Pics of bagged W/O Z,ed or PB fronts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blazer2007 · 09-18-2014, 10:08 AM

I was wondering if there is a thread of bagged trucks or Blazers that don,t have any extra work done to the the front like pancakeing the crossmember or portbuilt or Z,ed frames,just simple bag jobs.I looked in the lowered section but not many people tell you if it is alterted.

PBFAB.COM · 09-18-2014, 10:34 AM

This has our Stage 1 Front kit. Airbag replaces the coil spring with an upper plate that bolts to the crossmember and a lower cup that rests in the spring pocket on the lower arm, and a shock relocation kit.

Rear is a Stage 2 Basic that has our two-piece bolt-in c-notch, an airbag that replaces the coil spring, a fully adjustable trac bar, and a shock relocation system.

blazer2007 · 09-18-2014, 10:38 AM

Quote:

Originally Posted by blazer2007

I was wondering if there is a thread of bagged trucks or Blazers that don,t have any extra work done to the the front like pancakeing the crossmember or portbuilt or Z,ed frames,just simple bag jobs.I looked in the lowered section but not many people tell you if it is alterted.

forgot to mention in the 73 and up era

PBFAB.COM · 09-18-2014, 10:45 AM

Quote:

Originally Posted by blazer2007

forgot to mention in the 73 and up era

Just imagine that it's a square body! LOL

I will have to see if I can dig up some pics of a 73-87.

Nate

Desert.Chevy · 09-18-2014, 11:23 AM

While you looking for pictures of 73-87, if you have pictures of 64-66 with this setup please post some. Thanks

PBFAB.COM · 09-18-2014, 12:04 PM

Quote:

Originally Posted by Desert.Chevy

While you looking for pictures of 73-87, if you have pictures of 64-66 with this setup please post some. Thanks

Ask and ye shall receive!

Stage 1 front and Stage 2 rear basic:

Desert.Chevy · 09-19-2014, 12:41 AM

Thank you for the picture.
Is this a Forum member, I would like to ask the rocker to floor measurement when aired out. Im low now and I think if I have read right if I do this I could be higher than my height now when aired out. Or if you know the answers, again thanks.

blazer2007 · 09-19-2014, 10:52 AM

Quote:

Originally Posted by PBFAB.COM

Ask and ye shall receive!

Stage 1 front and Stage 2 rear basic:

Hey ,I asked first. lol

PBFAB.COM · 09-19-2014, 11:28 AM

Quote:

Originally Posted by blazer2007

Hey ,I asked first. lol

Squarebody discrimination....

laid67c10 · 09-19-2014, 02:39 PM

This is mine bagged currently, but I just got the front porterbuilt extreme dropmember in so it will be installed soon as I get it back from powdercoat! The rear I'm unsure what I'm gonna do yet, PB dropmember or custom cause it will have 24x15's out back.

chakah · 09-29-2014, 10:57 PM

Quote:

Originally Posted by Desert.Chevy

Thank you for the picture.
Is this a Forum member, I would like to ask the rocker to floor measurement when aired out. Im low now and I think if I have read right if I do this I could be higher than my height now when aired out. Or if you know the answers, again thanks.

Yes, I am a member. Is this what you wanted? This is the very front of the bed where the cab ends and aired out. Bags is the way to go, very smooth. No regrets with PB products. Hope this helps.

c10seconds · 09-30-2014, 01:02 AM

Mild porterbuilt on bags with 22" & 24" wheels

mongoose · 09-30-2014, 02:10 AM

thats as low as you're gonna get without cutting things up.

laid67c10 · 09-30-2014, 07:31 AM

Quote:

Originally Posted by c10seconds

Mild porterbuilt on bags with 22" & 24" wheels

Nice truck!

hanly2 · 11-06-2014, 10:15 PM

Oh let me get in. PB with that 67-72 style truck how low is the cross member to the ground? Also with a bigger notch and the bags still in the stock spring location in the back how much lower will it go?

Tree-50 · 11-06-2014, 11:37 PM

Quote:

Originally Posted by hanly2

Oh let me get in. PB with that 67-72 style truck how low is the cross member to the ground? Also with a bigger notch and the bags still in the stock spring location in the back how much lower will it go?

I'm not sure but if it's close to or the equivalent of a Z then I'd assume its around 5 or 6". Based off people saying their bagged lca are 3" off and z'ing i believe is usually 1.5-3" raise?

hanly2 · 11-07-2014, 12:12 AM

Bagged or cupped? kinda lost me there?

**lolife99** · 11-07-2014, 12:37 AM

Quote:

Originally Posted by c10seconds

Mild porterbuilt on bags with 22" & 24" wheels

Love those wheels!

**Hart_Rod** · 11-08-2014, 09:01 PM

Quote:

Originally Posted by lolife99

love those wheels!

+1

09-18-2014, 10:08 AM	#1
blazer2007 Registered User Join Date: Jan 2007 Location: vernon b.c. Posts: 3,022	Pics of bagged W/O Z,ed or PB fronts I was wondering if there is a thread of bagged trucks or Blazers that don,t have any extra work done to the the front like pancakeing the crossmember or portbuilt or Z,ed frames,just simple bag jobs.I looked in the lowered section but not many people tell you if it is alterted.

09-18-2014, 10:34 AM	#2
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Pics of bagged W/O Z,ed or PB fronts This has our Stage 1 Front kit. Airbag replaces the coil spring with an upper plate that bolts to the crossmember and a lower cup that rests in the spring pocket on the lower arm, and a shock relocation kit. Rear is a Stage 2 Basic that has our two-piece bolt-in c-notch, an airbag that replaces the coil spring, a fully adjustable trac bar, and a shock relocation system. Attached Images __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

09-18-2014, 11:23 AM	#5
Desert.Chevy Registered User Join Date: Nov 2012 Location: Earth Posts: 337	Re: Pics of bagged W/O Z,ed or PB fronts While you looking for pictures of 73-87, if you have pictures of 64-66 with this setup please post some. Thanks

09-19-2014, 12:41 AM	#7
Desert.Chevy Registered User Join Date: Nov 2012 Location: Earth Posts: 337	Re: Pics of bagged W/O Z,ed or PB fronts Thank you for the picture. Is this a Forum member, I would like to ask the rocker to floor measurement when aired out. Im low now and I think if I have read right if I do this I could be higher than my height now when aired out. Or if you know the answers, again thanks.

09-19-2014, 02:39 PM	#10
laid67c10 Registered User Join Date: Apr 2005 Location: longview, TX Posts: 280	Re: Pics of bagged W/O Z,ed or PB fronts This is mine bagged currently, but I just got the front porterbuilt extreme dropmember in so it will be installed soon as I get it back from powdercoat! The rear I'm unsure what I'm gonna do yet, PB dropmember or custom cause it will have 24x15's out back. __________________ 49 Chevy - currently under construction being bagged and hunting for a LS drivetrain!!! 09 - Harley nighttrain on air ride!

09-30-2014, 01:02 AM	#12
c10seconds Registered User Join Date: Oct 2009 Location: gilbert,AZ Posts: 947	Re: Pics of bagged W/O Z,ed or PB fronts Mild porterbuilt on bags with 22" & 24" wheels Attached Images __________________ 1967 C10 SWB 6.8L/4L80

09-30-2014, 02:10 AM	#13
mongoose Registered User Join Date: Feb 2009 Location: slurrey, bc. Posts: 1,134	Re: Pics of bagged W/O Z,ed or PB fronts thats as low as you're gonna get without cutting things up. Attached Images __________________ -'73 c/10 - Low with Go - will be complete... probably never. -'90 2wd Blazer - well... soon enough anyways. -'84 SWB - the daily gas guzzler.

11-06-2014, 10:15 PM	#15
hanly2 Registered User Join Date: Mar 2014 Location: Gibbstown, NJ Posts: 176	Re: Pics of bagged W/O Z,ed or PB fronts Oh let me get in. PB with that 67-72 style truck how low is the cross member to the ground? Also with a bigger notch and the bags still in the stock spring location in the back how much lower will it go?

11-07-2014, 12:12 AM	#17
hanly2 Registered User Join Date: Mar 2014 Location: Gibbstown, NJ Posts: 176	Re: Pics of bagged W/O Z,ed or PB fronts Bagged or cupped? kinda lost me there?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.