DBW Gas Pedal Adapter bracket - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Clyde65** · 08-08-2017, 08:21 PM

I don't really but I have found one on line, hope this helps.

**Hart_Rod** · 08-09-2017, 08:34 AM

Quote:

Originally Posted by Clyde65

I don't really but I have found one on line, hope this helps.

Clyde, that pedal will work with my bracket (you may have to redrill the pedal mounting holes though), but I'm not sure what you will have to do to make my bracket work in your truck.

**Clyde65** · 08-09-2017, 10:01 AM

Should the floor be similar if not the same between the 63-70 at least?
Either way, can I get one without mounting holes drilled?

I'll be a guinea pig, what the heck!

**Hart_Rod** · 08-09-2017, 10:08 AM

Quote:

Originally Posted by Clyde65

Should the floor be similar if not the same between the 63-70 at least?
Either way, can I get one without mounting holes drilled?

I'll be a guinea pig, what the heck!

I would think that the floors would be similar. Only the bottom pedal mounting hole is predrilled. Let me know.

Rob

**Clyde65** · 08-09-2017, 11:00 AM

Ok, I'm going to order then. Thanks Rob.

Payment sent

**Hart_Rod** · 08-09-2017, 11:13 AM

Quote:

Originally Posted by Clyde65

Ok, I'm going to order then. Thanks Rob.

Payment sent

Thanks John. I need a shipping address also.

**Hart_Rod** · 08-09-2017, 11:18 AM

Quote:

Originally Posted by Clyde65

Ok, I'm going to order then. Thanks Rob.

Payment sent

Disregard my last, I found your address.

**Clyde65** · 08-09-2017, 11:21 AM

Awesome! Thanks again Rob!

**Hart_Rod** · 08-09-2017, 06:37 PM

Quote:

Originally Posted by Clyde65

Ok, I'm going to order then. Thanks Rob.

Payment sent

Your bracket shipped this afternoon. Thanks again!

**Clyde65** · 08-09-2017, 06:42 PM

Thanks Rob!!

Nodnarb76 · 02-07-2018, 11:58 AM

Any updates on this?
Did you use the bracket. What did you have to do to get it to work?
I have been looking at this for a while, and am trying to decide to either order one of these brackets, or cut and weld my current pedal.
Thanks.

**Clyde65** · 02-07-2018, 12:03 PM

It will work, I haven’t gotten there yet but I’m close...hopefully within the next week.

08-08-2017, 08:21 PM	#26
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,539	Re: DBW Gas Pedal Adapter bracket I don't really but I have found one on line, hope this helps. Attached Images __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 08-08-2017 at 09:07 PM.

08-09-2017, 10:01 AM	#28
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,539	Re: DBW Gas Pedal Adapter bracket Should the floor be similar if not the same between the 63-70 at least? Either way, can I get one without mounting holes drilled? I'll be a guinea pig, what the heck! __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

08-09-2017, 11:00 AM	#30
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,539	Re: DBW Gas Pedal Adapter bracket Ok, I'm going to order then. Thanks Rob. Payment sent __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

08-09-2017, 11:21 AM	#33
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,539	Re: DBW Gas Pedal Adapter bracket Awesome! Thanks again Rob! __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

08-09-2017, 06:42 PM	#35
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,539	Re: DBW Gas Pedal Adapter bracket Thanks Rob!! __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

02-07-2018, 11:58 AM	#36
Nodnarb76 Registered User Join Date: May 2013 Location: Mississippi Posts: 501	Re: DBW Gas Pedal Adapter bracket Any updates on this? Did you use the bracket. What did you have to do to get it to work? I have been looking at this for a while, and am trying to decide to either order one of these brackets, or cut and weld my current pedal. Thanks. __________________ 1987 R20 Suburban LQ4/4L80e swap: http://67-72chevytrucks.com/vboard/s...d.php?t=693824

02-07-2018, 12:03 PM	#37
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,539	Re: DBW Gas Pedal Adapter bracket It will work, I haven’t gotten there yet but I’m close...hopefully within the next week. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.