NV Wanted, OEM screws for a 1971 Door Panel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71CHEVYSHORTBED402** · 11-30-2023, 09:11 PM

I think 69-70 panels used the same screw.

So here I am, finishing a rebuild by installing door panels, and oh-no, after 8 years, some where along the way I lost a door panel screw..................HELP ME!

I "never" lose this stuff, figures it would happen when wrapping this truck up.

I only need one, but am open to buying more for sure.

Here's the screw, with full description. It's next to an "imposter" as well. Perhaps the "mirror screw" installed some panels, but my panels take a different screw.

Thank you

**71CHEVYSHORTBED402** · 11-30-2023, 09:17 PM

Open to trade on an agreed level. I have an NOS set (6) of original Philips head sport mirror screws with 1/4-20 x 3/4" threads, or if you'd rather, a full NOS set of star head screws for the same purpose (GM 9438166). I have eight or 10 of the star ones, should someone want those for a door panel. They produced two different heads, for the mirrors at least. I also have a set of NOS interior door handles.

**71CHEVYSHORTBED402** · 12-01-2023, 06:39 PM

More trade bait

deal on an NOS C10 Bendix brake booster.

**LockDoc** · 12-01-2023, 09:00 PM

-
I will check in the morning and see what I have. I hope I can tell the difference.

I made myself a note....

LockDoc

**71CHEVYSHORTBED402** · 12-01-2023, 09:02 PM

Thank you Doc, appreciate it.

**LockDoc** · 12-02-2023, 01:16 PM

-
I have a lot of door panel screws but very few of them are nice.

I have 2 that are pretty decent. One of them has a built in washer that can be removed.

PM me your address and I will send the two best ones to you to see if you can use either one.....

LockDoc

**71CHEVYSHORTBED402** · 12-04-2023, 05:51 PM

For Leon. Both 1/4-20 x 3/4, countersunk heads

**LockDoc** · 12-04-2023, 06:03 PM

Quote:

Originally Posted by 71CHEVYSHORTBED402

For Leon. Both 1/4-20 x 3/4, countersunk heads

Thanks, I will try to remember to check tomorrow.

Screws are on the way.

LockDoc

**Madkidd007** · 12-16-2023, 09:00 PM

Quote:

Originally Posted by LockDoc

-
I have a lot of door panel screws but very few of them are nice.

I have 2 that are pretty decent. One of them has a built in washer that can be removed.

PM me your address and I will send the two best ones to you to see if you can use either one.....

LockDoc

Hey doc long time, can I get in on this. I don’t need nice ones, just would like to have correct ones

**LockDoc** · 12-16-2023, 10:59 PM

Quote:

Originally Posted by Madkidd007

Hey doc long time, can I get in on this. I don’t need nice ones, just would like to have correct ones

PM sent.

LockDoc

**71CHEVYSHORTBED402** · 12-18-2023, 05:53 PM

Leon, they're just what I was looking for, nice, and spare flush washer too. Please let me know if you can use the spare screws I mentioned for door panels or mirrors. 6 NOS Phillips head or 10 NOS star head.

Appreciate it a lot Leon.

11-30-2023, 09:11 PM	#1
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,152	Wanted, OEM screws for a 1971 Door Panel I think 69-70 panels used the same screw. So here I am, finishing a rebuild by installing door panels, and oh-no, after 8 years, some where along the way I lost a door panel screw..................HELP ME! I "never" lose this stuff, figures it would happen when wrapping this truck up. I only need one, but am open to buying more for sure. Here's the screw, with full description. It's next to an "imposter" as well. Perhaps the "mirror screw" installed some panels, but my panels take a different screw. Thank you Attached Images __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring the truck from ground up. With assys, the guide accts for 1000s details, OEM identifications & part numbers, written in short order. 700+ images of assm., illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025 Last edited by 71CHEVYSHORTBED402; 11-30-2023 at 09:23 PM.

11-30-2023, 09:17 PM	#2
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,152	Re: Wanted, OEM screws for a 1971 Door Panel Open to trade on an agreed level. I have an NOS set (6) of original Philips head sport mirror screws with 1/4-20 x 3/4" threads, or if you'd rather, a full NOS set of star head screws for the same purpose (GM 9438166). I have eight or 10 of the star ones, should someone want those for a door panel. They produced two different heads, for the mirrors at least. I also have a set of NOS interior door handles. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring the truck from ground up. With assys, the guide accts for 1000s details, OEM identifications & part numbers, written in short order. 700+ images of assm., illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025 Last edited by 71CHEVYSHORTBED402; 11-30-2023 at 10:31 PM.

12-01-2023, 06:39 PM	#3
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,152	Re: Wanted, OEM screws for a 1971 Door Panel More trade baitdeal on an NOS C10 Bendix brake booster. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring the truck from ground up. With assys, the guide accts for 1000s details, OEM identifications & part numbers, written in short order. 700+ images of assm., illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025

12-01-2023, 09:00 PM	#4
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,354	Re: Wanted, OEM screws for a 1971 Door Panel - I will check in the morning and see what I have. I hope I can tell the difference. I made myself a note.... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

12-01-2023, 09:02 PM	#5
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,152	Re: Wanted, OEM screws for a 1971 Door Panel Thank you Doc, appreciate it. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring the truck from ground up. With assys, the guide accts for 1000s details, OEM identifications & part numbers, written in short order. 700+ images of assm., illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025

12-02-2023, 01:16 PM	#6
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,354	Re: Wanted, OEM screws for a 1971 Door Panel - I have a lot of door panel screws but very few of them are nice. I have 2 that are pretty decent. One of them has a built in washer that can be removed. PM me your address and I will send the two best ones to you to see if you can use either one..... LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

12-04-2023, 05:51 PM	#7
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,152	Re: Wanted, OEM screws for a 1971 Door Panel For Leon. Both 1/4-20 x 3/4, countersunk heads Attached Images __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring the truck from ground up. With assys, the guide accts for 1000s details, OEM identifications & part numbers, written in short order. 700+ images of assm., illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025

12-18-2023, 05:53 PM	#11
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,152	Re: Wanted, OEM screws for a 1971 Door Panel Leon, they're just what I was looking for, nice, and spare flush washer too. Please let me know if you can use the spare screws I mentioned for door panels or mirrors. 6 NOS Phillips head or 10 NOS star head. Appreciate it a lot Leon. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring the truck from ground up. With assys, the guide accts for 1000s details, OEM identifications & part numbers, written in short order. 700+ images of assm., illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.