Thread
:
1966 F100 Short Bed Styleside Metal/Body/Paint Work
View Single Post
10-06-2021, 10:30 PM
#
258
theastronaut
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,870
Re: 1966 F100 Short Bed Styleside Metal/Body/Paint Work
Same process on all of the random shapes.
Top edge and corners of cowl masked on the flat then blocked out to establish a consistent starting point for the edge radius.
Lower seam lip blocked straight.
With the shaping finished I shot a couple coats of black SPI epoxy to seal up the areas that were low and needed filler, and to make the surface somewhat reflective so imperfections could be addressed. Some of the lower areas have 80g stratches showing and weird sanding patterns; those areas will be hidden under the inner fenders and shot with Raptor Liner later on so they were only quickly sanded for adhesion, not to correct their shape. The gloss level of the epoxy will really help with being able to spot fix the areas that need touching up, then shooting a few light coats of red epoxy so it's ready to wetsand and paint.
Back of the cab stripped and shot with epoxy. I left the drip rails and the cab corners bare since I'll be reworking those areas when fitting the doors.
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build
'65 C10 Highly Detailed Stock Restoration Thread
'78 Camaro Targa Roof Build
'55 International Metal/Body/Paint Work
'66 F100 Full Rotisserie Restoration
'40 Packard 120 Convertible Coupe Restoration
How To Restore and Detail an Original Gauge Cluster
How To Detail Sand Body Panels, Edges, Corners, Etc
theastronaut
View Public Profile
Find More Posts by theastronaut