LS376 / 480 With 4L80E - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mooseknuckles · 02-18-2012, 08:20 PM

good to know.....thanks.

mcmlxix · 02-20-2012, 02:11 AM

Quote:

Originally Posted by BigShoe24

Great quality. I'm very happy with the fit as well.

So which ones did you end up with? P/N?

brownge · 02-20-2012, 10:43 AM

Which headers did you end up going with?

Thanks for the pics. About to do this myself.

mooseknuckles · 02-20-2012, 10:49 AM

I believe he's runnin the Dynotech 70-81 camaro pn#715-29410 which I'm about to order as well....

jtp67-72 · 02-20-2012, 08:53 PM

Quote:

Originally Posted by BigShoe24

Great quality. I'm very happy with the fit as well.

Which set is this??? thanx jim

BigShoe24 · 02-22-2012, 11:05 PM

Quote:

Originally Posted by mooseknuckles

I believe he's runnin the Dynotech 70-81 camaro pn#715-29410 which I'm about to order as well....

These are the set.

jtp67-72 · 02-23-2012, 09:38 PM

Quote:

Originally Posted by BigShoe24

These are the set.

I must have had brain fade---thanx jim

68GMCCustom · 02-23-2012, 11:44 PM

what were we talking about?

c10seconds · 02-27-2012, 04:02 AM

Is there anyway you could post a pic of where the headers are from the bottom of the frame rails?
Posted via Mobile Device

BigShoe24 · 03-18-2012, 10:23 PM

Anyone help me out with flipping this picture? Sorry.

68GMCCustom · 03-18-2012, 10:49 PM

here you go!

BigShoe24 · 10-07-2012, 08:16 PM

Got my pulley's on...

19seventeeCustom · 10-08-2012, 05:43 PM

very nice!!!! keep it up
Posted via Mobile Device

BigShoe24 · 02-28-2013, 11:34 PM

Could anyone recommend a good starter for this LS3? Not sure why GM charges so much for the OEM, oh wait..Thanks

c10seconds · 03-01-2013, 12:03 AM

GM isnt too bad as long as youre not paying full retail. Did you look at gmpartsdirect?
Posted via Mobile Device

mooseknuckles · 03-01-2013, 12:54 PM

Msd....

ls1nova71 · 03-01-2013, 02:06 PM

Quote:

Originally Posted by BigShoe24

Could anyone recommend a good starter for this LS3? Not sure why GM charges so much for the OEM, oh wait..Thanks

Look here. http://ls1tech.com/forums/conversion...ter-swaps.html

BigShoe24 · 03-07-2013, 12:01 AM

Anyone running one of these.....sold by APS Racing

mcmlxix · 03-07-2013, 04:03 AM

my original plan was an MSD starter ... $229 from Summit - never got that far...

MSD DynaForce Starters 5096

**Hart_Rod** · 03-11-2013, 03:23 PM

Your accessory setup looks awesome! What's the brand?

BigShoe24 · 04-19-2013, 11:21 PM

Concept One; really nice product.

Is the MSD starter compatible with an LS3 & 4L80e set up? Thanks
Posted via Mobile Device

mcmlxix · 04-20-2013, 12:26 AM

Quote:

Originally Posted by BigShoe24

Concept One; really nice product.

Is the MSD starter compatible with an LS3 & 4L80e set up? Thanks
Posted via Mobile Device

HERE are the install instructions.... it's clockable so it should clear just about anything... I was planning on running a T56 so I can't comment on the 4L80e....

BigShoe24 · 04-23-2013, 10:39 PM

Got a little more hardware
Posted via Mobile Device
Posted via Mobile Device

okieraptor · 04-24-2013, 12:20 PM

that looks awsome!!!!!!!

BigShoe24 · 06-08-2013, 10:06 PM

I'm about to wire up my starter and alternator. Does anyone have a link or diagram for the best way to do this. I want to keep the wiring minimal and appreciate any suggestions anyone has.

02-18-2012, 08:20 PM	#26
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: LS376 / 480 With 4L80E good to know.....thanks. __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

02-20-2012, 10:43 AM	#28
brownge Registered User Join Date: Jun 2008 Location: Magnolia, TX Posts: 224	Re: LS376 / 480 With 4L80E Which headers did you end up going with? Thanks for the pics. About to do this myself.

02-20-2012, 10:49 AM	#29
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: LS376 / 480 With 4L80E I believe he's runnin the Dynotech 70-81 camaro pn#715-29410 which I'm about to order as well.... __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

02-23-2012, 11:44 PM	#33
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: LS376 / 480 With 4L80E what were we talking about? __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

02-27-2012, 04:02 AM	#34
c10seconds Registered User Join Date: Oct 2009 Location: gilbert,AZ Posts: 947	Re: LS376 / 480 With 4L80E Is there anyway you could post a pic of where the headers are from the bottom of the frame rails? Posted via Mobile Device

03-18-2012, 10:23 PM	#35
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: LS376 / 480 With 4L80E Anyone help me out with flipping this picture? Sorry. Attached Images __________________ RCC

03-18-2012, 10:49 PM	#36
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: LS376 / 480 With 4L80E here you go! Attached Images __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

10-07-2012, 08:16 PM	#37
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: LS376 / 480 With 4L80E Got my pulley's on... Attached Images __________________ RCC

10-08-2012, 05:43 PM	#38
19seventeeCustom Registered User Join Date: Mar 2010 Location: Downtown Posts: 573	Re: LS376 / 480 With 4L80E very nice!!!! keep it up Posted via Mobile Device

02-28-2013, 11:34 PM	#39
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: LS376 / 480 With 4L80E Could anyone recommend a good starter for this LS3? Not sure why GM charges so much for the OEM, oh wait..Thanks __________________ RCC

03-01-2013, 12:03 AM	#40
c10seconds Registered User Join Date: Oct 2009 Location: gilbert,AZ Posts: 947	Re: LS376 / 480 With 4L80E GM isnt too bad as long as youre not paying full retail. Did you look at gmpartsdirect? Posted via Mobile Device

03-01-2013, 12:54 PM	#41
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: LS376 / 480 With 4L80E Msd.... __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

03-07-2013, 12:01 AM	#43
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: LS376 / 480 With 4L80E Anyone running one of these.....sold by APS Racing Attached Images __________________ RCC

03-07-2013, 04:03 AM	#44
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: LS376 / 480 With 4L80E my original plan was an MSD starter ... $229 from Summit - never got that far... MSD DynaForce Starters 5096 __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

03-11-2013, 03:23 PM	#45
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Re: LS376 / 480 With 4L80E Your accessory setup looks awesome! What's the brand? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3



Register or Log In To remove these advertisements.

04-19-2013, 11:21 PM	#46
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: LS376 / 480 With 4L80E Concept One; really nice product. Is the MSD starter compatible with an LS3 & 4L80e set up? Thanks Posted via Mobile Device __________________ RCC

04-23-2013, 10:39 PM	#48
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: LS376 / 480 With 4L80E Got a little more hardware Posted via Mobile Device Posted via Mobile Device Attached Images __________________ RCC

04-24-2013, 12:20 PM	#49
okieraptor Registered User Join Date: Mar 2010 Location: northern texas, southern oklahoma Posts: 144	Re: LS376 / 480 With 4L80E that looks awsome!!!!!!! __________________ 82 chevy longbed(grey truck)first truck when i was 15!

06-08-2013, 10:06 PM	#50
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: LS376 / 480 With 4L80E I'm about to wire up my starter and alternator. Does anyone have a link or diagram for the best way to do this. I want to keep the wiring minimal and appreciate any suggestions anyone has. __________________ RCC

Register or Log In To remove these advertisements.