Quote:
Originally Posted by HO455
Got the second row window sets installed! The support modification worked well on installation so now we'll see what the long run brings. It is hard to see in the photos but the seals no longer sag into the unsupported area. I did use a tip forwarded by the master "LockDoc" saying put some petroleum jelly on the frame to allow the seal to slide into place easier. Worked like a champ. I made sure all the tracks and rollers were lubed up with garage door lube. The windows now roll down and they work like they are new when going up too! 
Soaking the seals in the soapy water (Dawn) really helped with cleaning the old paint/over spray off of the seals.
Thanks again to Richard and Mel. |
Quick question, does it matter what order the door glass or the divider goes in? I'm getting ready to do this and don't want to break anything,
.