Parting 71 big block camper special

[Hart_Rod]

All prices are + shipping. I don't mind bartering, let me know what you have .
(looking for truck tilt column, 68 50th passenger fender, dash pad, buddy buckets, big block stove pipe, tach dash, 3.73 posi)

If you see something I didn't price just ask.

Nice dash - $35
Sliding back glass - $50
Non-ac inner glove box - $15
Nice front windshield - $60 (no shipping)
71/72 bumper bracket - $40
71/72 park lights and brackets - $25
Good inner and outer heater box (no cracks) with control - $70
Nice tan column - $70
Tan seat belts (good buckles) - $25
Straight tailgate (few dings and littl rust at the botom) - $125 (no shipping)
Good tan visors - $20
TH-400 crossmember with ebrake clips - $45
Nearly perfect longbed floor -$200 or entire bed for $300
Automatic brake pedal setup - $40
Gas tank - $40 no shipping
High hump (4 x 4) - $25

Complete chassis with 5 lug disc, good powersteering box, posi rearend, driveshaft, heavy duty bumper - $400

Cab - $100 (needs rockers and some lower metal work)

I have more big block parts here (brackets/transmission/motor stands and mounts):


http://www.67-72chevytrucks.com/vboa...d.php?t=344168

[too much stuff]

Rob, just curious, this is a camper special 1/2 ton?

[Hart_Rod]

Originally Posted by too much stuff

Rob, just curious, this is a camper special 1/2 ton?

Affirmative!!! What ya need?

[special-K]

Got any pictures of the seat belts or visors?

[novafrog]

how much for tailgate ship to 25511 thanks

[Hart_Rod]

Originally Posted by novafrog

how much for tailgate ship to 25511 thanks

I would guess around $50-$75.

[Hart_Rod]

Originally Posted by special-K

Got any pictures of the seat belts or visors?

Here you go Tim. They're dirty but should clean up. One of the setbealts has some fraying but all the buckles are intact. I'll need to take some pictures of the visors, but they are not torn and the the threading looks great. I have one nice arm rest also. I'm including some pictures of some other parts also.

.
.

[too much stuff]

Did it have any emblems that were out of the norm?

[Hart_Rod]

Originally Posted by too much stuff

Did it have any emblems that were out of the norm?

Unfortunately not. The front clip and cab were swapped out, but check this out, ........

[turp mcspray]

How much for the tool box door? I have a buddy that needs one. Also how much for the p.s. pump? I have brackets but price it with and without. Thanks!

[Hart_Rod]

$150 for the pump, pulley, brackets and reservoir. I don't want to separate.

[DANTIP]

I want fist chance at the heat stove metal on the driver's side exhaust manifold. I would also want the tube that extends to the air cleaner as well.

Thanks!

[402GMC]

How much for the th400 kick down switch and harness and all of the toolbox components?

[Hart_Rod]

Originally Posted by DANTIP

I want fist chance at the heat stove metal on the driver's side exhaust manifold. I would also want the tube that extends to the air cleaner as well.

Thanks!

As of right now, I'm not selling any parts of of this engine. I'll let you know if something changes. I do have some other Big Block parts for sale in another thread (brackets, TH-400 transmission, etc)

Originally Posted by 402GMC

How much for the th400 kick down switch and harness and all of the toolbox components?

I'll have to look and see if the kickdown is still there. $400 for the toolbox door, inner box, all three pieces of chrome. No rust and the woodgrain looks nearly new.

R/

[Matt72blaze]

Hey Rob,

I'll come get the front and rear windshield on Friday if you can hold them???

Matt

[68 longbed]

hey man you still in pcola? If so I want the sliding back glass. Pm me with tour phone number as I just live across the border in Elberta .

[Hart_Rod]

Originally Posted by Matt72blaze

Hey Rob,

I'll come get the front and rear windshield on Friday if you can hold them???

Matt

Matt, they're yours. I was thinking about you last night when I posted this, . You're going to have to cut them out........

Originally Posted by 68 longbed

hey man you still in pcola? If so I want the sliding back glass. Pm me with tour phone number as I just live across the border in Elberta .

I'm still in NM but will be moving back to Pensacola in August.

[Matt72blaze]

Originally Posted by Hart_Rod

Matt, they're yours. I was thinking about you last night when I posted this, . You're going to have to cut them out........

no problem! thanks man! I'll pm you for a phone number.

[71 super]

I have a friend who might be interested in the gate pending pictures and price. He will be in the New Mexico area in the next week so he could pick it up. Let me know thanks, Harold

[Hart_Rod]

Originally Posted by 71 super

I have a friend who might be interested in the gate pending pictures and price. He will be in the New Mexico area in the next week so he could pick it up. Let me know thanks, Harold

Harold - do you know when he'll be here? I'll be in Fl the 29th through the 6th. Other than that, he can come over about any time. I'll PM you my number and email.

R/

[Hart_Rod]

Here are some more pictures of the parts......

complete set of 72 front bumper brackets - $40
super nice bed floor (no rust or dents that I can see) - $200
good rear bumper and brackets - $40
complete spare tire carrier - $45

[Hart_Rod]

more pictures...

[muscletrucks]

Has the tool box sold? If not how much to ship to 64030?

[Hart_Rod]

Originally Posted by muscletrucks

Has the tool box sold? If not how much to ship to 64030?

I've still got it. $440 shipped for the door, the fiberglass box, brackets and all 3 pieces of trim. I will box it up well enough to make sure nothing gets damaged. Let me know.

[muscletrucks]

I need a day to think about this. Can I see a pic of the box with the door open please?