72 Cheyenne Build Thread - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**SactoJim** · 01-25-2007, 01:50 AM

Thought I would finally sit down and compile my build progress pics into one thread.

Bought this truck in 1990 and it was my driver for about 6 years. I'm the 2nd owner of the truck and one of the main reasons I bought it was because it had original paint on it still....though I wasn't thrilled with the color, It grew on me.

It is an original cheyenne, but the original owner ordered it with a "3 on the tree" which I promptly changed to a TH350 and a factory tilt column and then ordered a complete suspension kit fron So Low suspensions (stepped A arms, springs, shocks, and sway bars.

I parked it in 97 and it sat for a couple years before I began to tear it apart.

The first pics are of what I started with (front end off) and restoring the chassis. I have only a couple pics of the truck all together when I was driving it, but they are not in a digital format.

**SactoJim** · 01-25-2007, 01:52 AM

Here's some more chassis pics.

**SactoJim** · 01-25-2007, 02:04 AM

The next pics are of the motor.

I really wanted to go with a late model fuel injection changover (I drool over you guys that are doing that), but a came across a great deal on the blower and aluminum heads from a friend that had bailed on a project (brand new). and then did some trade out work with a friend of mine that builds motors.

The motor is the original 4 bolt block (040 over) with a Eagle forged stroker crank and H beam rods. Edelbrock RPM heads, scorpion 1.5 roller rockers, and an Isky custom grind blower cam. Pistons are forged SRP's. Moroso oil pan with a crank scraper and windage tray.

**SactoJim** · 01-25-2007, 02:09 AM

More engine pics.

The front drive is from Concept One. I had them make me a new bottom pulley for the blower. Good guys to work with and I recommend if your looking for a little less expension setup than many of the billet ones.

I painted my alt and air compressor cast grey and clear coated it to offset having too much shiney stuff.

**SactoJim** · 01-25-2007, 02:12 AM

The next pics are of the cab.

I am only going with the factory lower moldings so I filled all the upper molding mount holes. Also relocated the tank to the rear and filled cab filler hole.

**SactoJim** · 01-25-2007, 02:15 AM

The next pics are of the fuel lid that I grafted into the bed. Found it off an old olds at the local pick & pull one day and also got the electric release that I will use as well.

**SactoJim** · 01-25-2007, 02:19 AM

The next pics are of the tailgate.

I ordered an aftermarket tailgate only because the inside of mine was so beat up. The new gate fit like crap so I decided to cut it up and just use the inside and graft it onto my gate. No pics of it finished but it turned out very nice.

**SactoJim** · 01-25-2007, 02:23 AM

The next pics are of the custom fuel cell that Fuelcellguy built for me. Someone pointed out to me that the front part of the step up may need to be vented which made sense, so I went to the local cycle shop and got a couple of those trick vents and installed them.....should work fine.

**SactoJim** · 01-25-2007, 02:27 AM

Misc pics.

The engine is now running and I can't seem to not go very long without having to crank it over and hear it sing!!

**SactoJim** · 01-25-2007, 02:32 AM

These are the latest pics.

The cab is on for good and just set the bed on as well after cutting and rubbing out both.

I'm having a helluva time figuring what wheels to put on this think....right now I'm thinking Billet Specialties Vintecs.

IT"S LOOKING LIKE A TRUCK AGAIN!!!!

outlawc · 01-25-2007, 03:22 AM

Absolutely stunning work!!!! That is going to be one of the cleanest trucks I have seen. And its blown too!!!! You just can beat that.

Wheels, Foose Nitrous Gray, 18's up front, 20's out back. Those would be perfect with the color blue you have.

CHYNSPR · 01-25-2007, 10:57 AM

Beautiful!

What is your rear disc package?

Zumo · 01-25-2007, 11:17 AM

I could look a build threads like this all day.

**Hart_Rod** · 01-25-2007, 12:32 PM

Quote:

Originally Posted by SactoJim

Here's some more chassis pics.

Project looks great! Interested in the rear disc brake kit also. Where did the rotors come from? Thanks,

**SactoJim** · 01-25-2007, 12:55 PM

Looks like I was running on only 7 cylinders last night and posted this in the wrong place.....oh well.

The brakes are from Speedway. If I remember correctly (been awhile) I paid $399 for the kit. Came with everything...weld on brackets, caddy calipers, rotors and hats. Calipers were converted to std. instead of metric (brake line attachment). Also, the hats center opening had to be enlarged a little to fit the hub.

Haven't had a chance yet to see how they work.

It's been a few years since I did it and it seems there are more options for rear discs now.

weasel29gm · 01-25-2007, 02:12 PM

Wow!!!!!!!! What a change from the yellow!!! Super job

n2billet · 01-25-2007, 08:06 PM

Very nice work, truck is drop dead gorgeous.....You can't go wrong with Vintecs!
or course this is coming from a guy that's had four sets and just ordered another for his Rambler

kenm78 · 01-25-2007, 08:12 PM

Awsome truck super nice work.

CG · 01-25-2007, 10:34 PM

I like the vintage 200S wheels you have on there now...I wouldnt mind having a set of those lying around for a future project.

Oh, and your truck looks superb.

GREASEMONKEY72 · 01-25-2007, 10:37 PM

ive never liked the color blue more in my life than i do now..haha..what color blue is that anyway??? and thats a beautiful truck man i love it, nice work, how HP is that thing making?

texascowboy593 · 01-25-2007, 10:38 PM

Sweet!

lytemup454 · 01-25-2007, 10:47 PM

looks sweet! i like the gas door! any idea how hp much the motor will make?

**SactoJim** · 01-26-2007, 01:34 AM

Thanks alot guys for the compliments. Seems this truck is taking a lot longer then I ever imagined and I tend to have good stretches of progress and longer stretches of no progress, but now I'm at the point where I'm seeing significant visual changes and the sound of the thing running which substantially adds to the motivation!!

N2Billet - A compliment from you is gold when I look at your red 68....makes me wanna sell my 72 front end and convert!! Could I see some pics of your vehicles with the Vintec's? There's a big part me that is struggling with putting a cast center type wheel on this thing...WHAT TO DO!

CG - I love the 200S's that I have. but just want a bigger wheel/tire combo. Gonna sell em once I get the truck road worthy and after a few good burn outs with the old rubber.

GreaseMonkey72 - The color is 99-00 Corvette Bright Blue or I've heard it referred to as Nassau Blue.

...as far as horsepower goes, I've seen a few tests in some of the mags that resulted in about 470 hp on a goodwrench small block 350 with aluminum heads and a mild cam. I have a few more cubes (388) and a little bigger lower pulley and should see about 6-7 lbs of boost, though the charge will be a little warmer because this baby blower has to spin so fast. I'm guessing anywhere from 500-550 hp, but the best part will be the massive amount of low end torque the roots style blowers are famous for. I just hope the 700r4 stays together!

**JDL** · 01-26-2007, 11:48 AM

That is going to be a nice truck.

Brighton 72 · 01-26-2007, 03:08 PM

awesome truck man!!!!

good job on the work!

01-25-2007, 01:50 AM	#1
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	72 Cheyenne Build Thread Thought I would finally sit down and compile my build progress pics into one thread. Bought this truck in 1990 and it was my driver for about 6 years. I'm the 2nd owner of the truck and one of the main reasons I bought it was because it had original paint on it still....though I wasn't thrilled with the color, It grew on me. It is an original cheyenne, but the original owner ordered it with a "3 on the tree" which I promptly changed to a TH350 and a factory tilt column and then ordered a complete suspension kit fron So Low suspensions (stepped A arms, springs, shocks, and sway bars. I parked it in 97 and it sat for a couple years before I began to tear it apart. The first pics are of what I started with (front end off) and restoring the chassis. I have only a couple pics of the truck all together when I was driving it, but they are not in a digital format. Attached Images __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

01-25-2007, 01:52 AM	#2
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: 72 Cheyenne Build Thread Here's some more chassis pics. Attached Images __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

01-25-2007, 02:04 AM	#3
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: 72 Cheyenne Build Thread The next pics are of the motor. I really wanted to go with a late model fuel injection changover (I drool over you guys that are doing that), but a came across a great deal on the blower and aluminum heads from a friend that had bailed on a project (brand new). and then did some trade out work with a friend of mine that builds motors. The motor is the original 4 bolt block (040 over) with a Eagle forged stroker crank and H beam rods. Edelbrock RPM heads, scorpion 1.5 roller rockers, and an Isky custom grind blower cam. Pistons are forged SRP's. Moroso oil pan with a crank scraper and windage tray. Attached Images __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

01-25-2007, 02:09 AM	#4
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: 72 Cheyenne Build Thread More engine pics. The front drive is from Concept One. I had them make me a new bottom pulley for the blower. Good guys to work with and I recommend if your looking for a little less expension setup than many of the billet ones. I painted my alt and air compressor cast grey and clear coated it to offset having too much shiney stuff. Attached Images __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

01-25-2007, 02:12 AM	#5
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: 72 Cheyenne Build Thread The next pics are of the cab. I am only going with the factory lower moldings so I filled all the upper molding mount holes. Also relocated the tank to the rear and filled cab filler hole. Attached Images __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

01-25-2007, 02:15 AM	#6
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: 72 Cheyenne Build Thread The next pics are of the fuel lid that I grafted into the bed. Found it off an old olds at the local pick & pull one day and also got the electric release that I will use as well. Attached Images __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

01-25-2007, 02:19 AM	#7
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: 72 Cheyenne Build Thread The next pics are of the tailgate. I ordered an aftermarket tailgate only because the inside of mine was so beat up. The new gate fit like crap so I decided to cut it up and just use the inside and graft it onto my gate. No pics of it finished but it turned out very nice. Attached Images __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

01-25-2007, 02:23 AM	#8
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: 72 Cheyenne Build Thread The next pics are of the custom fuel cell that Fuelcellguy built for me. Someone pointed out to me that the front part of the step up may need to be vented which made sense, so I went to the local cycle shop and got a couple of those trick vents and installed them.....should work fine. Attached Images __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

01-25-2007, 02:27 AM	#9
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: 72 Cheyenne Build Thread Misc pics. The engine is now running and I can't seem to not go very long without having to crank it over and hear it sing!! Attached Images __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

01-25-2007, 02:32 AM	#10
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: 72 Cheyenne Build Thread These are the latest pics. The cab is on for good and just set the bed on as well after cutting and rubbing out both. I'm having a helluva time figuring what wheels to put on this think....right now I'm thinking Billet Specialties Vintecs. IT"S LOOKING LIKE A TRUCK AGAIN!!!! Attached Images __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

01-25-2007, 03:22 AM	#11
outlawc Registered User Join Date: Oct 2006 Location: Louisiana Posts: 211	Re: 72 Cheyenne Build Thread Absolutely stunning work!!!! That is going to be one of the cleanest trucks I have seen. And its blown too!!!! You just can beat that. Wheels, Foose Nitrous Gray, 18's up front, 20's out back. Those would be perfect with the color blue you have. Last edited by outlawc; 01-25-2007 at 03:26 AM.

01-25-2007, 10:57 AM	#12
CHYNSPR Registered User Join Date: Jan 2006 Location: Grande Prairie, Alberta Posts: 202	Re: 72 Cheyenne Build Thread Beautiful! What is your rear disc package?

01-25-2007, 11:17 AM	#13
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Re: 72 Cheyenne Build Thread I could look a build threads like this all day. __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

01-25-2007, 12:55 PM	#15
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: 72 Cheyenne Build Thread Looks like I was running on only 7 cylinders last night and posted this in the wrong place.....oh well. The brakes are from Speedway. If I remember correctly (been awhile) I paid $399 for the kit. Came with everything...weld on brackets, caddy calipers, rotors and hats. Calipers were converted to std. instead of metric (brake line attachment). Also, the hats center opening had to be enlarged a little to fit the hub. Haven't had a chance yet to see how they work. It's been a few years since I did it and it seems there are more options for rear discs now. __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

01-25-2007, 02:12 PM	#16
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,091	Re: 72 Cheyenne Build Thread Wow!!!!!!!! What a change from the yellow!!! Super job __________________ 69 C-10, OWNED 35YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......



Register or Log In To remove these advertisements.

01-25-2007, 08:06 PM	#17
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: 72 Cheyenne Build Thread Very nice work, truck is drop dead gorgeous.....You can't go wrong with Vintecs! or course this is coming from a guy that's had four sets and just ordered another for his Rambler Last edited by n2billet; 08-28-2009 at 05:56 AM.

01-25-2007, 08:12 PM	#18
kenm78 Broken Down Join Date: Dec 2006 Location: Choctaw, Oklahoma Posts: 1,267	Re: 72 Cheyenne Build Thread Awsome truck super nice work. __________________ kenm78 1982 Chevy 4X4 Project truck “It’s better to keep your mouth shut and let people wonder about your ignorance, than open your mouth and reveal all doubt”

01-25-2007, 10:34 PM	#19
CG BlahBlahBlah Join Date: Feb 2002 Location: Monroe, Wa. Posts: 19,779	Re: 72 Cheyenne Build Thread I like the vintage 200S wheels you have on there now...I wouldnt mind having a set of those lying around for a future project. Oh, and your truck looks superb.

01-25-2007, 10:37 PM	#20
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: 72 Cheyenne Build Thread ive never liked the color blue more in my life than i do now..haha..what color blue is that anyway??? and thats a beautiful truck man i love it, nice work, how HP is that thing making? __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

01-25-2007, 10:38 PM	#21
texascowboy593 Registered User Join Date: Dec 2004 Location: Southeast Tx Posts: 1,302	Re: 72 Cheyenne Build Thread Sweet! __________________ "The rays of light thru the Shiner Bock bottle make me wanna turn the key and put down the throttle...and get lost down 35" - Jason Boland www.YouTube.com/user/593Films - Watch My Videos! 1977 Silverado K10 2014 Dodge Durango (Wife-mobile) 2008 Dodge Ram Lone Star Edition (Daily driver)

01-25-2007, 10:47 PM	#22
lytemup454 Registered User Join Date: Dec 2006 Location: Pueblo West Posts: 264	Re: 72 Cheyenne Build Thread looks sweet! i like the gas door! any idea how hp much the motor will make?

01-26-2007, 01:34 AM	#23
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: 72 Cheyenne Build Thread Thanks alot guys for the compliments. Seems this truck is taking a lot longer then I ever imagined and I tend to have good stretches of progress and longer stretches of no progress, but now I'm at the point where I'm seeing significant visual changes and the sound of the thing running which substantially adds to the motivation!! N2Billet - A compliment from you is gold when I look at your red 68....makes me wanna sell my 72 front end and convert!! Could I see some pics of your vehicles with the Vintec's? There's a big part me that is struggling with putting a cast center type wheel on this thing...WHAT TO DO! CG - I love the 200S's that I have. but just want a bigger wheel/tire combo. Gonna sell em once I get the truck road worthy and after a few good burn outs with the old rubber. GreaseMonkey72 - The color is 99-00 Corvette Bright Blue or I've heard it referred to as Nassau Blue. ...as far as horsepower goes, I've seen a few tests in some of the mags that resulted in about 470 hp on a goodwrench small block 350 with aluminum heads and a mild cam. I have a few more cubes (388) and a little bigger lower pulley and should see about 6-7 lbs of boost, though the charge will be a little warmer because this baby blower has to spin so fast. I'm guessing anywhere from 500-550 hp, but the best part will be the massive amount of low end torque the roots style blowers are famous for. I just hope the 700r4 stays together! __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread Last edited by SactoJim; 01-26-2007 at 01:35 AM.

01-26-2007, 11:48 AM	#24
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,838	Re: 72 Cheyenne Build Thread That is going to be a nice truck. __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

01-26-2007, 03:08 PM	#25
Brighton 72 Registered User Join Date: Jan 2007 Location: Brighton, Colorado Posts: 8	Re: 72 Cheyenne Build Thread awesome truck man!!!! good job on the work!

Register or Log In To remove these advertisements.