Thread
:
1940 Packard 120 Convertible Restoration
View Single Post
07-29-2015, 11:15 AM
#
145
theastronaut
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,869
Re: 1940 Packard 120 Convertible Restoration
I have the right inner fender bottom welded in, and the rear seat pan welded in on the areas that I can get to. I'll have to flip it on the rotisserie to finish welding the middle section, there is about 16" in the middle that I can't reach from the top side.
With the seat pan in I mocked up the inner/outer rockers and floor pans so I could start on the inner B-pillar brace and finish the outer B-pillar section.
Bottom half of brace made.
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build
'65 C10 Highly Detailed Stock Restoration Thread
'78 Camaro Targa Roof Build
'55 International Metal/Body/Paint Work
'66 F100 Full Rotisserie Restoration
'40 Packard 120 Convertible Coupe Restoration
How To Restore and Detail an Original Gauge Cluster
How To Detail Sand Body Panels, Edges, Corners, Etc
theastronaut
View Public Profile
Find More Posts by theastronaut