Project Blaz-Air - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 06-09-2009, 03:18 PM

Quote:

Originally Posted by LUV2XCLR8

HR, Was that 68 on CL? (I saw that thing but it was too far away)

It may have been. I saw it here:

http://67-72chevytrucks.com/vboard/s...d.php?t=344786

*1sik52* · 06-28-2009, 11:12 PM

Update: The guy who I purchased the LS1 from jerked me around and tried to take my money, but after making a claim with paypal and ebay I was able to get a refund and then i purchased something much better than a LS1...... A LS2 with the 6 speed out of a 06 GTO!!!! Picked it up from a local guy here with only 17,000 miles on it. This should be good for the new 22x12s!!

VA72C10 · 06-28-2009, 11:21 PM

Very cool.....that should be some good motivation

5150 · 06-28-2009, 11:42 PM

very cool!!!

*1sik52* · 07-08-2009, 07:56 PM

Made another nice purchase today that put a really nice dent in my wallet!

20x8.5 Front
22x12 Rear

VA72C10 · 07-08-2009, 09:29 PM

Those are sik...

Nice choice!

nuke1 · 07-09-2009, 02:07 PM

very very nice purchases there. nothin like adding modern drivertrain. one question thou, what are you gonna do for the transmission yoke, did you manage to get the front of the driveshaft, that way you can make up a driveshaft.

*1sik52* · 07-09-2009, 02:10 PM

Yes, I have the complete drivetrain from the engine to the rear end

prostreetC-10 · 07-09-2009, 04:44 PM

By looking at all of the saran wrap....it looks like your motor is into that "auto asphyxiation"!!!! lol

*1sik52* · 08-09-2009, 09:19 PM

I know its been a while since I posted any updates but I was finally able to get out in the garage and devote some time to the Blazer. I removed the front cap, front suspension and have everything disconnected and ready to pull the engine out which I will do tomorrow. All this so I can install my dropmember and get things lined up to install the LS2 and tranny. The poor 52 has to move to my buddys house for a little while so I can lift the tub off the frame and have room to work on both frame and body at the same time. Found a little rust when I removed the heater box. I will knock that out and shave the firewall while the engine is pulled.

**Hart_Rod** · 08-09-2009, 09:23 PM

What motor and tranny are currently in it and what are you going to do with it?

*1sik52* · 08-09-2009, 10:06 PM

350 w/ edelbrock aluminum intake and carburator and 700r4 w/ lock up converter. Gonna sell it and the Boyd Coddingtons as well

**Hart_Rod** · 08-09-2009, 10:28 PM

Quote:

Originally Posted by 1sik52

350 w/ edelbrock aluminum intake and carburator and 700r4 w/ lock up converter. Gonna sell it and the Boyd Coddingtons as well

Can you give me a price on the motor and tranny? I have someone looking for that exact setup. What size are the wheels? How much for them?

*1sik52* · 08-09-2009, 10:39 PM

Make me an offer on the engine and tranny. I dont want it to sit around to long once I pull it. Its very strong and runs great. Just want to go with the new EFI. The wheels I will take 1500 for rims and tires and will also throw in the bag plates and control arms in with the wheels as well if you want them

wheels are 20x10 rear and 17x8 front. Nice wheels

*1sik52* · 08-17-2009, 05:42 PM

UPS just dropped of my wheels. OMG! these things are so fine. Just slipped the rim on and it looks like I will have to narrow the rearend 4 inches on each side! Cant Wait

VA72C10 · 08-17-2009, 05:51 PM

You gotta give us some pictures...I just posted my 22's in my build thread

*1sik52* · 08-17-2009, 06:28 PM

ENJOY!

pcmcobra · 08-17-2009, 07:42 PM

Money$!$!

VA72C10 · 08-17-2009, 07:55 PM

wow!

*1sik52* · 08-18-2009, 06:09 PM

Thanks Guys! Pulling the rearend this weekend and having it narrowed a total of 8 inches and hopefully I will have the dropmember installed also.

*1sik52* · 08-19-2009, 07:47 PM

Little more work today. I pulled the 350, dropped the original crossmember cleaned up the frame a little and started mocking up the Porterbuilt Dropmember. looks like im going to have to drill out the mounting holes a little in the frame in order to bolt the dropmember.

VA72C10 · 08-19-2009, 08:10 PM

Good progress. What color are you going with for the chassis?

*1sik52* · 08-19-2009, 08:50 PM

Galaxy Gray. Its almost like a charcoal gray

VA72C10 · 08-26-2009, 11:58 PM

Any more progress?

*1sik52* · 09-03-2009, 08:48 AM

After removing the rockers that the PO threw on I found some redneck body work that the PO did. Seems that they had patched over rust that was in the floor pan and then just put some new rockers on top of the patches. So I have spent some time removing and replacing.

06-28-2009, 11:12 PM	#52
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Project Blaz-Air Update: The guy who I purchased the LS1 from jerked me around and tried to take my money, but after making a claim with paypal and ebay I was able to get a refund and then i purchased something much better than a LS1...... A LS2 with the 6 speed out of a 06 GTO!!!! Picked it up from a local guy here with only 17,000 miles on it. This should be good for the new 22x12s!!

06-28-2009, 11:21 PM	#53
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project Blaz-Air Very cool.....that should be some good motivation __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-28-2009, 11:42 PM	#54
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,279	Re: Project Blaz-Air very cool!!! __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

07-08-2009, 07:56 PM	#55
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Project Blaz-Air Made another nice purchase today that put a really nice dent in my wallet! 20x8.5 Front 22x12 Rear

07-08-2009, 09:29 PM	#56
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project Blaz-Air Those are sik... Nice choice! __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-09-2009, 02:07 PM	#57
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Project Blaz-Air very very nice purchases there. nothin like adding modern drivertrain. one question thou, what are you gonna do for the transmission yoke, did you manage to get the front of the driveshaft, that way you can make up a driveshaft. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

07-09-2009, 02:10 PM	#58
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Project Blaz-Air Yes, I have the complete drivetrain from the engine to the rear end

07-09-2009, 04:44 PM	#59
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: Project Blaz-Air By looking at all of the saran wrap....it looks like your motor is into that "auto asphyxiation"!!!! lol __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!

08-09-2009, 09:19 PM	#60
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Project Blaz-Air I know its been a while since I posted any updates but I was finally able to get out in the garage and devote some time to the Blazer. I removed the front cap, front suspension and have everything disconnected and ready to pull the engine out which I will do tomorrow. All this so I can install my dropmember and get things lined up to install the LS2 and tranny. The poor 52 has to move to my buddys house for a little while so I can lift the tub off the frame and have room to work on both frame and body at the same time. Found a little rust when I removed the heater box. I will knock that out and shave the firewall while the engine is pulled.

08-09-2009, 09:23 PM	#61
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,827	Re: Project Blaz-Air What motor and tranny are currently in it and what are you going to do with it? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

08-09-2009, 10:06 PM	#62
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Project Blaz-Air 350 w/ edelbrock aluminum intake and carburator and 700r4 w/ lock up converter. Gonna sell it and the Boyd Coddingtons as well

08-09-2009, 10:39 PM	#64
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Project Blaz-Air Make me an offer on the engine and tranny. I dont want it to sit around to long once I pull it. Its very strong and runs great. Just want to go with the new EFI. The wheels I will take 1500 for rims and tires and will also throw in the bag plates and control arms in with the wheels as well if you want them wheels are 20x10 rear and 17x8 front. Nice wheels Last edited by 1sik52; 08-09-2009 at 10:40 PM.

08-17-2009, 05:42 PM	#65
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Project Blaz-Air UPS just dropped of my wheels. OMG! these things are so fine. Just slipped the rim on and it looks like I will have to narrow the rearend 4 inches on each side! Cant Wait

08-17-2009, 05:51 PM	#66
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project Blaz-Air You gotta give us some pictures...I just posted my 22's in my build thread __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-17-2009, 06:28 PM	#67
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Project Blaz-Air ENJOY!



Register or Log In To remove these advertisements.

08-17-2009, 07:42 PM	#68
pcmcobra Registered User Join Date: Aug 2006 Location: Florida Posts: 1,684	Re: Project Blaz-Air Money$!$! __________________ 1986 C10 SWB 6.0/6l90e Miami...Flee it like a native

08-17-2009, 07:55 PM	#69
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project Blaz-Air *wow!* __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-18-2009, 06:09 PM	#70
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Project Blaz-Air Thanks Guys! Pulling the rearend this weekend and having it narrowed a total of 8 inches and hopefully I will have the dropmember installed also.

08-19-2009, 07:47 PM	#71
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Project Blaz-Air Little more work today. I pulled the 350, dropped the original crossmember cleaned up the frame a little and started mocking up the Porterbuilt Dropmember. looks like im going to have to drill out the mounting holes a little in the frame in order to bolt the dropmember.

08-19-2009, 08:10 PM	#72
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project Blaz-Air Good progress. What color are you going with for the chassis? __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-19-2009, 08:50 PM	#73
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Project Blaz-Air Galaxy Gray. Its almost like a charcoal gray

08-26-2009, 11:58 PM	#74
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project Blaz-Air Any more progress? __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-03-2009, 08:48 AM	#75
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Project Blaz-Air After removing the rockers that the PO threw on I found some redneck body work that the PO did. Seems that they had patched over rust that was in the floor pan and then just put some new rockers on top of the patches. So I have spent some time removing and replacing.

Register or Log In To remove these advertisements.