a few pics - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67cheby** · 11-17-2009, 04:02 PM

my dropmember will be here on thursday ... going lower !!

SCOTI · 11-17-2009, 08:31 PM

Quote:

Originally Posted by bmfpeterson

Heres a few more

I would suggest 'rounding-off' the corner of the pass side firewall so it matches the drivers side. Do it now..... vs. after the bodywork & paint is done because once you step back & look @ it, you'll ask yourself "why didn't I do it" . . . .....

**Hart_Rod** · 11-17-2009, 10:01 PM

Quote:

Originally Posted by SCOTI

I would suggest 'rounding-off' the corner of the pass side firewall so it matches the drivers side. Do it now..... vs. after the bodywork & paint is done because once you step back & look @ it, you'll ask yourself "why didn't I do it" . . . .....

BTDT....

C20-67_N_MO · 11-17-2009, 10:10 PM

Quote:

Originally Posted by 68GenIII

Looking good. You are way ahead of me as well. Keep up the good work!

Yeah me too buddy.

Quote:

Originally Posted by bmfpeterson

Thanks guys!

The suspension components are mostly stock. the bump stops are shaved off the lower arms and then just painted and new ball joints/cross shafts. The spindles are cpp either 3" or 2.5" drop on the spindles. not sure how much drop exactly but there are threads on here that spell out that setup. pretty cheap and effective!

then all I did was a air bag plate on the top and cups in the coil pockets. Also I got my C-Notch bolted in this weekend too.

On the cab I got the inner outer rocker panels done cab corners in. welded up gas cap hole, shaved firewall and some of the floor. also media blasted the cab. so it's ready to go to paint, but my pocket isn't yet. haha

all I need is to get a bunch of money to Finish it up! LOL

Very cool.

I talked to ECE on my LWB and doing a 3.5/4" drop on mine.
Reason - I want enough suspension travel want on the on ramps to haul butt and not have to worry about bottoming out.
Hoping it will still be as nice as Nates!

Rokcrln · 11-17-2009, 10:15 PM

Quote:

Originally Posted by Hart_Rod

BTDT....

It's ok Rob I do this for a living and my DD has a plastic plate over the A/C hole

My Daily Driver!
[IMG]

[/IMG]

But for customers I do this! I still have the main hole to do once the new A/C shows up for fitment and tabs.

[IMG]

[/IMG]

Lemon Drop!!
[IMG]

[/IMG]

Kevin
LFD Inc.

SCOTI · 11-18-2009, 12:56 AM

I only mention it because for my RetroRod project I just shaved the holes. Every time I would look @ it after, I thought it lacked symmetry. When I started messing w/my Beater, I went ahead & rounded the pass side & capped the gutter. What a difference as far as cleaning it up & making it flow so much better....

bmfpeterson · 11-18-2009, 01:54 PM

where the hell were you guys 3 months ago? that looks so clean! the truck is at paint and now I don't know what to do!!!!!!! I def think it looks way cleaner rounded to match the driver side, but the truck is there at the paint shop--- i have no room to take it home and finish it and I don't even want to ask him how much to round it out.

If I round the passenger side corner wouldn't I have to take the whole lip out of the top of the firewall across from passenger side to driver side??

What do I do now????????

Scoti---you are right on! how much work was it? i assume you had to add sheet to bring it closer to the outside?

SCOTI · 11-18-2009, 01:58 PM

Quote:

Originally Posted by bmfpeterson

where the hell were you guys 3 months ago? that looks so clean! the truck is at paint and now I don't know what to do!!!!!!! I def think it looks way cleaner rounded to match the driver side, but the truck is there at the paint shop--- i have no room to take it home and finish it and I don't even want to ask him how much to round it out.

If I round the passenger side corner wouldn't I have to take the whole lip out of the top of the firewall across from passenger side to driver side??

What do I do now????????

Check w/them 1st & see how much. Maybe it won't be as bad as you're anticipating.

bmfpeterson · 11-20-2009, 09:49 PM

ok so I talked to the painter and for the money it would cost I am going to have him do it now because I am sure I would be killing myself over it later! he said he is ready to start next week!!! I'll post pics as soon as I can.

SCOTI · 11-20-2009, 10:26 PM

Quote:

Originally Posted by bmfpeterson

ok so I talked to the painter and for the money it would cost I am going to have him do it now because I am sure I would be killing myself over it later! he said he is ready to start next week!!! I'll post pics as soon as I can.

See . . .... Good thing you checked huh

. It will be worth it!

bmfpeterson · 11-23-2009, 12:58 PM

Scoti-- you were on the money he said maybe around $300 he should be able to get it worked out. And if i'm going to spend $6000 on paint then the 300 is definitely worth it! he said he would start on it tomorrow!

**FRENCHBLUE72** · 11-23-2009, 03:12 PM

Looking good I still need to tear mine back down to do the frame....

**FRENCHBLUE72** · 11-23-2009, 04:55 PM

cannot delte multiply posts

bmfpeterson · 11-24-2009, 02:47 PM

so he went ahead and started yesterday on the firewall and its looking good. should be done today with the firewall....

**67cheby** · 11-24-2009, 02:53 PM

SWEET, i think i am going to have to do mine

SCOTI · 11-24-2009, 02:53 PM

Much better.

bmfpeterson · 11-24-2009, 02:55 PM

what a difference!!! I would have been so mad at myself if i wouldn't have done it.. he is going to cut out the hump in the right side too. if you can understand what I'm talking about???

thanks scoti its all because of you! lol

bmfpeterson · 12-04-2009, 01:22 AM

got out the plasma and had some fun

bmfpeterson · 12-09-2009, 04:57 PM

Ok so I cut out the wheel wells in the bed and dropped off the bed at the painters.the cab doors fenders are ready for paint. glad i cleaned up the firewall!

bmfpeterson · 12-09-2009, 05:02 PM

..

dan468 · 12-11-2009, 05:04 PM

are you leaving the drip rails?

bmfpeterson · 12-13-2009, 09:21 PM

yep the drip rails are here to stay!

bmfpeterson · 01-16-2010, 03:21 PM

OK so I haven't had much time to do anything but work latley...... but plan on hittn hard when I get back from this next horse show next week...

here are a couple pics I like to just sit at home and stare at while im drinkn beer.....

dan468 · 01-16-2010, 05:04 PM

looks good!!!

**yote1234** · 01-16-2010, 06:44 PM

looks great! hope to see it on the east valley roads soon!

11-17-2009, 04:02 PM	#26
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: a few pics my dropmember will be here on thursday ... going lower !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-18-2009, 12:56 AM	#31
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,911	Re: a few pics I only mention it because for my RetroRod project I just shaved the holes. Every time I would look @ it after, I thought it lacked symmetry. When I started messing w/my Beater, I went ahead & rounded the pass side & capped the gutter. What a difference as far as cleaning it up & making it flow so much better.... Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

11-18-2009, 01:54 PM	#32
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: a few pics where the hell were you guys 3 months ago? that looks so clean! the truck is at paint and now I don't know what to do!!!!!!! I def think it looks way cleaner rounded to match the driver side, but the truck is there at the paint shop--- i have no room to take it home and finish it and I don't even want to ask him how much to round it out. If I round the passenger side corner wouldn't I have to take the whole lip out of the top of the firewall across from passenger side to driver side?? What do I do now???????? Scoti---you are right on! how much work was it? i assume you had to add sheet to bring it closer to the outside? Last edited by bmfpeterson; 11-18-2009 at 02:00 PM.

11-20-2009, 09:49 PM	#34
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: a few pics ok so I talked to the painter and for the money it would cost I am going to have him do it now because I am sure I would be killing myself over it later! he said he is ready to start next week!!! I'll post pics as soon as I can.

11-23-2009, 12:58 PM	#36
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: a few pics Scoti-- you were on the money he said maybe around $300 he should be able to get it worked out. And if i'm going to spend $6000 on paint then the 300 is definitely worth it! he said he would start on it tomorrow!

11-23-2009, 03:12 PM	#37
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: a few pics Looking good I still need to tear mine back down to do the frame.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-23-2009, 04:55 PM	#38
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: a few pics cannot delte multiply posts __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 11-23-2009 at 04:59 PM.

11-24-2009, 02:47 PM	#39
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: a few pics so he went ahead and started yesterday on the firewall and its looking good. should be done today with the firewall.... Attached Images

11-24-2009, 02:53 PM	#40
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: a few pics SWEET, i think i am going to have to do mine __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-24-2009, 02:53 PM	#41
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,911	Re: a few pics Much better. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

11-24-2009, 02:55 PM	#42
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: a few pics what a difference!!! I would have been so mad at myself if i wouldn't have done it.. he is going to cut out the hump in the right side too. if you can understand what I'm talking about??? thanks scoti its all because of you! lol Last edited by bmfpeterson; 11-24-2009 at 02:57 PM.

12-04-2009, 01:22 AM	#43
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: a few pics got out the plasma and had some fun Attached Images

12-09-2009, 04:57 PM	#44
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: a few pics Ok so I cut out the wheel wells in the bed and dropped off the bed at the painters.the cab doors fenders are ready for paint. glad i cleaned up the firewall!

12-09-2009, 05:02 PM	#45
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: a few pics .. Attached Images

12-11-2009, 05:04 PM	#46
dan468 Registered User Join Date: Nov 2006 Location: Sun City, Arizona Posts: 430	Re: a few pics are you leaving the drip rails? __________________ 68 C-10 Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=414699



Register or Log In To remove these advertisements.

12-13-2009, 09:21 PM	#47
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: a few pics yep the drip rails are here to stay!

01-16-2010, 03:21 PM	#48
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: a few pics OK so I haven't had much time to do anything but work latley...... but plan on hittn hard when I get back from this next horse show next week... here are a couple pics I like to just sit at home and stare at while im drinkn beer..... Attached Images

01-16-2010, 05:04 PM	#49
dan468 Registered User Join Date: Nov 2006 Location: Sun City, Arizona Posts: 430	Re: a few pics looks good!!! __________________ 68 C-10 Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=414699

01-16-2010, 06:44 PM	#50
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,266	Re: a few pics looks great! hope to see it on the east valley roads soon! __________________ 1971 K5 CST Blazer 1972 short super c10 1965 Chevelle Malibu 283 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

Register or Log In To remove these advertisements.