68 S/C update..... - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Palf70Step** · 05-01-2010, 09:17 PM

Rob truck looks great. Too me, nothing sets our trucks off like a set of ralleys.

tommyd241 · 05-01-2010, 09:18 PM

Actually, I should have heard from the powdercoater this week so I'll have to give them a ring on Monday. Only problem, the front tires I want (215/70 radial T/A's) are on backorder so it may take a while for them to be available.

**Hart_Rod** · 05-01-2010, 09:34 PM

Quote:

Originally Posted by Palf70Step

Rob truck looks great. Too me, nothing sets our trucks off like a set of ralleys.

Thanks Bill!

Quote:

Originally Posted by tommyd241

Actually, I should have heard from the powdercoater this week so I'll have to give them a ring on Monday. Only problem, the front tires I want (215/70 radial T/A's) are on backorder so it may take a while for them to be available.

Can't wait to see the wheels. I just put 225/70s (Firestone) on the front of this truck and really like the way the look.

tommyd241 · 05-01-2010, 09:39 PM

Yeah, the stance looks great. 15x8" fronts? What size rim/tire on the rear? What brand of tires you running.

**Hart_Rod** · 05-01-2010, 09:49 PM

Quote:

Originally Posted by tommyd241

Yeah, the stance looks great. 15x8" fronts? What size rim/tire on the rear? What brand of tires you running.

The front and rears are 8's. I've got a 315 60 15 Mickey Thompson drag radial on the rear......

.

tommyd241 · 05-01-2010, 09:54 PM

Wow nice! Is that about as wide as you can get on a 8" wheel? That's a fat tire!

**Hart_Rod** · 05-01-2010, 09:57 PM

Quote:

Originally Posted by tommyd241

Wow nice! Is that about as wide as you can get on a 8" wheel? That's a fat tire!

10's would be better, but they are hard to find....

tommyd241 · 05-01-2010, 10:06 PM

Well, I know it's only temporary but looks great. Sleeper style!

robmrtnbb5 · 05-11-2010, 12:14 PM

truck looks gr888 rob i had a 68 just like yours sold it bout 5 years ago wish i had'nt sold it was totly rust free but a guy made me a offer i could'nt turn down yours is lookin gr88888888

**Hart_Rod** · 05-11-2010, 10:58 PM

Quote:

Originally Posted by robmrtnbb5

truck looks gr888 rob i had a 68 just like yours sold it bout 5 years ago wish i had'nt sold it was totly rust free but a guy made me a offer i could'nt turn down yours is lookin gr88888888

Thanks! I don't have to worry about anyone offering any money for my junk,

.

RocketKing · 05-11-2010, 11:23 PM

Quote:

Originally Posted by Hart_Rod

10's would be better, but they are hard to find....

I found these 12" fat boys in the back of my truck when I got home. I knew the guy had some rims in the back but they were turned upside down and I did not find out they were rallyes till I cleaned out the truck.

Come to think about it, it is even stranger to have 5 lug 15x12 rallyes in the back of a 6 lug truck.

Sorry for the hijack

jgh64pkup · 05-11-2010, 11:24 PM

hey i need those

**Hart_Rod** · 05-12-2010, 12:08 AM

Quote:

Originally Posted by RocketKing

I found these 12" fat boys in the back of my truck when I got home. I knew the guy had some rims in the back but they were turned upside down and I did not find out they were rallyes till I cleaned out the truck.

Come to think about it, it is even stranger to have 5 lug 15x12 rallyes in the back of a 6 lug truck.

Sorry for the hijack

Do you know the backspacing? How much?

RocketKing · 05-12-2010, 12:12 AM

[QUOTE=Hart_Rod;3971447]Do you know the backspacing? How much?

Dunno, I will try to find the BS.

Voodoo Child · 05-12-2010, 09:48 AM

whatever you do, get the bonnevilles.

**Hart_Rod** · 05-20-2010, 12:58 PM

Quote:

Originally Posted by Voodoo Child

whatever you do, get the bonnevilles.

.

.

. I'm trying to finish up a few last details prior to hitting the Power Tour in Birmingham. I'm redoing my fuel system (Aeromotive components), replacing the rubber floormat and I picked these radiator covers up from Northwest Autofab. They look cool and I'm pretty sure they will help keep the engine cooler while moving by forcing more air through the radiator.

http://www.nwautofab.com/shop/xcart/...6&cat=3&page=1

**wancosc356** · 05-20-2010, 01:21 PM

Those covers are sweet! Truck's looking good man!

SCOTI · 05-20-2010, 02:52 PM

I've noticed those covers on their site but was curious of how well they actually fit on the support. They look fairly decent (hard to tell sometimes from internet pics....).

**Hart_Rod** · 05-20-2010, 04:43 PM

Quote:

Originally Posted by wancosc356

Those covers are sweet! Truck's looking good man!

Thanks Michael. House SC treating you?

Quote:

Originally Posted by SCOTI

I've noticed those covers on their site but was curious of how well they actually fit on the support. They look fairly decent (hard to tell sometimes from internet pics....).

They fit real well and they match the roll of the hood latch exactly . You have to make a small modification to the core support to use them as is (requires removal about 1 1/2" of the vertical rib on each side). I don't want to cut my core support so I've asked him to make me a set out of steel instead of aluminum and to weld a notch in to take in a account the vertical rib. I know it won't be quite as smooth, but I think it will look cool anyway. He also has the capability of punching the holes in it like my radiator cover, but I want to see how much cooling advantage will be gained with no holes. Clear as mud?

**wancosc356** · 05-21-2010, 10:23 AM

Quote:

Originally Posted by Hart_Rod

Thanks Michael. House SC treating you?

They fit real well and they match the roll of the hood latch exactly . You have to make a small modification to the core support to use them as is (requires removal about 1 1/2" of the vertical rib on each side). I don't want to cut my core support so I've asked him to make me a set out of steel instead of aluminum and to weld a notch in to take in a account the vertical rib. I know it won't be quite as smooth, but I think it will look cool anyway. He also has the capability of punching the holes in it like my radiator cover, but I want to see how much cooling advantage will be gained with no holes. Clear as mud?

Real good man. Still trying to get settled in and unpacked! Haha. I never realized how much stuff I had until I had to move it all.

What's the price difference to have those made in steel? And to add the holes? I was thinking the same thing when I saw them.

**SOON2BLAZE** · 05-21-2010, 08:26 PM

that is so bad azz! I think I like it more than your burb, and it's hot.

**Hart_Rod** · 06-01-2010, 01:35 AM

Quote:

Originally Posted by SOON2BLAZE

that is so bad azz! I think I like it more than your burb, and it's hot.

Thanks!

****

I haven't posted much BUT I have been making some progress on the fuel system. First I pulled all of the old stuff off (tank, pump, filter and regulator). Then I mounted the new Aeromotive 100 fuel pump and filters, wired the pump using a 40 amp relay and 10 gauge wire, re-routed the fuel supply line to the passenger side while updating it to a 10 AN line, added an 8 AN return line and installed a boost referenced fuel pressure regulator. This setup is supposed to be good up to a 1000 HP......

. I am also having a new fuel tank built that will be better able to support the demands of a Supercharger. Anyone interested in a "lightly" used FuelCell guy tank?

. I'm waiting on some lines and fittings, but should be able to finish it up by the end of the week.

trenz68 · 06-05-2010, 03:30 PM

nice

caviness · 06-06-2010, 10:50 PM

bad ass truck!!!!

**Hart_Rod** · 06-07-2010, 01:18 PM

Quote:

Originally Posted by trenz68

nice

Quote:

Originally Posted by caviness

bad ass truck!!!!

Thanks!!

****

GRANDPA GOT A NEW PAIR OF SHOES!!!!!!!

05-01-2010, 09:17 PM	#326
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,641	Re: 68 S/C update..... Rob truck looks great. Too me, nothing sets our trucks off like a set of ralleys. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-01-2010, 09:18 PM	#327
tommyd241 Registered User Join Date: May 2008 Location: 505 Posts: 447	Re: 68 S/C update..... Actually, I should have heard from the powdercoater this week so I'll have to give them a ring on Monday. Only problem, the front tires I want (215/70 radial T/A's) are on backorder so it may take a while for them to be available. __________________ '68 SWB Fleetside '98 K1500 Silverado

05-01-2010, 09:39 PM	#329
tommyd241 Registered User Join Date: May 2008 Location: 505 Posts: 447	Re: 68 S/C update..... Yeah, the stance looks great. 15x8" fronts? What size rim/tire on the rear? What brand of tires you running. __________________ '68 SWB Fleetside '98 K1500 Silverado

05-01-2010, 09:54 PM	#331
tommyd241 Registered User Join Date: May 2008 Location: 505 Posts: 447	Re: 68 S/C update..... Wow nice! Is that about as wide as you can get on a 8" wheel? That's a fat tire! __________________ '68 SWB Fleetside '98 K1500 Silverado

05-01-2010, 10:06 PM	#333
tommyd241 Registered User Join Date: May 2008 Location: 505 Posts: 447	Re: 68 S/C update..... Well, I know it's only temporary but looks great. Sleeper style! __________________ '68 SWB Fleetside '98 K1500 Silverado

05-11-2010, 12:14 PM	#334
robmrtnbb5 Registered User Join Date: Nov 2008 Location: archie mo Posts: 2,242	Re: 68 S/C update..... truck looks gr888 rob i had a 68 just like yours sold it bout 5 years ago wish i had'nt sold it was totly rust free but a guy made me a offer i could'nt turn down yours is lookin gr88888888 __________________ bondo bob http://s424.photobucket.com/albums/p...albumview=grid <<<link to my stuff and project 68 step side build

05-11-2010, 11:24 PM	#337
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: 68 S/C update..... hey i need those __________________ Gage 1967 C10 Shortbed Stepside

05-12-2010, 12:12 AM	#339
RocketKing Registered User Join Date: Dec 2008 Location: Berryville, AR Posts: 792	Re: 68 S/C update..... [QUOTE=Hart_Rod;3971447]Do you know the backspacing? How much? Dunno, I will try to find the BS.

05-12-2010, 09:48 AM	#340
Voodoo Child Registered User Join Date: Dec 2009 Location: Granbury, TX Posts: 52	Re: 68 S/C update..... whatever you do, get the bonnevilles. __________________ Garrett '71 Fleetside Chevy

05-20-2010, 01:21 PM	#342
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: 68 S/C update..... Those covers are sweet! Truck's looking good man! __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152 Last edited by wancosc356; 05-20-2010 at 01:21 PM.

05-20-2010, 02:52 PM	#343
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,910	Re: 68 S/C update..... I've noticed those covers on their site but was curious of how well they actually fit on the support. They look fairly decent (hard to tell sometimes from internet pics....). __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

05-21-2010, 08:26 PM	#346
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 905	Re: 68 S/C update..... that is so bad azz! I think I like it more than your burb, and it's hot.

06-05-2010, 03:30 PM	#348
trenz68 Damage Inc Join Date: Dec 2008 Location: Baytown Tx Posts: 336	Re: 68 S/C update..... nice __________________ 05 CC- magnacharged,LTs,Gt-2 cam,3.73s,tru-trac,tuned-sold 01 ECSB- caddy-clipped,22/24 intros,cammed,layin-frame 04 RCSB-joe gibbs clone,22in billets 68 stepper build http://67-72chevytrucks.com/vboard/s...d.php?t=332337

06-06-2010, 10:50 PM	#349
caviness Registered User Join Date: Oct 2009 Location: Liberty,NC Posts: 38	Re: 68 S/C update..... bad ass truck!!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.