LS factory cruise control hook up

[kwin]

Thanks you have answered many questions!

[Clyde65]

Mine is hooked up and working! now for a long road trip!

[ls1nova71]

Originally Posted by Clyde65

Mine is hooked up and working! now for a long road trip!

Right on!
Posted via Mobile Device

[Critter]

Aren't those levers pretty expensive. IIRC those are the ones LMC sells for $230. I have one that came out of a 1980 Suburban but it is pretty rough. Where did you get yours and where did you get the sheet of labels???

[ls1nova71]

Originally Posted by Critter

Aren't those levers pretty expensive. IIRC those are the ones LMC sells for $230. I have one that came out of a 1980 Suburban but it is pretty rough. Where did you get yours and where did you get the sheet of labels???

I don't know about LMC, I'll have to check my catalog when I get home. I think they are usually found in '81-82 trucks, but they're usually only a 3 wire switch so you have to change the switch inside of if with a 4 wire. Although I have seen a couple of them with the 4 wire switch already in them.

I had the labels made, if you want one, id sell you one for. $7 shipped.
Posted via Mobile Device

[Critter]

Originally Posted by ls1nova71

I don't know about LMC, I'll have to check my catalog when I get home. I think they are usually found in '81-82 trucks, but they're usually only a 3 wire switch so you have to change the switch inside of if with a 4 wire. Although I have seen a couple of them with the 4 wire switch already in them.

I had the labels made, if you want one, id sell you one for. $7 shipped.
Posted via Mobile Device

I found my lever and it is a 3 wire not to mention its in pretty bad shape. I'm going to hold off on getting a sticker from you until I can find a 4 wire setup or at least a nicer 3 wire to convert. I might even get a new one, who know.

[ls1nova71]

Originally Posted by mcmlxix

So I need the one with the hole for the screw....

What did these come out of again.... 3 or 4 wire doesn't matter...

They are usually found in "81 vans and '81-82 trucks.

Originally Posted by Critter

I found my lever and it is a 3 wire not to mention its in pretty bad shape. I'm going to hold off on getting a sticker from you until I can find a 4 wire setup or at least a nicer 3 wire to convert. I might even get a new one, who know.

How bad is it? I might be able to fix it, I've fixed some pretty nasty looking ones. Or if you get a new one and the old one isn't all that bad, I might be interested in it.

[Gunny Davis]

Hey guys my cruise lever has 4 wires at the connecter Red, Brown, Green, Yelow. Pretty sure it is from Van tilt column.
I need help making the conections to my '99 Silverado cruise module.
I have transplanted the '99 5.3 / 4l60e, fuse block, and instrument cluster.

Appreciate your help
http://67-72chevytrucks.com/vboard/a...1&d=1333917353
Just need help with figuring out wich wires go were.

'99 Crusie Module Connecter:
A Gry 397 On switch Output
B DkBlu 84 Set/Coast switch signal
C Gry/Blk 87 Resume/Accel switch signal
D Brn/Wht 379 Clutch pedal switch output
E Blk/Wht 451 Engine control module ground
F Brn 41 Fused Ignition3 Output
G LtBlu 1320 Fused stop lamp feed
H Not used
(no "I" position)
J LtBlu/Blk 396 Signal engage
K DkGrn/Wht 817 VSS

[Critter]

I will probably take you up on that, let me dig up my old lever and see how many wires it has and if it is usable. Thanks!

[chebyshortbox65]

so in order to run cruise with an on off toggle and a momentary switch i need to run a jumper wire with 12v from the on off switch when its on to the middle of the momentary switch ?

[code4]

Originally Posted by chebyshortbox65

so in order to run cruise with an on off toggle and a momentary switch i need to run a jumper wire with 12v from the on off switch when its on to the middle of the momentary switch ?

I have a toggle switch that provides 12+ to terminal A to turn the unit on/off.
I have a momentary push button that provides 12+ to terminal B when pushed to set cruise. If i hold the button in it will coast until i release the button. Terminal C i remove, everything else is the same as posted.

[chevydog66]

Would 1 of these type cruise levers work with 01 6.0 DBW and cruise module? http://www.ebay.com/itm/1971-72-CADI...5e7c01&vxp=mtr

It only has 3 wires, black, blue, and brown.

[ls1nova71]

Originally Posted by chevydog66

Would 1 of these type cruise levers work with 01 6.0 DBW and cruise module? http://www.ebay.com/itm/1971-72-CADI...5e7c01&vxp=mtr

It only has 3 wires, black, blue, and brown.

It might, but you would only be able to set it, you wouldn't have an on/off or accel/resume.
If you want one of the ones I have pictured I have a few I would sell.
Posted via Mobile Device

[chevydog66]

Originally Posted by ls1nova71

It might, but you would only be able to set it, you wouldn't have an on/off or accel/resume.
If you want one of the ones I have pictured I have a few I would sell.
Posted via Mobile Device

Ok. Thanks. I would be happy just pushing the button and the cruise would be set. I don't need the fancy on/off or accel/resume.

[ls1nova71]

I almost forgot about the pics, and I don't have alot of time right now, so I couldn't find the good pics, but here's one of them on my truck. I have the ribbed kind and the smooth kind, both these pics are the ribbed. The smooth are $45 shipped and the ribbed are $50 shipped.

[1965Impala]

Originally Posted by ls1nova71

I almost forgot about the pics, and I don't have alot of time right now, so I couldn't find the good pics, but here's one of them on my truck. I have the ribbed kind and the smooth kind, both these pics are the ribbed. The smooth are $45 shipped and the ribbed are $50 shipped.

LS1nova71, I would like to have one of the Cruise Control switches you offered in post #54. I will PM you. Thanks.

[Daaaanz67]

Are these compatible with ls dbw also are the ribbed one the period correct for the 67/72
Posted via Mobile Device

[ls1nova71]

Originally Posted by Daaaanz67

Are these compatible with ls dbw also are the ribbed one the period correct for the 67/72
Posted via Mobile Device

They work for the gen 3 engines, the gen4 are harder to get cruise to work on. Also... they're not period correct, they just look a little more correct, especially if you have a tilt since they match the tilt lever.
Posted via Mobile Device

[Daaaanz67]

My drive train came out of 06 Tahoe dbw will this work
Posted via Mobile Device

[ls1nova71]

Originally Posted by Daaaanz67

My drive train came out of 06 Tahoe dbw will this work
Posted via Mobile Device

Yes it will, the engine in my orange truck is an '06 as well.

[Daaaanz67]

I'll take one of your best ribbed one I'll pm you.
Posted via Mobile Device

[cjohnson6772]

Is there anyway to fish this down through the column without taking it all apart? Factory tilt. Also, any chance we can get a pic of where the wiring comes out of the lever?
Posted via Mobile Device

[mcmlxix]

Originally Posted by cjohnson6772

Is there anyway to fish this down through the column without taking it all apart? Factory tilt. Also, any chance we can get a pic of where the wiring comes out of the lever?
Posted via Mobile Device

The cable from the stalk is flat and should be able to fit... with a little finess...

[ls1nova71]

Originally Posted by cjohnson6772

Is there anyway to fish this down through the column without taking it all apart? Factory tilt. Also, any chance we can get a pic of where the wiring comes out of the lever?
Posted via Mobile Device

You would need to pull the turn signal switch out, well, not all the way out, but take the three screws out move the switch out of the way, put the column in the straight position, take the little wire cover that goes between the shift bowl and the dash off, then you can fish the wire down it fairly easily. The wires on the cruise switches are pretty rigid, so it's not all that hard.

Here's the pic of where the wires come out of the lever.

[Hart_Rod]

Great information! I've got two trucks I have to do this to....
Posted via Mobile Device