[Hart_Rod]

Originally Posted by chewychevy67

I found someone with a 1967 Oldsmobile tilt-telescopic steering column. it has the 4 way flasher and no ignition in the column so I figured id try it on my column. I found out that you can simply remove the top from the tilt and simply use the top pieces from the tilt-telescopic and install. even the wiring harness just plugs in the same. The only mod is the light for the gear selector and light which should be no problem. Here are the pictures of the bottom part. If i set the column back to the gauges this should still be useable I hope and not too close to the driver. when I am finished ill put my seats in and check it out.

Slick!