C-notch step by step. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rokcrln · 04-09-2006, 03:41 PM

SCOTI~ You are right you should always double check this before cutting. The only reason I did not add that to the post is because I checked three frames in my shop and all of thenm were right at 7.5" from rear of oval (chassie dimention point) to CL of axel tube. But you never know if someone is in a hurry to go home for the day he may rush the jig prosses when building your C notch's and get it off a bit. Good call..

Kevin
LFD Inc.

04-09-2006, 03:41 PM	#4
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: C-notch step by step. SCOTI~ You are right you should always double check this before cutting. The only reason I did not add that to the post is because I checked three frames in my shop and all of thenm were right at 7.5" from rear of oval (chassie dimention point) to CL of axel tube. But you never know if someone is in a hurry to go home for the day he may rush the jig prosses when building your C notch's and get it off a bit. Good call.. Kevin LFD Inc.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.