The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-02-2015, 08:20 PM   #1
scotts72
Registered User
 
scotts72's Avatar
 
Join Date: Jun 2014
Location: Grand Prairie,Texas
Posts: 49
Led lights

Wanting to see if anyone has run into this, I changed everything to leds on my 68 SB from LMC including a LED flasher. All the lights turn on and hazards flash but the turn signals do not so wanted to ask the experts and see what I am missing.
scotts72 is offline   Reply With Quote
Old 11-02-2015, 08:41 PM   #2
flashed
Post Whore
 
Join Date: Oct 2009
Location: canton ga
Posts: 10,041
Re: Led lights

Your new flasher could be bad or it could be in the wrong socket .
flashed is offline   Reply With Quote
Old 11-02-2015, 09:38 PM   #3
Hillbilly Rod
Registered User
 
Join Date: Jan 2013
Location: South Central, Mo.
Posts: 2
Re: Led lights

I am not an expert, but did you install only one LED flasher. I think you would need one for both the Hazards and Signals?
Hillbilly Rod is offline   Reply With Quote
Old 11-02-2015, 10:44 PM   #4
bad68nomad
Registered User
 
bad68nomad's Avatar
 
Join Date: Jul 2015
Location: Springfield MO
Posts: 27
Re: Led lights

I have led's in my 66. I had the same problem. Led's don't pull enough amps to make the flasher work. You can install resistors in line to the turn signal bulbs. Or I installed a hidden standard socket and bulb to make the flasher work.
__________________
63 GMC long stepside
66 Chevy short fleetside
71 Chevy Longhorn
68 Chevelle Nomad wagon
bad68nomad is offline   Reply With Quote
Old 11-04-2015, 01:36 AM   #5
67 Burb
Registered User
 
67 Burb's Avatar
 
Join Date: Dec 2011
Location: Brandon, Manitoba, Canada
Posts: 402
Re: Led lights

Quote:
Originally Posted by bad68nomad View Post
I have led's in my 66. I had the same problem. Led's don't pull enough amps to make the flasher work. You can install resistors in line to the turn signal bulbs. Or I installed a hidden standard socket and bulb to make the flasher work.
When you can use the correct LED flasher that works, why go to all the trouble to install resistors or hidden standard bulbs. I should mention that the flashers that I use have to be grounded.
__________________
Bob

1967 2wd Burb, 350/TH350, 3.73 posi
67 Burb is offline   Reply With Quote
Old 11-04-2015, 02:33 AM   #6
leftybass209
Registered User
 
leftybass209's Avatar
 
Join Date: Feb 2011
Location: Modesto, CA
Posts: 2,066
Re: Led lights

Quote:
Originally Posted by 67 Burb View Post
When you can use the correct LED flasher that works, why go to all the trouble to install resistors or hidden standard bulbs. I should mention that the flashers that I use have to be grounded.
The issue I see with installing resistors or alternate lights to induce a load in the system, is you have to know where you are installing them. If you install a resistor into the series portion of a series-parallel circuit and it goes bad, you lose some or all of the lights depending on where the load is located.

If it were installed in a parallel leg it would just take out whatever lights are on that leg.

Using the appropriate flasher, you bypass adding extra, unnecessary resistance (which adds heat, though, not really an issue with a low-current draw like LED's).
leftybass209 is offline   Reply With Quote
Old 11-04-2015, 01:25 AM   #7
67 Burb
Registered User
 
67 Burb's Avatar
 
Join Date: Dec 2011
Location: Brandon, Manitoba, Canada
Posts: 402
Re: Led lights

Quote:
Originally Posted by Hillbilly Rod View Post
I am not an expert, but did you install only one LED flasher. I think you would need one for both the Hazards and Signals?
Yes. You have to have one for both the Hazards and Signals.

Here's the one I found that works best.
Attached Images
 
__________________
Bob

1967 2wd Burb, 350/TH350, 3.73 posi
67 Burb is offline   Reply With Quote
Old 11-12-2015, 11:00 PM   #8
88Ironduke
Registered User
 
Join Date: Jul 2010
Location: Willingboro, NJ
Posts: 457
Re: Led lights

From a diagnostic point I would say one has to wonder what is different between the hazard and turn signal circuit. If the flasher works and the relevant light assemblies work when commanded but none of the components work together when the signal system becomes part of the equation I would start looking there. I'm bored at work and have a new task. Thanks.

Paul
__________________
Retired USAF - No rockets, no mortars, no bad guys shooting...No stress!!!

My Build Thread: Project 72' Green
http://67-72chevytrucks.com/vboard/s...d.php?t=587932
88Ironduke is offline   Reply With Quote
Old 11-13-2015, 12:52 AM   #9
67 Burb
Registered User
 
67 Burb's Avatar
 
Join Date: Dec 2011
Location: Brandon, Manitoba, Canada
Posts: 402
Re: Led lights

A couple years back, I bought another flasher like the two that were in my Burb to have as a spare. I tried it out just so I'd know it was OK. It didn't work. I returned it and got my money back. After doing some research, I realized that it had come with a polarity-change adapter stuck onto it. If I had pulled that adapter off, it would have worked.

If anyone gets one of these flashers with this adapter stuck on the prongs, pull it off before using it in a NEG.-ground vehicle.
__________________
Bob

1967 2wd Burb, 350/TH350, 3.73 posi
67 Burb is offline   Reply With Quote
Old 11-13-2015, 09:07 AM   #10
scotts72
Registered User
 
scotts72's Avatar
 
Join Date: Jun 2014
Location: Grand Prairie,Texas
Posts: 49
Re: Led lights

good info I will check today, I am also going to check and see if everything has a good ground.
scotts72 is offline   Reply With Quote
Old 11-13-2015, 02:34 PM   #11
67 Burb
Registered User
 
67 Burb's Avatar
 
Join Date: Dec 2011
Location: Brandon, Manitoba, Canada
Posts: 402
Re: Led lights

If both flashers worked the hazard 4-ways, then they will both be negative ground. There's gotta be something else going on here.

And, grounding the flashers is essential.
__________________
Bob

1967 2wd Burb, 350/TH350, 3.73 posi
67 Burb is offline   Reply With Quote
Old 12-21-2016, 09:38 AM   #12
bigK76
Registered User
 
bigK76's Avatar
 
Join Date: Sep 2014
Location: Copperas Cove, TX
Posts: 11
Re: Led lights

just read all the posts and I am in the process of installing all LED's in my 69 C10 and want to know where I can get the Flashers from I looked on Ebay but they don't tell me if they will work on my truck. Can any of you help or have the link for me the 2 flashers.
__________________
1969 C10 long wheelbase stepside.
bigK76 is offline   Reply With Quote
Old 12-21-2016, 10:42 AM   #13
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 15,837
Thumbs up Re: Led lights

Quote:
Originally Posted by bigK76 View Post
just read all the posts and I am in the process of installing all LED's in my 69 C10 and want to know where I can get the Flashers from I looked on Ebay but they don't tell me if they will work on my truck. Can any of you help or have the link for me the 2 flashers.
Here you go.
Just type in LED flasher in google and it will pull 1000's of them up.


https://www.amazon.com/CEC-Industrie.../dp/B00JXLHE8S


I have done my whole truck in LED's. If the flashers don't fix it then you have wiring issues. As stated it's polarity senitive. If you have one wire that is swapped it will cause the issue you are having.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 12-21-2016, 11:58 AM   #14
bigK76
Registered User
 
bigK76's Avatar
 
Join Date: Sep 2014
Location: Copperas Cove, TX
Posts: 11
Re: Led lights

Ok thanks mine are all factory wires none have been messed with so hopefully everything works right. mine is a 2 prong and I found a EF32rl on ebay and purchased 2 one for turn signals and one for Hazards. I have a Heavy Duty EF32 electronic in it right now but someone told me that it would not work so I ordered this one http://www.ebay.com/itm/131836856669 which is suppose to be the correct one for my truck.
__________________
1969 C10 long wheelbase stepside.

Last edited by bigK76; 12-21-2016 at 12:10 PM. Reason: added part that was ordered
bigK76 is offline   Reply With Quote
Old 12-21-2016, 12:18 PM   #15
bigK76
Registered User
 
bigK76's Avatar
 
Join Date: Sep 2014
Location: Copperas Cove, TX
Posts: 11
Re: Led lights

[URL="http://www.memotronics.com/2-prong-electronic-led-compatible-turn-signal-flasher-relay-ef32rl-round-25-amp/"] maybe this one will load
__________________
1969 C10 long wheelbase stepside.
bigK76 is offline   Reply With Quote
Old 01-08-2017, 05:57 PM   #16
bigK76
Registered User
 
bigK76's Avatar
 
Join Date: Sep 2014
Location: Copperas Cove, TX
Posts: 11
Re: Led lights

I have a similar problem I installed my front and rear LED lights and flashers. When I have the head lights off the brake and turn signals work and are bright. But when I turn the headlights or marker lights on they don't work the turn signals work but the tail lights and front marker lights don't come on. Any help?
__________________
1969 C10 long wheelbase stepside.
bigK76 is offline   Reply With Quote
Old 01-08-2017, 10:32 PM   #17
dmjlambert
Senior Member
 
dmjlambert's Avatar
 
Join Date: Apr 2016
Location: Cypress, TX
Posts: 620
Re: Led lights

Remove the front marker lights and see if everything else works ok.
dmjlambert is offline   Reply With Quote
Old 01-08-2017, 11:27 PM   #18
bigK76
Registered User
 
bigK76's Avatar
 
Join Date: Sep 2014
Location: Copperas Cove, TX
Posts: 11
Re: Led lights

I found the problem the LED tail lights I had were not the proper led I need a BAY15D and I had bought a BA15D. Problem is fixed now.
__________________
1969 C10 long wheelbase stepside.
bigK76 is offline   Reply With Quote
Old 01-09-2017, 12:06 PM   #19
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 16,660
Re: Led lights

Quote:
Originally Posted by bigK76 View Post
I found the problem the LED tail lights I had were not the proper led I need a BAY15D and I had bought a BA15D. Problem is fixed now.
What's the difference in the two?
__________________
Rob - http://instagram.com/hart_rod
As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17

FOR SALE: DBW pedal bracket, Pedal adapter for LS trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=651123
FOR SALE: ChubTubz, Rear tubs for slammed trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=675754
FOR SALE: Hood Brackets, Bolt in hood brackets! http://67-72chevytrucks.com/vboard/s...d.php?t=679945


1969 SuperBurb - 5.3/Magnacharger..http://67-72chevytrucks.com/vboard/s...d.php?t=200387
1968 Farm truck: LS3/6L80/TVS1900: http://67-72chevytrucks.com/vboard/s...d.php?t=358692
1968 SWB - SHIFTED: PB Xtreme DM/LS1/Dakota Digital/AccuAir/Vintage Air/...http://67-72chevytrucks.com/vboard/s...d.php?t=551258
1948 5 Window Chevy http://67-72chevytrucks.com/vboard/s...=122164&page=3
FAQ: http://67-72chevytrucks.com/vboard/f...play.php?f=220
Hart_Rod is offline   Reply With Quote
Old 01-25-2017, 08:38 PM   #20
tdangle
Senior Member
 
tdangle's Avatar
 
Join Date: Mar 2005
Location: Jurupa Valley, Ca
Posts: 273
Re: Led lights

This is the difference:

https://www.bulbamerica.com/pages/wh...ay15d-base1157

Gotta Love Google
__________________
Terry

1970 C20 Custom Camper, 350/TH350 with Dana 60 4.11, AC, side tool box, wood bed floor. Has been in the family since new
tdangle is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:49 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com