Seperation forces sale... Everything must go... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bagged91 · 08-20-2005, 10:58 PM

I have a ton of stuff I need to get rid of. My fiance & I are parting ways & I need the $$ to get my own place.

Front clip for a 67/8 Chevy(drivers fender is an original 67, minor dings, no rot holes, pass fender is a new aftermarket 68). It comes with 2 hoods, rust & dent free grille, aluminum headlight trim & grill hoops, solid lower splash pan/grille brace & 2 hoodlatches and a straight core support that needs minor work under battery tray. I will not seperate. I need $300 for everything, picked up in Southern NJ.

I have 2 complete sets of 72' Burb rear cargo panels. One set is parchment, the other is metalic blue. $100/set + shipping. They are starting to come off the backerboard but are decent otherwise.

I have 2 middle row seats for a 67-72 burb. One with brackets for floor, other without. Both are parchment(one scroll, one custom cloth, both need recovering but have good foam). Sell them both for $100(must take both). Will not ship.

1976 454/T400(with bolt on yoke). Motor ran when pulled 2 years ago. Smoked very little. Ran cold & had good compression & oil pressure. T400 needs to be rebuilt. Need $750 for both.

1971 Burb' C10 project or parts truck. Med olive w/ dk olive custom cloth interior. Truck is fairly solid in the floors. Needs normal 1/4 panel work. Has 307(not running)/ 3spd. Missing brake booster & m/c and some interior pieces. Uncut dash. Need $1000 for it. Have original sales order for the truck too.

1972 C10 Cheyenne Super project or parts truck. Dark Olive/White with dk olive houndstooth bench. A/C cab with uncut dash. Was 350/T350. No motor but trans is there. Solid doors/bedfloor/coresupport. Cab has normal rocker & floor rust. Needs header fixed too. Truck is worth more in parts... $750 obo.

I will make a nice package deal to anyone who wants it... Say, $2250 for it all... I need this stuff to move quickly so make me an offer if you don't like the price...

Thanks... Joe

jay_shy · 08-20-2005, 11:05 PM

I would be interested in 68 eyebrow mouldings and hood mouldings also if you have hood letters. Maybe even chrome grill hoops. It all doesn't have to be chrome but it would be nice.

Thanks
Jason

zeusflash · 08-20-2005, 11:13 PM

Why aren't any of these Suburban benches near me??????

jc · 08-20-2005, 11:22 PM

joe--someone i know local was asking about a 67-68 clip. ill call him tomarrow

.030over · 08-21-2005, 09:57 AM

Joe, I could use the front end. Is it all apart? Have any pictures?
If so send them to me ... dspat@comcast.net
Thanks,
Scott

**Hart_Rod** · 08-21-2005, 10:14 AM

Sorry to hear the news Joe, best of luck.

Rob

*FormerMember* · 08-21-2005, 10:18 AM

Sorry to hear about that Joe.

Hopefully, I can help.

I'd like the complete front clip. When's a good time to come for it?

LUV2XCLR8 · 08-21-2005, 10:40 AM

Quote:

Originally Posted by Hart_Rob

Sorry to hear the news Joe, best of luck.

Rob

**special-K** · 08-21-2005, 11:01 AM

Sorry about your twist of fate.Make it a turn for the better.I was in the same boat.If I had the money,I would have walked.It "seems" worked out now,this week,today,this morning(she worked last night and is sleeping).lol

jc · 08-21-2005, 09:26 PM

joe-- never mind the pms i sent about this tread. i have to pass, including the 67-68 front end. good luck, john

*FormerMember* · 08-21-2005, 10:04 PM

Still hoping to come down soon for the front clip. I am sending my parts out to be media blasted this week.

bagged91 · 08-22-2005, 03:25 PM

Thanks guys for the support. I'm at a loss for words. I just hope it won't affect my daughter

The front clip is apart and stored at 2 different locations. I don't have any eyebrow moldings & both the hoodbars are crap. I can get pics of any of this stuff but it may take awhile due to the circumstances.

*FormerMember* · 08-22-2005, 04:13 PM

Quote:

Originally Posted by bagged91

Thanks guys for the support. I'm at a loss for words. I just hope it won't affect my daughter

The front clip is apart and stored at 2 different locations. I don't have any eyebrow moldings & both the hoodbars are crap. I can get pics of any of this stuff but it may take awhile due to the circumstances.

One good thing about children is that they're very resilient. I know it's no consolation, but they WILL get over it.

I am interested in the front clip, still.

*FormerMember* · 08-23-2005, 12:19 PM

bumping, I need some contact information so I can come and poke around a bit.

:p

*chevytruckfan* · 08-23-2005, 02:24 PM

That engine and trans would be nice to have I would take it off your hands if crating and shipping charges won't kill me.

bagged91 · 08-23-2005, 05:17 PM

grendel, you can call me anytime before 9pm @ 856-589-0244... You did see that I listed it as one fender being an original 67 & the other is an aftermarket(not sure by who) 68 fender. Both hoods are driver shape only with one being worse than the other. The grille is perfect with original paint & no rot or surface rust(except some minor surface rust on the white painted grille "pockets") The grille trim is suitable for excellent daily driver. Headlight bezels have had the anodizing stripped and they have been polished, never got around to the hoops. I am a little flexible on the price. If you feel like a drive over the weekend, I am usually home after 2:30 on Saturday. Sunday I will have my daughter. I am about 20 minutes off of the NJ Turnpike either exit 2 or 3(right in the middle).

Chevytruckfan,
As far as crating & shipping the motor, it would probably cost close to $200 to ship it(at least)... If you are interested, call me & we can discuss it...

L8R - Joe

*FormerMember* · 08-23-2005, 05:35 PM

Quote:

Originally Posted by bagged91

grendel, you can call me anytime before 9pm @ 856-589-0244... You did see that I listed it as one fender being an original 67 & the other is an aftermarket(not sure by who) 68 fender. Both hoods are driver shape only with one being worse than the other. The grille is perfect with original paint & no rot or surface rust(except some minor surface rust on the white painted grille "pockets") The grille trim is suitable for excellent daily driver. Headlight bezels have had the anodizing stripped and they have been polished, never got around to the hoops. I am a little flexible on the price. If you feel like a drive over the weekend, I am usually home after 2:30 on Saturday. Sunday I will have my daughter. I am about 20 minutes off of the NJ Turnpike either exit 2 or 3(right in the middle).

L8R - Joe

Thanks for the info. I'll be calling in a little bit. edit: busy!

Does the 68 have the marker light hole?

As for the engine and transmission, I could bring it down as far as Kentucky, if you like.

bagged91 · 08-24-2005, 10:10 PM

Yeah, the 68' fender has the hole in it for the marker light(I was just going to shave it with the rear markers on my burb but...) It is brand new, never bolted on. I don't know who mfg'd it but I know it's aftermarket & I don't think it's Goodmark... I will hopefully have a cell phone by Friday night so you can call me on the cell if you like. I will PM the # for you...

*FormerMember* · 08-25-2005, 09:43 AM

Looks like I will be heading southward next week, say around Tuesday.

You could be the first stop on the way down or the last one on the way up.

If anyone wants something here, on the eastern sea board, I can haul it.

eastern72suburban · 08-25-2005, 10:56 AM

Joe sorry to here the news I've been there myself in the past.

There's a girl at work been wanting to buy a burb since her boyfriend seen mine in the parking lot. I won't see her till Mon. morning when we start back to work. Can you post pics and price of it and I'll print them out for her.

John

72 Burb daily driver

kbeefy · 08-26-2005, 02:22 AM

might be interested int he blue side boards, post or send pics when you get a chance. Thanks and Good Luck!

jc · 08-26-2005, 09:32 PM

pm sent

08-20-2005, 10:58 PM	#1
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Seperation forces sale... Everything must go... I have a ton of stuff I need to get rid of. My fiance & I are parting ways & I need the $$ to get my own place. Front clip for a 67/8 Chevy(drivers fender is an original 67, minor dings, no rot holes, pass fender is a new aftermarket 68). It comes with 2 hoods, rust & dent free grille, aluminum headlight trim & grill hoops, solid lower splash pan/grille brace & 2 hoodlatches and a straight core support that needs minor work under battery tray. I will not seperate. I need $300 for everything, picked up in Southern NJ. I have 2 complete sets of 72' Burb rear cargo panels. One set is parchment, the other is metalic blue. $100/set + shipping. They are starting to come off the backerboard but are decent otherwise. I have 2 middle row seats for a 67-72 burb. One with brackets for floor, other without. Both are parchment(one scroll, one custom cloth, both need recovering but have good foam). Sell them both for $100(must take both). Will not ship. 1976 454/T400(with bolt on yoke). Motor ran when pulled 2 years ago. Smoked very little. Ran cold & had good compression & oil pressure. T400 needs to be rebuilt. Need $750 for both. 1971 Burb' C10 project or parts truck. Med olive w/ dk olive custom cloth interior. Truck is fairly solid in the floors. Needs normal 1/4 panel work. Has 307(not running)/ 3spd. Missing brake booster & m/c and some interior pieces. Uncut dash. Need $1000 for it. Have original sales order for the truck too. 1972 C10 Cheyenne Super project or parts truck. Dark Olive/White with dk olive houndstooth bench. A/C cab with uncut dash. Was 350/T350. No motor but trans is there. Solid doors/bedfloor/coresupport. Cab has normal rocker & floor rust. Needs header fixed too. Truck is worth more in parts... $750 obo. I will make a nice package deal to anyone who wants it... Say, $2250 for it all... I need this stuff to move quickly so make me an offer if you don't like the price... Thanks... Joe __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

08-20-2005, 11:13 PM	#3
zeusflash Registered User Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 690	Why aren't any of these Suburban benches near me?????? __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

08-20-2005, 11:22 PM	#4
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	joe--someone i know local was asking about a 67-68 clip. ill call him tomarrow __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER)

08-21-2005, 09:57 AM	#5
.030over Junior Member Join Date: Mar 2005 Location: Maryland Posts: 129	67-68 Front end Joe, I could use the front end. Is it all apart? Have any pictures? If so send them to me ... dspat@comcast.net Thanks, Scott __________________ '67 SWB big block project '85 C60 school bus motorhome conversion

08-21-2005, 10:14 AM	#6
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Sorry to hear the news Joe, best of luck. Rob __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

08-20-2005, 11:05 PM	#2
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	I would be interested in 68 eyebrow mouldings and hood mouldings also if you have hood letters. Maybe even chrome grill hoops. It all doesn't have to be chrome but it would be nice. Thanks Jason

08-21-2005, 10:18 AM	#7
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Sorry to hear about that Joe. Hopefully, I can help. I'd like the complete front clip. When's a good time to come for it? Last edited by FormerMember; 08-21-2005 at 09:54 PM.

08-21-2005, 11:01 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Sorry about your twist of fate.Make it a turn for the better.I was in the same boat.If I had the money,I would have walked.It "seems" worked out now,this week,today,this morning(she worked last night and is sleeping).lol __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-21-2005, 09:26 PM	#10
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	joe-- never mind the pms i sent about this tread. i have to pass, including the 67-68 front end. good luck, john __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER)

08-21-2005, 10:04 PM	#11
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Still hoping to come down soon for the front clip. I am sending my parts out to be media blasted this week.

08-22-2005, 03:25 PM	#12
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Thanks guys for the support. I'm at a loss for words. I just hope it won't affect my daughter The front clip is apart and stored at 2 different locations. I don't have any eyebrow moldings & both the hoodbars are crap. I can get pics of any of this stuff but it may take awhile due to the circumstances. __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

08-23-2005, 12:19 PM	#14
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	bumping, I need some contact information so I can come and poke around a bit. :p

08-23-2005, 02:24 PM	#15
chevytruckfan Account Suspended Join Date: May 2004 Location: Lake Placid, Florida Posts: 930	That engine and trans would be nice to have I would take it off your hands if crating and shipping charges won't kill me.

08-23-2005, 05:17 PM	#16
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	grendel, you can call me anytime before 9pm @ 856-589-0244... You did see that I listed it as one fender being an original 67 & the other is an aftermarket(not sure by who) 68 fender. Both hoods are driver shape only with one being worse than the other. The grille is perfect with original paint & no rot or surface rust(except some minor surface rust on the white painted grille "pockets") The grille trim is suitable for excellent daily driver. Headlight bezels have had the anodizing stripped and they have been polished, never got around to the hoops. I am a little flexible on the price. If you feel like a drive over the weekend, I am usually home after 2:30 on Saturday. Sunday I will have my daughter. I am about 20 minutes off of the NJ Turnpike either exit 2 or 3(right in the middle). Chevytruckfan, As far as crating & shipping the motor, it would probably cost close to $200 to ship it(at least)... If you are interested, call me & we can discuss it... L8R - Joe __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

08-24-2005, 10:10 PM	#18
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Yeah, the 68' fender has the hole in it for the marker light(I was just going to shave it with the rear markers on my burb but...) It is brand new, never bolted on. I don't know who mfg'd it but I know it's aftermarket & I don't think it's Goodmark... I will hopefully have a cell phone by Friday night so you can call me on the cell if you like. I will PM the # for you... __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"



Register or Log In To remove these advertisements.

08-25-2005, 09:43 AM	#19
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Looks like I will be heading southward next week, say around Tuesday. You could be the first stop on the way down or the last one on the way up. If anyone wants something here, on the eastern sea board, I can haul it.

08-25-2005, 10:56 AM	#20
eastern72suburban Registered User Join Date: Jul 2005 Location: central Delaware Posts: 22	Joe sorry to here the news I've been there myself in the past. There's a girl at work been wanting to buy a burb since her boyfriend seen mine in the parking lot. I won't see her till Mon. morning when we start back to work. Can you post pics and price of it and I'll print them out for her. John 72 Burb daily driver

08-26-2005, 02:22 AM	#21
kbeefy Registered User Join Date: Jan 2005 Location: Alaska Posts: 39	might be interested int he blue side boards, post or send pics when you get a chance. Thanks and Good Luck! __________________ 70 k20 'burban (latest aqusition) 91 k1500 xcab lb 99 f350 (sold) 83 cj7 (huge and for sale) 82 rx7 (auto-x project) 74 VW superbettle 04 summit 800 151 & 05 renegade 600 guns, flying, camping, biking, 4-byin, bbq's and beer!

08-26-2005, 09:32 PM	#22
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	pm sent __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER)

Register or Log In To remove these advertisements.