The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

theastronaut · 02-27-2012, 05:47 PM

Fixing the w/s opening rust.

Cut out the old peice and made a new one on the shinker/stretcher. Test fitting it using magnets to hold it in place.

Welded in and ground smooth.

02-27-2012, 05:47 PM	#12
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,869	Re: '55 International Metal/Body/Paint Work Fixing the w/s opening rust. Cut out the old peice and made a new one on the shinker/stretcher. Test fitting it using magnets to hold it in place. Welded in and ground smooth. __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc Last edited by theastronaut; 12-03-2012 at 05:22 PM.