Mar-k Molding dealer? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Leonard1 · 05-25-2017, 09:33 AM

Where do you guys buy your Mar-k molding? Direct, or from a vendor?

**special-K** · 05-25-2017, 10:10 AM

Direct.

67ChevyRedneck · 05-25-2017, 10:17 AM

And you've picked a good time. It's not up, but they usually do a 10% off and/or free shipping for Memorial Day Weekend.

I'm finally going to order a set of 67/68 lower trim for my truck.

dfosh · 05-25-2017, 12:50 PM

Just got a set . It was a five week wait their was a piece that was on b.o . It will be a while before I am ready to install but it looks great .Didn't know about discount.

67ChevyRedneck · 05-25-2017, 12:53 PM

They *usually* only do a labor day and memorial day "sale" from the best I can tell. They don't really advertise it all that well...

dfwright · 05-25-2017, 01:56 PM

I bought mine from Brother's. If you order an entire set, they drop ship Mar-K, or at least used to, I called to verify this fact before ordering. Apparently if you order pieces, you may get whatever, but with an entire set, it's Mar-K.

Brother's does offer some discount over ordering direct, at least when I did it.

hewittca · 05-25-2017, 01:57 PM

Quote:

Originally Posted by 67ChevyRedneck

They *usually* only do a labor day and memorial day "sale" from the best I can tell. They don't really advertise it all that well...

This is good to know. I really want a set of 67/68 side trim as well, but am finding it difficult to pull together enough courage to hit that "Place Order" button with that asking price.

**leddzepp** · 05-25-2017, 02:24 PM

Quote:

Originally Posted by dfwright

I bought mine from Brother's. If you order an entire set, they drop ship Mar-K, or at least used to, I called to verify this fact before ordering. Apparently if you order pieces, you may get whatever, but with an entire set, it's Mar-K.

Brother's does offer some discount over ordering direct, at least when I did it.

I ordered an entire set from them as I was told the same thing on the phone. They pulled a bait and switch in my case so I got a refund and ordered direct.

dfwright · 05-25-2017, 02:44 PM

Quote:

Originally Posted by leddzepp

I ordered an entire set from them as I was told the same thing on the phone. They pulled a bait and switch in my case so I got a refund and ordered direct.

That's really disappointing to hear. As I recall, the discount over direct was not inconsequential, but if there's a risk of not getting the MAR-K product, then it's definitely not worth it.

67ChevyRedneck · 05-25-2017, 03:13 PM

Quote:

Originally Posted by hewittca

This is good to know. I really want a set of 67/68 side trim as well, but am finding it difficult to pull together enough courage to hit that "Place Order" button with that asking price.

What sucks is they raised their price this year after it being the same for the last 5 or 6 years... so now I'm basically going to be paying what was full price last year....

hewittca · 05-25-2017, 03:32 PM

Quote:

Originally Posted by 67ChevyRedneck

What sucks is they raised their price this year after it being the same for the last 5 or 6 years... so now I'm basically going to be paying what was full price last year....

Haha, yes I noticed that when I looked today. I might just have to wait until the next cycle of trimless trucks becomes popular again and people start selling the trim they bought 10 years ago...

**Richard** · 05-25-2017, 09:27 PM

Wes with Classic Hearbeat deals with Mar-K

Leonard1 · 05-25-2017, 09:49 PM

Quote:

Originally Posted by 67ChevyRedneck

What sucks is they raised their price this year after it being the same for the last 5 or 6 years... so now I'm basically going to be paying what was full price last year....

I saw that too, maybe they'll throw in shipping...

Leonard1 · 05-25-2017, 09:55 PM

Quote:

Originally Posted by Richard

Wes with Classic Hearbeat deals with Mar-K

I sent him a PM the other day, and he doesn't handle it.

Leonard1 · 05-26-2017, 07:42 PM

Still no specials posted?

67ChevyRedneck · 05-26-2017, 10:22 PM

I noticed the same thing today...

I knew I should have bought it last year.

67ChevyRedneck · 05-30-2017, 02:13 PM

So, I asked the question and got a response:

Quote:

Hi Jesse,

No, we don’t have a Memorial Day Sale this year.

Thank you,

Audrey

MAR-K Specialized Manufacturing
6625 West Wilshire Boulevard
Oklahoma City, Oklahoma 73132-5449

I'm pretty sure they also used to do a July 4th, Labor Day, and Thanksgiving sales... I'm in no hurry, so I'll just wait to see if they have a sale then.

sdailey · 05-30-2017, 02:21 PM

What ever happened to their rep that was on the board regularly?

67ChevyRedneck · 05-30-2017, 02:27 PM

I looked into that too... it was MAR-Ktech and they've let their vendor status drop to pink and hasn't made a post since December 2015 and the last "activity" was January 2017.

...maybe I do need to get my trim now...

duallyjams · 05-31-2017, 05:39 PM

Quote:

Originally Posted by 67ChevyRedneck

I looked into that too... it was MAR-Ktech and they've let their vendor status drop to pink and hasn't made a post since December 2015 and the last "activity" was January 2017.

...maybe I do need to get my trim now...

when they were a vendor they posted there sale on here, I've bought 4 wood bed kits that way

67ChevyRedneck · 07-01-2017, 09:41 PM

4th of July sale... thinking of buying the 67/68 trim...

Quote:

Celebrate Independence Day with 10% off parts!

Saturday, July 1 - Wednesday, July 5, 2017.

Please go to our FACEBOOK PAGE for the coupon code. Discount does not apply to Jobbers/Dealers. Code can only be used once during this time.

USABDAY17

Leonard1 · 07-05-2017, 11:01 AM

Luckily, I saw this today! I got my tailgate trim ordered. I already cleaned and installed the old side trim. It looks decent, I guess, but I don't want to drop another grand on trim.

67ChevyRedneck · 07-05-2017, 11:23 AM

I bit the bullet and ordered the 67/68 side trim... I won't need it for quite a while, but at least it's paid for now.

**Hart_Rod** · 07-06-2017, 09:10 AM

Quote:

Originally Posted by sdailey

What ever happened to their rep that was on the board regularly?

James retired a couple of years ago...

68Gold/white · 07-06-2017, 11:21 AM

Quote:

Originally Posted by 67ChevyRedneck

I bit the bullet and ordered the 67/68 side trim... I won't need it for quite a while, but at least it's paid for now.

How much $$$, if you care to tell...if not, I understand...

05-25-2017, 09:33 AM	#1
Leonard1 Registered User Join Date: Nov 2005 Location: Paducah, Ky Posts: 400	Mar-k Molding dealer? Where do you guys buy your Mar-k molding? Direct, or from a vendor?

05-25-2017, 10:10 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Mar-k Molding dealer? Direct. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-25-2017, 10:17 AM	#3
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Mar-k Molding dealer? And you've picked a good time. It's not up, but they usually do a 10% off and/or free shipping for Memorial Day Weekend. I'm finally going to order a set of 67/68 lower trim for my truck. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

05-25-2017, 12:50 PM	#4
dfosh Registered User Join Date: Oct 2007 Location: greeneville tn Posts: 237	Re: Mar-k Molding dealer? Just got a set . It was a five week wait their was a piece that was on b.o . It will be a while before I am ready to install but it looks great .Didn't know about discount.

05-25-2017, 12:53 PM	#5
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Mar-k Molding dealer? They usually only do a labor day and memorial day "sale" from the best I can tell. They don't really advertise it all that well... __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

05-25-2017, 01:56 PM	#6
dfwright Registered User Join Date: Jan 2009 Location: San Antonio, Texas Posts: 1,374	Re: Mar-k Molding dealer? I bought mine from Brother's. If you order an entire set, they drop ship Mar-K, or at least used to, I called to verify this fact before ordering. Apparently if you order pieces, you may get whatever, but with an entire set, it's Mar-K. Brother's does offer some discount over ordering direct, at least when I did it. __________________ 1972 C10 LWB, 350/350 Deconstruction began 5/2009, mostly completed restoration, 5/2017

05-25-2017, 09:27 PM	#12
Richard Senior Member Join Date: Dec 1999 Location: Southern California Posts: 2,698	Re: Mar-k Molding dealer? Wes with Classic Hearbeat deals with Mar-K __________________ Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746

05-26-2017, 07:42 PM	#15
Leonard1 Registered User Join Date: Nov 2005 Location: Paducah, Ky Posts: 400	Re: Mar-k Molding dealer? Still no specials posted?

05-26-2017, 10:22 PM	#16
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Mar-k Molding dealer? I noticed the same thing today... I knew I should have bought it last year. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

05-30-2017, 02:21 PM	#18
sdailey The Few, The Proud Join Date: Jun 2007 Location: Ball Ground, Georgia Posts: 1,830	Re: Mar-k Molding dealer? What ever happened to their rep that was on the board regularly? __________________ Shannon

05-30-2017, 02:27 PM	#19
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Mar-k Molding dealer? I looked into that too... it was MAR-Ktech and they've let their vendor status drop to pink and hasn't made a post since December 2015 and the last "activity" was January 2017. ...maybe I do need to get my trim now... __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-05-2017, 11:01 AM	#22
Leonard1 Registered User Join Date: Nov 2005 Location: Paducah, Ky Posts: 400	Re: Mar-k Molding dealer? Luckily, I saw this today! I got my tailgate trim ordered. I already cleaned and installed the old side trim. It looks decent, I guess, but I don't want to drop another grand on trim.

07-05-2017, 11:23 AM	#23
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Mar-k Molding dealer? I bit the bullet and ordered the 67/68 side trim... I won't need it for quite a while, but at least it's paid for now. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.