Body Mount Bushings

[ronh72c10]

A while ago (August-September) somebody posted the summit racing part number for a complete suburban poly body mount bushing set. If somebody could post that part number, that'd be great.

Ron

[Hart_Rod]

Here you go:

[MrBinAz]

........so how hard/easy is it to replace those bushings with the cab on frame?
How do you do it?

[Hart_Rod]

Instructions from EST:

Spray all nuts to be removed with your favorite rust buster. Tighten all bolts to factory specs. Remove rear bumper. Remove top mounting brackets for radiator. Move radiator slightly to the side to remove bolt for position #1. Loosen all positions. Now remove the bolts on ONE SIDE ONLY ! When jacking the body, use a long enough 2x4 or 4x4 for maximum support. Never put the jack directly on body panels. Remove old body mounts, now install new Energy Suspension body mounts and associated parts using the below diagram as a guide. When disassembling, take special note of the quantity and positions of any shims that may have
been inserted for body alignment. NOTE: When installing Position #1, be sure to remove one of the OEM washers between the body and frame and place it under the frame as shown below.

Here another post that might help:

http://67-72chevytrucks.com/vboard/s...73#post1474173

[ronh72c10]

Cool, Thanks!