive green deluxe rear door panels. Nice condition 75.00 pair SOLD
Fuel tank filler neck. 27.50 SOLD
Fuel tank vent tube. 27.50
Rear barn doors upper slides/locks. 35.00 pair
Fuel tank sending unit. Just replaced with new repop. 30.00 SOLD
Tail light lens. Very nice DQ. 12.50 each SOLD
LH barn door lower latch. 12.50
RH barn door upper, lower and center latches. 32.50
Tail light housings 7.50 each
RH rear window regulater. 20.00
LH rear window regulater. 20.00
Exhaust hangers front and rear. 22.50 SOLD
Lock set and switch with matching key. 35.00 SOLD

**tll74** · 04-29-2012, 01:51 AM

pics

**tll74** · 04-29-2012, 02:26 AM

Fuel tank. A few minor dings, very solid, nice inside. 75.00 SOLD
Fuel tanks straps. 25.00 SOLD
Rear AC complete with wiring, cover, and hoses. 175.00
Upper molding kit with barn doors. With all the clips. Very nice condition. No dings. 125.00 SOLD I have a second set for a lift gate.

**72k5zl1** · 04-29-2012, 09:42 AM

how are the headliner panels?

**tll74** · 04-29-2012, 04:00 PM

Quote:

Originally Posted by 72k5zl1

how are the headliner panels?

What headliner panels......worse than bad they are totally gone. Picking up a 72 Tuesday it may have some. Thanks, Tom

Slinger60 · 04-29-2012, 07:11 PM

Interested in the spare tire clamp if its original. And also looking for a driverside front blinker assembly, dont need the lens. And if possible would need the other plug for blinker assembly. The one that goes into rad. support.
And the outside front bumber brackets if you have any. Thanks Shawn.

**LockDoc** · 04-29-2012, 08:15 PM

-
Price on the plastic plugs shipped to Iowa 50171.

Thanks.
LockDoc

**tll74** · 04-30-2012, 01:24 AM

Quote:

Originally Posted by Slinger60

Interested in the spare tire clamp if its original. And also looking for a driverside front blinker assembly, dont need the lens. And if possible would need the other plug for blinker assembly. The one that goes into rad. support.
And the outside front bumber brackets if you have any. Thanks Shawn.

I didn't list the spare clamp because I think I have already sold it. 15.00 on a nice turn lens housing. So are you needing a pig tail cut off the main harness? If so 5.00. The front bumper brackets off this are already sold. I'm picking up a 71 K20 tomorrrow. I'll check them and get back to you.

Quote:

Originally Posted by LockDoc

-
Price on the plastic plugs shipped to Iowa 50171.
Thanks.
LockDoc

.25 cents each for nice ones. I have save them from the last three sub's parted. They should fit in a envelope. Not sure of that cost, I'll check.

Thanks, Tom

**botmfedr1** · 04-30-2012, 10:30 AM

Tom,

Do you have anymore of the upper molding clips? If you'll part those out, how much would you need out of them?
Posted via Mobile Device

**LockDoc** · 04-30-2012, 11:16 AM

Quote:

Originally Posted by tll74

.25 cents each for nice ones. I have save them from the last three sub's parted. They should fit in a envelope. Not sure of that cost, I'll check.

Thanks, Tom

Thanks Tom. I will take all of the plastic plugs, including the larger oval ones. Just figure on putting them in a padded envelope to ship to ZIP 50171 and PM me the total cost and payment info..

LockDoc

budnikguy · 04-30-2012, 12:00 PM

Will take matching lock and key set...can you put with other items and ship all at once?!

Adam

**restart42** · 04-30-2012, 03:37 PM

Tom,, willtake the "Fuel tank filler neck. 27.50", (Thats the one with the
overflow tube ?).
If you haven't sent the headliner bows,and spare tire clamp, maybe
stuff it all in one package,,,
Thanks,,,Pat

**tll74** · 05-01-2012, 01:07 AM

Quote:

Originally Posted by botmfedr1

Tom,

Do you have anymore of the upper molding clips? If you'll part those out, how much would you need out of them?
Posted via Mobile Device

I have some from the third one that I would part with .50 each. How many do you need? I pulled all the moldings except the LH rear and rear doors (they were gone).

Quote:

Originally Posted by LockDoc

Thanks Tom. I will take all of the plastic plugs, including the larger oval ones. Just figure on putting them in a padded envelope to ship to ZIP 50171 and PM me the total cost and payment info..

LockDoc

Leon, Do you want all that I have among the 4 trucks? Picking up a 72 402 truck tomorrow. I would like to get .50 on the large ovals.

Quote:

Originally Posted by budnikguy

Will take matching lock and key set...can you put with other items and ship all at once?!

Adam

Adam, no problem.

Quote:

Originally Posted by restart42

Tom,, willtake the "Fuel tank filler neck. 27.50", (Thats the one with the
overflow tube ?).
If you haven't sent the headliner bows,and spare tire clamp, maybe
stuff it all in one package,,,
Thanks,,,Pat

Pat, no I haven't shipped yet. I'll look into putting it with the other stuff and report back.

Thanks, Tom

**haskell** · 05-01-2012, 12:02 PM

Do you have a suburban splash shield? The one the goes behind the driver side rear wheel?
If so condition and price.

**restart42** · 05-01-2012, 12:39 PM

[QUOTE=tll74;5346458Pat, no I haven't shipped yet. I'll look into putting it with the other stuff and report back.
Thanks, Tom[/QUOTE]

Thanks,,PM me the $$$,
Pat

**richard2717** · 05-01-2012, 01:16 PM

Tom
If you come across a rust free lower DS quarter from rear of driver door to front of wheel arch I would be interested in it. need from the bottom up to the crease just above the lower wide mouldings.

Thanks
Richard

budnikguy · 05-01-2012, 04:12 PM

Money sent for locks...

**LockDoc** · 05-01-2012, 11:33 PM

Quote:

Originally Posted by tll74

Leon, Do you want all that I have among the 4 trucks? Picking up a 72 402 truck tomorrow. I would like to get .50 on the large ovals.

Thanks, Tom

Tom,

Yes, I will take the plugs from all of the SUBURBANS.

LockDoc

**LockDoc** · 05-25-2012, 11:39 PM

Quote:

Originally Posted by LockDoc

Tom,

Yes, I will take the plugs from all of the SUBURBANS.

LockDoc

Tom,

Still interested in the plastic interior plugs from this thread and the Parchment seat belts from your other Suburban parts thread.

LockDoc

**tll74** · 05-26-2012, 04:21 PM

Quote:

Originally Posted by LockDoc

Tom,

Still interested in the plastic interior plugs from this thread and the Parchment seat belts from your other Suburban parts thread.

LockDoc

I sent you a PM yesterday about these. Thanks, Tom
Posted via Mobile Device

**LockDoc** · 05-27-2012, 07:05 PM

Quote:

Originally Posted by tll74

I sent you a PM yesterday about these. Thanks, Tom
Posted via Mobile Device

Tom,

Your latest PM didn't make it through. I double checked and the last PM I received from you was 5-4-2012. I guess you will have to try it again.

Thanks.
Leon

lousblown55chevy · 05-29-2012, 06:55 PM

need front and rear bumper brackets for a 4x4

Scott Johnson · 05-29-2012, 07:59 PM

If you have any plastic plugs left after you take care of tll74 I am interested in a complete set both the small and larger ones.

Thanks
Scott

1972_GMC · 05-31-2012, 03:28 PM

Are the front and rear door panels still available?
Posted via Mobile Device

ThreeQtr · 05-31-2012, 09:55 PM

Do you still have the upper molding trim?

Is there a safe and reasonable (price) way to send to 34953?

04-29-2012, 01:46 AM	#1
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Parting out 72 Suburban K10 350 TH350 Parting out 72 Suburban 4x4. THIS TREAD IS FOR THE SUBURBAN 0NLY PARTS. All the common Sub-PU parts are in a thread of there own in the PU board. http://67-72chevytrucks.com/vboard/s...d.php?t=521770 All prices are plus shipping. Olive green deluxe rear door panels. Nice condition 75.00 pair SOLD Fuel tank filler neck. 27.50 SOLD Fuel tank vent tube. 27.50 Rear barn doors upper slides/locks. 35.00 pair Fuel tank sending unit. Just replaced with new repop. 30.00 SOLD Tail light lens. Very nice DQ. 12.50 each SOLD LH barn door lower latch. 12.50 RH barn door upper, lower and center latches. 32.50 Tail light housings 7.50 each RH rear window regulater. 20.00 LH rear window regulater. 20.00 Exhaust hangers front and rear. 22.50 SOLD Lock set and switch with matching key. 35.00 SOLD __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw Last edited by tll74; 09-04-2012 at 01:15 AM.

04-29-2012, 01:51 AM	#2
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 Suburban K10 350 TH350 pics Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

04-29-2012, 02:26 AM	#3
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 Suburban K10 350 TH350 Fuel tank. A few minor dings, very solid, nice inside. 75.00 SOLD Fuel tanks straps. 25.00 SOLD Rear AC complete with wiring, cover, and hoses. 175.00 Upper molding kit with barn doors. With all the clips. Very nice condition. No dings. 125.00 SOLD I have a second set for a lift gate. Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw Last edited by tll74; 09-04-2012 at 12:52 AM.

04-29-2012, 09:42 AM	#4
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,607	Re: Parting out 72 Suburban K10 350 TH350 how are the headliner panels? __________________ my build threads, 68 pro touring, auto cross c10 (mid life crisis) http://67-72chevytrucks.com/vboard/s...d.php?t=464109 website http://www.sauersgarage.com/

04-29-2012, 07:11 PM	#6
Slinger60 Registered User Join Date: Jul 2011 Location: Redding Ca. Posts: 207	Re: Parting out 72 Suburban K10 350 TH350 Interested in the spare tire clamp if its original. And also looking for a driverside front blinker assembly, dont need the lens. And if possible would need the other plug for blinker assembly. The one that goes into rad. support. And the outside front bumber brackets if you have any. Thanks Shawn. __________________ 1969 C10 LWB GMC. 1970 K5 Blazer 1971 K10 Burb Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=529970 Shawn

04-29-2012, 08:15 PM	#7
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,331	Re: Parting out 72 Suburban K10 350 TH350 - Price on the plastic plugs shipped to Iowa 50171. Thanks. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

04-30-2012, 10:30 AM	#9
botmfedr1 Senior Member Join Date: Feb 2008 Location: Harlingen, TX Posts: 1,098	Re: Parting out 72 Suburban K10 350 TH350 Tom, Do you have anymore of the upper molding clips? If you'll part those out, how much would you need out of them? Posted via Mobile Device

04-30-2012, 12:00 PM	#11
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Parting out 72 Suburban K10 350 TH350 Will take matching lock and key set...can you put with other items and ship all at once?! Adam

04-30-2012, 03:37 PM	#12
restart42 Junior Member Join Date: Apr 2000 Location: Bronx, New York City Posts: 121	Re: Parting out 72 Suburban K10 350 TH350 Tom,, willtake the "Fuel tank filler neck. 27.50", (Thats the one with the overflow tube ?). If you haven't sent the headliner bows,and spare tire clamp, maybe stuff it all in one package,,, Thanks,,,Pat __________________ Pat 72 GMC Suburban,4X4,402BB

05-01-2012, 12:02 PM	#14
haskell Registered User Join Date: Apr 2008 Location: Indianapolis, IN Posts: 391	Re: Parting out 72 Suburban K10 350 TH350 Do you have a suburban splash shield? The one the goes behind the driver side rear wheel? If so condition and price. __________________ 1969 Chev Longhorn Custom Camper 1955 Buick Century Estate Wagon 1963 Buick Riviera 1953 Chevy 3100 Panel 1967 C-20 V8 4 speed 1951 Willys Jeep Wagon 1956 Chevy Suburban

05-01-2012, 12:39 PM	#15
restart42 Junior Member Join Date: Apr 2000 Location: Bronx, New York City Posts: 121	Re: Parting out 72 Suburban K10 350 TH350 [QUOTE=tll74;5346458Pat, no I haven't shipped yet. I'll look into putting it with the other stuff and report back. Thanks, Tom[/QUOTE] Thanks,,PM me the $$$, Pat __________________ Pat 72 GMC Suburban,4X4,402BB

05-01-2012, 01:16 PM	#16
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,887	Re: Parting out 72 Suburban K10 350 TH350 Tom If you come across a rust free lower DS quarter from rear of driver door to front of wheel arch I would be interested in it. need from the bottom up to the crease just above the lower wide mouldings. Thanks Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

05-01-2012, 04:12 PM	#17
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Parting out 72 Suburban K10 350 TH350 Money sent for locks...

05-29-2012, 06:55 PM	#22
lousblown55chevy Registered User Join Date: Feb 2012 Location: Saint Charles MO. Posts: 197	Re: Parting out 72 Suburban K10 350 TH350 need front and rear bumper brackets for a 4x4

05-29-2012, 07:59 PM	#23
Scott Johnson Junior Member Join Date: Feb 2003 Location: Louisiana Posts: 281	Re: Parting out 72 Suburban K10 350 TH350 If you have any plastic plugs left after you take care of tll74 I am interested in a complete set both the small and larger ones. Thanks Scott __________________ 71 C10 Step Daily Driver 72 K10 Suburban Work in Progress www.louisianaclassictruckclub.com



Register or Log In To remove these advertisements.

05-31-2012, 03:28 PM	#24
1972_GMC Registered User Join Date: May 2012 Location: Portland, OR Posts: 6	Re: Parting out 72 Suburban K10 350 TH350 Are the front and rear door panels still available? Posted via Mobile Device

05-31-2012, 09:55 PM	#25
ThreeQtr Registered User Join Date: Dec 2010 Location: Port St Lucie,FL Posts: 203	Re: Parting out 72 Suburban K10 350 TH350 Do you still have the upper molding trim? Is there a safe and reasonable (price) way to send to 34953?

Register or Log In To remove these advertisements.