Carpet holddown question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cheyenne10 · 12-19-2006, 02:34 AM

It seems to me when I pulled rear rubber mat out of burb several yrs ago there were chrome hold down strips at front and rear of mat. I want to install new carpet kit now and not sure how to secure it and trim out. (can't find chrome strips I remember, probably too rust to keep at the time)

72GMCburban · 12-19-2006, 10:08 AM

get replacement strips from lmc or ebay they are about 13 to 16 bucks each. Chrome or S.S.

cheyenne10 · 12-19-2006, 10:58 AM

I think you are refering to the door sills. I have those, I need the strips about 4 ft long that hold down the rear carpet piece across the wood floor in the back of my burb. Blazers might have the same pieces.

**Hart_Rod** · 12-19-2006, 11:06 AM

I'm not sure if they make a replacement piece or not. You can make your own. Go to you local hardware store and get a 1/2 or 3/4" piece of flat aluminum or stainless. Just drill the holes where you want them. Look around the hardware store, you'd be suprised at the stuff you can find. All it takes is a little creativity.

Rob

bagged91 · 12-19-2006, 02:10 PM

Try this thread here for dimensions for the front carpet strip... I can't find pics of my rear carpet strip but it is stamped the same as the door sills are but as you said it's close to 4' long. It has a "dimple" in the center where the clamshell door latches would go...

http://www.67-72chevytrucks.com/vboa...d.php?t=167627

12-19-2006, 02:34 AM	#1
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,511	Carpet holddown question It seems to me when I pulled rear rubber mat out of burb several yrs ago there were chrome hold down strips at front and rear of mat. I want to install new carpet kit now and not sure how to secure it and trim out. (can't find chrome strips I remember, probably too rust to keep at the time) __________________ Bob

12-19-2006, 10:08 AM	#2
72GMCburban Registered User Join Date: Oct 2006 Location: Fort Worth Posts: 306	Re: Carpet holddown question get replacement strips from lmc or ebay they are about 13 to 16 bucks each. Chrome or S.S. __________________ --Mike http://rides.webshots.com/album/551997543JkYiXF

12-19-2006, 10:58 AM	#3
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,511	Re: Carpet holddown question I think you are refering to the door sills. I have those, I need the strips about 4 ft long that hold down the rear carpet piece across the wood floor in the back of my burb. Blazers might have the same pieces. __________________ Bob

12-19-2006, 11:06 AM	#4
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,827	Re: Carpet holddown question I'm not sure if they make a replacement piece or not. You can make your own. Go to you local hardware store and get a 1/2 or 3/4" piece of flat aluminum or stainless. Just drill the holes where you want them. Look around the hardware store, you'd be suprised at the stuff you can find. All it takes is a little creativity. Rob __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 12-19-2006 at 11:07 AM.

12-19-2006, 02:10 PM	#5
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Re: Carpet holddown question Try this thread here for dimensions for the front carpet strip... I can't find pics of my rear carpet strip but it is stamped the same as the door sills are but as you said it's close to 4' long. It has a "dimple" in the center where the clamshell door latches would go... http://www.67-72chevytrucks.com/vboa...d.php?t=167627 __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.