project INCREDIBLE HULK 6.2L with 6L80E - Page 15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dieselarmy13 · 03-15-2009, 06:47 PM

68 short step · 03-16-2009, 11:42 PM

bit more progress, i got the door fitting the best it could.....the gaps sucked (aftermarket door), expecially around the window frame.....it was too tight on the upper aft part of the window opening, then it tappered to about a 1/4" gap in the middle, and then went to about a 1/32" at the upper front.......what i had to do was cut the door at the front door piller, then remove 1/8" of material, pull the front frame back....that took care of the front piller gap....on the rest of the window frame i pushed the rear of the window frame forward, then shaves off about 1/16" to get the gaps good......

mike nutt · 03-17-2009, 05:36 AM

don ,
the truck is looking great . are you going to weld the seem across the back of the roof ? what's the color gonna be ? well , keep up the great work , can't wait to see it finished. i'm sure the owner

is gonna love it !!!!

68 short step · 03-29-2009, 08:29 PM

Quote:

Originally Posted by mike nutt

don ,
the truck is looking great . are you going to weld the seem across the back of the roof ? what's the color gonna be ? well , keep up the great work , can't wait to see it finished. i'm sure the owner

is gonna love it !!!!

ya we're gonna do a little somethin somethin to the rear roof seam.....

as for the color, its still to be determend....

68 short step · 03-29-2009, 08:38 PM

here is a bit of an update....
got the rear step notch installed, (the old c-notch wasnt doing it for us) so with the step notch we were able to lower it about 2" more..... here is some pics, the shocks will be added shortly, when the bridge goes in..... also keep in mind that the tires on there now (rear) are for rollers only, they are 31"....

68 short step · 03-29-2009, 08:39 PM

**Hart_Rod** · 03-29-2009, 09:50 PM

That's starting to look like a truck!!!!! When's the projected completion date?

68 short step · 05-03-2009, 07:05 PM

got a bit of an update.....
im back on the dash/center console....i got the side peices made......the center console is kinda challenging (because i wanted to make it out of 1 peice), so instead of making it out of 1 peice, its gonna be 4 peices welded together....here are the side peices, they have a rolled top (kinda see this in the pics), and also im gonna make a inner structure to support the weight of our electronics, arm rest, and just general wear and tear it'll receive.....
also here is the side profile of how the truck sits now with 30" tires rear and 27.5" tires on the front (both on 15" wheels).......

68 short step · 05-03-2009, 07:07 PM

**FRENCHBLUE72** · 05-03-2009, 07:16 PM

I take it the garage was getting too smalll...

killer71 · 05-03-2009, 07:31 PM

need more photos of the tool ben lol...thought it was goin in the kitchen?

68 short step · 05-03-2009, 07:58 PM

Quote:

Originally Posted by FRENCHBLUE72

I take it the garage was getting too smalll...

yelp, i had to make a move, when i started takeing up family members garage space

Quote:

Originally Posted by killer71

need more photos of the tool ben lol...thought it was goin in the kitchen?

ill have to get some....morgan said "nuh uhhhhh"

the specs are 72" wide 30" deep and 45" tall.....its a big-unnn

SCOTI · 05-03-2009, 08:53 PM

Hey..... Those bedsides look might familiar

.

kyull67 · 05-04-2009, 02:37 AM

That's some nice work!

my67chevytruck · 05-04-2009, 07:06 AM

looking good.

teezyboi817 · 05-06-2009, 06:57 PM

how much would that dash center console run me if u made me one similar to it

68 short step · 05-08-2009, 06:43 PM

Quote:

Originally Posted by teezyboi817

how much would that dash center console run me if u made me one similar to it

let me finish up with this one, and ill let ya know

nuke1 · 05-08-2009, 10:48 PM

I am so jealous of your ride height, mine will be 2 inches taller than i had hoped for, guess bags will come into play later, btw that console is just plain Sexy.

72 SHORTBED 7.0 · 05-10-2009, 09:57 AM

Quote:

Originally Posted by 68 short step

Need more room

68 short step · 05-10-2009, 10:37 AM

Quote:

Originally Posted by 72 SHORTBED 7.0

Need more room

i know...

Rokcrln · 05-10-2009, 10:46 AM

You will always need more room. We sold our old house to buy this one with a 1200 sq. ft shop, plenty of parking and a 2 story out building and now we are out of space. Luckily I am zoned commercial so I can put a second story on the shop for almost 2400 sq. ft. Not bad for being right down town. Next stop will be 5+ acres!

Truck is looking great by the way. I like the dash you have designed. I should have my Lazze English wheel real soon so I can start playing as well.

Kevin
LFD Inc.

68 short step · 05-10-2009, 10:47 AM

got the center console made....the front peices were the last peices to be made, so i made a cardboard templete, transfered it to metal, cut and fit, added a stiffner for some rigitity, then welded together. .....ill add some stiffners that connect the two sides, when the dash comes back out.... here are the pics (the 3rd one looks like some mid-evil deheading device)

68 short step · 05-10-2009, 10:50 AM

and the other side

68 short step · 05-10-2009, 10:53 AM

and it fitted in,

n2billet · 05-10-2009, 12:03 PM

Looks great! Are you going to make any provisions for carpet or leather to go under the console or are you going to bind the carpet at the edge?....sorry I'm in interior mode right now and it looks like the console fits nice and flush with the floor...

03-15-2009, 06:47 PM	#351
dieselarmy13 Phone's ringin Dude. Join Date: Mar 2007 Location: Colorado Springs Posts: 1,426	Re: project INCREDIBLE HULK 6.2L with 6L80E __________________ I pitty the fool with only two headlights!! 2003 SILVERADO SS--THE NEW GIRL 1972 GMC--THE OLD GIRL

03-16-2009, 11:42 PM	#352
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: project INCREDIBLE HULK 6.2L with 6L80E bit more progress, i got the door fitting the best it could.....the gaps sucked (aftermarket door), expecially around the window frame.....it was too tight on the upper aft part of the window opening, then it tappered to about a 1/4" gap in the middle, and then went to about a 1/32" at the upper front.......what i had to do was cut the door at the front door piller, then remove 1/8" of material, pull the front frame back....that took care of the front piller gap....on the rest of the window frame i pushed the rear of the window frame forward, then shaves off about 1/16" to get the gaps good...... Last edited by 68 short step; 03-16-2009 at 11:45 PM.

03-17-2009, 05:36 AM	#353
mike nutt 69fatmotor Join Date: Oct 2005 Location: bama Posts: 660	Re: project INCREDIBLE HULK 6.2L with 6L80E don , the truck is looking great . are you going to weld the seem across the back of the roof ? what's the color gonna be ? well , keep up the great work , can't wait to see it finished. i'm sure the owner is gonna love it !!!!

03-29-2009, 08:38 PM	#355
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: project INCREDIBLE HULK 6.2L with 6L80E here is a bit of an update.... got the rear step notch installed, (the old c-notch wasnt doing it for us) so with the step notch we were able to lower it about 2" more..... here is some pics, the shocks will be added shortly, when the bridge goes in..... also keep in mind that the tires on there now (rear) are for rollers only, they are 31".... Last edited by 68 short step; 03-29-2009 at 08:42 PM.

03-29-2009, 08:39 PM	#356
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: project INCREDIBLE HULK 6.2L with 6L80E

03-29-2009, 09:50 PM	#357
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,827	Re: project INCREDIBLE HULK 6.2L with 6L80E That's starting to look like a truck!!!!! When's the projected completion date? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

05-03-2009, 07:05 PM	#358
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: project INCREDIBLE HULK 6.2L with 6L80E got a bit of an update..... im back on the dash/center console....i got the side peices made......the center console is kinda challenging (because i wanted to make it out of 1 peice), so instead of making it out of 1 peice, its gonna be 4 peices welded together....here are the side peices, they have a rolled top (kinda see this in the pics), and also im gonna make a inner structure to support the weight of our electronics, arm rest, and just general wear and tear it'll receive..... also here is the side profile of how the truck sits now with 30" tires rear and 27.5" tires on the front (both on 15" wheels).......

05-03-2009, 07:07 PM	#359
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: project INCREDIBLE HULK 6.2L with 6L80E

05-03-2009, 07:16 PM	#360
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: project INCREDIBLE HULK 6.2L with 6L80E I take it the garage was getting too smalll... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-03-2009, 07:31 PM	#361
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: project INCREDIBLE HULK 6.2L with 6L80E need more photos of the tool ben lol...thought it was goin in the kitchen? __________________ R.I.P. Killer 71 10/26/07

05-03-2009, 08:53 PM	#363
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,910	Re: project INCREDIBLE HULK 6.2L with 6L80E Hey..... Those bedsides look might familiar . __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

05-04-2009, 02:37 AM	#364
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: project INCREDIBLE HULK 6.2L with 6L80E That's some nice work! __________________ The first '67 The current '67 '63 Biscayne

05-04-2009, 07:06 AM	#365
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: project INCREDIBLE HULK 6.2L with 6L80E looking good. __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

05-06-2009, 06:57 PM	#366
teezyboi817 Registered User Join Date: Dec 2008 Location: ft worth texas Posts: 150	Re: project INCREDIBLE HULK 6.2L with 6L80E how much would that dash center console run me if u made me one similar to it __________________ 1968 CHEVY C10 THE NEVER ENDING PROJECT

05-08-2009, 10:48 PM	#368
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: project INCREDIBLE HULK 6.2L with 6L80E I am so jealous of your ride height, mine will be 2 inches taller than i had hoped for, guess bags will come into play later, btw that console is just plain Sexy. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587



Register or Log In To remove these advertisements.

05-10-2009, 10:46 AM	#371
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: project INCREDIBLE HULK 6.2L with 6L80E You will always need more room. We sold our old house to buy this one with a 1200 sq. ft shop, plenty of parking and a 2 story out building and now we are out of space. Luckily I am zoned commercial so I can put a second story on the shop for almost 2400 sq. ft. Not bad for being right down town. Next stop will be 5+ acres! Truck is looking great by the way. I like the dash you have designed. I should have my Lazze English wheel real soon so I can start playing as well. Kevin LFD Inc.

05-10-2009, 10:47 AM	#372
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: project INCREDIBLE HULK 6.2L with 6L80E got the center console made....the front peices were the last peices to be made, so i made a cardboard templete, transfered it to metal, cut and fit, added a stiffner for some rigitity, then welded together. .....ill add some stiffners that connect the two sides, when the dash comes back out.... here are the pics (the 3rd one looks like some mid-evil deheading device)

05-10-2009, 10:50 AM	#373
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: project INCREDIBLE HULK 6.2L with 6L80E and the other side

05-10-2009, 10:53 AM	#374
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: project INCREDIBLE HULK 6.2L with 6L80E and it fitted in,

05-10-2009, 12:03 PM	#375
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: project INCREDIBLE HULK 6.2L with 6L80E Looks great! Are you going to make any provisions for carpet or leather to go under the console or are you going to bind the carpet at the edge?....sorry I'm in interior mode right now and it looks like the console fits nice and flush with the floor... __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

Register or Log In To remove these advertisements.