'66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... - Page 66 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hgs_notes · 02-08-2013, 01:28 PM

Sorcery!

Jonboy · 02-08-2013, 01:32 PM

With a name like "picklex" I would have thought you would put cucumbers in it....

While the 'beam is on the rotissifier, you may look into doing a spray on bedliner or such to the underside. We did that on a Monte Carlo we took off the frame, worked like buttah!

watahyahknow · 02-08-2013, 05:55 PM

its not the stuff i was talking about , i am however wondering wat would happen if you leave some metal submerged in the stuff (like inside some boxsection ) , it looks like its some sort of acid that could keep eating away at the metal

**Palf70Step** · 02-08-2013, 06:20 PM

Looks interesting. Need to do some more checking into it.

Rust is definitely an issue on anything lying around down here very long.

theastronaut · 02-08-2013, 07:11 PM

You may have said and I forgot or overlooked it- are you going to strip the car to bare metal?
Posted via Mobile Device

Frizzle Fry · 02-08-2013, 07:39 PM

Quote:

Originally Posted by hgs_notes

Sorcery!

Quote:

Originally Posted by Jonboy

With a name like "picklex" I would have thought you would put cucumbers in it....

While the 'beam is on the rotissifier, you may look into doing a spray on bedliner or such to the underside. We did that on a Monte Carlo we took off the frame, worked like buttah!

Check out the second pic in this post

Quote:

Originally Posted by watahyahknow

its not the stuff i was talking about , i am however wondering wat would happen if you leave some metal submerged in the stuff (like inside some boxsection ) , it looks like its some sort of acid that could keep eating away at the metal

Nope, it can be left on there (simply wiped off) and just scuffed up to apply epoxy primer right over it. Read up.

Quote:

Originally Posted by Palf70Step

Looks interesting. Need to do some more checking into it.

Rust is definitely an issue on anything lying around down here very long.

You can even find it mentioned with positive result elsewhere on this site. I'll let you guys know what I think of it shortly.

Quote:

Originally Posted by theastronaut

You may have said and I forgot or overlooked it- are you going to strip the car to bare metal?
Posted via Mobile Device

Not fully bare, just down to a good base. Whatever has been holding on this long and doesn't knock off with some sanding will be a fine base for epoxy and 2k.

Frizzle Fry · 02-11-2013, 03:09 AM

Well, no pics but so far so good with the Picklex. It does remove surface/flash rust very well. Not sure about the long term protection and all the other claims yet. Time will tell...

ksucatz · 03-27-2013, 01:06 AM

I just saw this today and thought of the Beam
http://www.speedhunters.com/2013/03/...-fitted-to-it/

Next project.....Stupid big turbo?

LooseCannon · 03-30-2013, 10:32 PM

Question on the rotisserie, do you think it could be adjusted down to work with a C10 cab? Thx

watahyahknow · 03-30-2013, 10:53 PM

i seen sumtin else that worked well on truckcabs two big L shaped pieces made from box steel that bolted intoo the chassismount holes
you put it on the floor and just push it over to work on the bottom , its a whole lot cheaper and simpler to make than a rotissery

this might work too

Frizzle Fry · 03-30-2013, 11:52 PM

Hey guys. I'm just finishing up about two months straight of working 6days/wk 12+hrs/day (had 14 in a row in there somewhere). 2.5 weeks off coming up! Driftbeam will be getting some serious love soon!!!

Quote:

Originally Posted by ksucatz

I just saw this today and thought of the Beam
http://www.speedhunters.com/2013/03/...-fitted-to-it/

Next project.....Stupid big turbo?

That thing is so badass! No turbo for mine. SC if anything (no messing with exhaust).

Quote:

Originally Posted by LooseCannon

Question on the rotisserie, do you think it could be adjusted down to work with a C10 cab? Thx

It can! the center span is fully adjustable. It's so nice to flip the body over with no effort and set it at any angle you want

Quote:

Originally Posted by watahyahknow

i seen sumtin else that worked well on truckcabs two big L shaped pieces made from box steel that bolted intoo the chassismount holes
you put it on the floor and just push it over to work on the bottom , its a whole lot cheaper and simpler to make than a rotissery

Cheap is good. It all depends on your wants/needs.

nuke1 · 04-11-2013, 02:14 AM

WTF!!!! I disappear for a wee bit from the forum and come back to this!!!! a shell of a car, I jsut can not believe it, just can't let good things be can ya, have to go and tear it apart and start to beautify it now, well...... AWESOME!!!!!! can not wait to see a shiney car now.

Frizzle Fry · 04-11-2013, 04:32 AM

Quote:

Originally Posted by nuke1

WTF!!!! I disappear for a wee bit from the forum and come back to this!!!! a shell of a car, I jsut can not believe it, just can't let good things be can ya, have to go and tear it apart and start to beautify it now, well...... AWESOME!!!!!! can not wait to see a shiney car now.

Good timing Nuke

I've had very little shop time for the last couple months due to crazy work hours (6x12+) weeks plus travel. But I am now off for two weeks

The goal is to have the car to the paint booth before I go back!

Here's a little sneak peek of what I've been up to:

Posted via Mobile Device

mcbassin · 04-11-2013, 08:19 AM

Very clean seam sealer. I may have to steal that trick myself. Nice work.

Frizzle Fry · 04-11-2013, 03:26 PM

I can't take credit for that one. Works well.
Posted via Mobile Device

panelrodder81 · 04-11-2013, 03:58 PM

I saw that trick on one of the Powerblock shows a few years back. Highly recommend it!

LOVE this build btw. You do amazing work that makes me cry as I realize how truly poor everything I do is!

-Panelrodder

**67cheby** · 04-11-2013, 04:04 PM

nice trick !

watahyahknow · 04-11-2013, 06:40 PM

they seal bathtubs tiled corners and kitchen aplyances that way too

Frizzle Fry · 04-13-2013, 01:45 PM

Quote:

Originally Posted by panelrodder81

I saw that trick on one of the Powerblock shows a few years back. Highly recommend it!

LOVE this build btw. You do amazing work that makes me cry as I realize how truly poor everything I do is!

-Panelrodder

Yep, I found it on youtube

Thanks man. I owe 90% of my automotive knowledge to internet communities

Quote:

Originally Posted by 67cheby

nice trick !

Quote:

Originally Posted by watahyahknow

they seal bathtubs tiled corners and kitchen aplyances that way too

Whatdoyaknow?

More pics (from a real camera this time).

Finally closed up the gaps in the rear floor exhaust clearancing:

Driver's Side cleaned up:

Prep for Rust Encapsulator application in the hard-to-reach areas:

Weapon of choice (reached deep inside the rockers with this)

Looks thick here, but it levelled out pretty nicely:

...and another shot of the seam sealage (messy looking stuff near the front is actually rust encapsulator:

71swb4x4 · 04-13-2013, 05:31 PM

That looks very nice!

dammitmitchell · 04-13-2013, 07:43 PM

what seam sealer is that? i diddnt see it in the above posts.

watahyahknow · 04-13-2013, 08:07 PM

by the way if youre tired of ripping youre finger on ragged edges of the metal while smoothing the bead of sealant you could use a round brush with the hairs taped up to about 2/3th of the way it presses the chaulk in further too

67ChevyRedneck · 04-13-2013, 10:25 PM

You're going to need to bring mirrors with you to shows!

watahyahknow · 04-13-2013, 10:29 PM

he needs to clearcoat the metalfinish itself , leaving the metalwork and welding visible , i bet there would be a lot of techheads and sheetmetalworkers who would like to see what's done to the car or how he did a perticulair job when he shows the car off

Frizzle Fry · 04-14-2013, 02:45 AM

It's all getting covered with body colored Raptor Liner

Seam Sealer is Fusor 803.

02-08-2013, 01:28 PM	#1626
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,120	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Sorcery! __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

02-08-2013, 01:32 PM	#1627
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... With a name like "picklex" I would have thought you would put cucumbers in it.... While the 'beam is on the rotissifier, you may look into doing a spray on bedliner or such to the underside. We did that on a Monte Carlo we took off the frame, worked like buttah!

02-08-2013, 05:55 PM	#1628
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... its not the stuff i was talking about , i am however wondering wat would happen if you leave some metal submerged in the stuff (like inside some boxsection ) , it looks like its some sort of acid that could keep eating away at the metal __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

02-08-2013, 06:20 PM	#1629
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,749	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Looks interesting. Need to do some more checking into it. Rust is definitely an issue on anything lying around down here very long. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

02-08-2013, 07:11 PM	#1630
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,871	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... You may have said and I forgot or overlooked it- are you going to strip the car to bare metal? Posted via Mobile Device __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

02-11-2013, 03:09 AM	#1632
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Well, no pics but so far so good with the Picklex. It does remove surface/flash rust very well. Not sure about the long term protection and all the other claims yet. Time will tell...

03-27-2013, 01:06 AM	#1633
ksucatz Suppose to be workin........ Join Date: Jul 2001 Location: Shawnee, KS USA Posts: 164	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... I just saw this today and thought of the Beam http://www.speedhunters.com/2013/03/...-fitted-to-it/ Next project.....Stupid big turbo? __________________ Brent '68 C10 '70 C10 '72 LeMans "03 Trailblazer "Stupidity is like a skill, some are born with it and some develop it over a period of time."" Author unknown

03-30-2013, 10:32 PM	#1634
LooseCannon Registered User Join Date: Mar 2004 Location: Boiling Springs, PA Posts: 391	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Question on the rotisserie, do you think it could be adjusted down to work with a C10 cab? Thx __________________ Bagged 05 Suburban Bagged Baby Blue 68

03-30-2013, 10:53 PM	#1635
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... i seen sumtin else that worked well on truckcabs two big L shaped pieces made from box steel that bolted intoo the chassismount holes you put it on the floor and just push it over to work on the bottom , its a whole lot cheaper and simpler to make than a rotissery this might work too __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

04-11-2013, 02:14 AM	#1637
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... WTF!!!! I disappear for a wee bit from the forum and come back to this!!!! a shell of a car, I jsut can not believe it, just can't let good things be can ya, have to go and tear it apart and start to beautify it now, well...... AWESOME!!!!!! can not wait to see a shiney car now. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

04-11-2013, 08:19 AM	#1639
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Very clean seam sealer. I may have to steal that trick myself. Nice work. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

04-11-2013, 03:26 PM	#1640
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... I can't take credit for that one. Works well. Posted via Mobile Device

04-11-2013, 03:58 PM	#1641
panelrodder81 Doin' it live! Join Date: Jan 2010 Location: Eagle Mountain, Utah Posts: 471	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... I saw that trick on one of the Powerblock shows a few years back. Highly recommend it! LOVE this build btw. You do amazing work that makes me cry as I realize how truly poor everything I do is! -Panelrodder __________________ -Panelrodder 1953 GMC Panel truck - 'Curly' 1961 Chevy Suburban - 'Larry' - Sold 2005 Harley Sportster - 'Shemp'

04-11-2013, 04:04 PM	#1642
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... nice trick ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-11-2013, 06:40 PM	#1643
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... they seal bathtubs tiled corners and kitchen aplyances that way too __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts



Register or Log In To remove these advertisements.

04-13-2013, 05:31 PM	#1645
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... That looks very nice! __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

04-13-2013, 07:43 PM	#1646
dammitmitchell the pollock Join Date: May 2008 Location: abilene, texas Posts: 4,423	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... what seam sealer is that? i diddnt see it in the above posts. __________________ Jack of ALL trades, Master of none.. (but one... procrastination) Army vet 02-08 RIP El Jay! Miss you brother! http://67-72chevytrucks.com/vboard/s...d.php?t=343538 http://67-72chevytrucks.com/vboard/s...d.php?t=386042

04-13-2013, 08:07 PM	#1647
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... by the way if youre tired of ripping youre finger on ragged edges of the metal while smoothing the bead of sealant you could use a round brush with the hairs taped up to about 2/3th of the way it presses the chaulk in further too __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

04-13-2013, 10:25 PM	#1648
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... You're going to need to bring mirrors with you to shows! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

04-13-2013, 10:29 PM	#1649
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... he needs to clearcoat the metalfinish itself , leaving the metalwork and welding visible , i bet there would be a lot of techheads and sheetmetalworkers who would like to see what's done to the car or how he did a perticulair job when he shows the car off __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

04-14-2013, 02:45 AM	#1650
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... It's all getting covered with body colored Raptor Liner Seam Sealer is Fusor 803.

Register or Log In To remove these advertisements.