Project "Old Aux" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PBFAB.COM · 08-20-2009, 12:35 AM

Well, I wonder what could be happening to this one?

**Hart_Rod** · 08-20-2009, 01:10 AM

................

n2billet · 08-20-2009, 05:47 AM

In the far distance, I can hear faint sound of a sawzall.......

mcbassin · 08-20-2009, 07:50 AM

Looks pretty darn good the way it is right now. Also looks pretty expensive. You pick this thing up just the way it sits?

72BlckButy · 08-20-2009, 08:06 AM

Uh-oh..... this my friends will get interesting.

Nate, what's the current suspension setup?

Subscribed!

GVizzle · 08-20-2009, 11:01 AM

Quote:

Originally Posted by 72BlckButy

Uh-oh..... this my friends will get interesting.

Nate, what's the current suspension setup?

Subscribed!

All going away.

Front- ECE 2.5 drop spindle, 2 inch drop spring, sway bar

Rear- ECE 5 inch drop spring, CPP 1.5 inch block, CPP C-notch theres also 2 12 bolt rearends in the back of the bed when the pic was takin so its saggin in the rear a little.

Tires- Front 245/60/15 Mickey Thompson Sportsman S/T
Rear 295/50/15 Mickey Thompson Sportsman S/T

n2billet · 08-20-2009, 12:36 PM

Quote:

Originally Posted by GVizzle

All going away.

Front- ECE 2.5 drop spindle, 2 inch drop spring, sway bar

Rear- ECE 5 inch drop spring, CPP 1.5 inch block, CPP C-notch theres also 2 12 bolt rearends in the back of the bed when the pic was takin so its saggin in the rear a little.

Tires- Front 245/60/15 Mickey Thompson Sportsman S/T
Rear 295/50/15 Mickey Thompson Sportsman S/T

You must be the owner.......Nate told me whats in store for it.....I'm jealous beyond words.....

72BlckButy · 08-20-2009, 01:26 PM

Quote:

Originally Posted by Mordachai

^ ditto

is it just me, or do the rear tires look awful wide in the first pic?(and for some reason, not so wide in the last pic?)

Shadows my friend, shadows...

But I do see what you are saying.

Quote:

Originally Posted by GVizzle

All going away.

Front- ECE 2.5 drop spindle, 2 inch drop spring, sway bar

Rear- ECE 5 inch drop spring, CPP 1.5 inch block, CPP C-notch theres also 2 12 bolt rearends in the back of the bed when the pic was takin so its saggin in the rear a little.

Tires- Front 245/60/15 Mickey Thompson Sportsman S/T
Rear 295/50/15 Mickey Thompson Sportsman S/T

Thanks for the info GVizzle, and can't wait to see what your money is going to buy.

Quote:

Originally Posted by n2billet

You must be the owner.......Nate told me whats in store for it.....I'm jealous beyond words.....

Now Keith, there are no secrets among friends, and we are all friends on here...

Just kidding, I love the suspense!!!!

gcburdic · 08-20-2009, 08:09 AM

Here to watch and learn!!

**lolife99** · 08-20-2009, 08:33 AM

Subscribing,...

Mordachai · 08-20-2009, 09:51 AM

^ ditto

is it just me, or do the rear tires look awful wide in the first pic?(and for some reason, not so wide in the last pic?)

GVizzle · 08-20-2009, 10:21 AM

Is it the new "porterbuilt Liftmember" you're puttin on that thing?

PBFAB.COM · 08-20-2009, 10:41 AM

Quote:

Originally Posted by GVizzle

Is it the new "porterbuilt Liftmember" you're puttin on that thing?

You might have me confused.... we don't make a "Raised Crossmember".

bigguy69 · 08-20-2009, 10:32 AM

subscribed!!

nuke1 · 08-20-2009, 10:53 AM

oh the suspense!

VA72C10 · 08-20-2009, 11:11 AM

I'll be watching this one

Mordachai · 08-20-2009, 11:15 AM

nate- I think he was hinting that he'd like to see a 'raised crossmember' lol.

my67chevytruck · 08-20-2009, 01:28 PM

Spill the frijoles!!!!!!

Twisted78SS · 08-20-2009, 01:56 PM

Subscribing,...

Bring it on!!!

PBFAB.COM · 08-20-2009, 01:56 PM

Quote:

Originally Posted by my67chevytruck

Spill the frijoles!!!!!!

I will let the owner spill the beans.... or we can just all enjoy the suspense and see what updates will unveil!

my67chevytruck · 08-20-2009, 02:29 PM

Quote:

Originally Posted by porterbuilt

I will let the owner spill the beans.... or we can just all enjoy the suspense and see what updates will unveil!

Sounds good Nate! We all need a good suspense now and then.

I am picturing a dropmember, porterbuilt back half, and a accuair system.... time will tell... looking forward to updates.

GVizzle · 08-20-2009, 05:19 PM

Quote:

Originally Posted by n2billet

You must be the owner.......Nate told me whats in store for it.....I'm jealous beyond words.....

Its all your fault too. I've been staring at tootsie roll waiting for that thing to get done for the past eight months debating whether or not to cut this one up.

Quote:

Originally Posted by my67chevytruck

Spill the frijoles!!!!!!

Front:

Porterbuilt "FRONT DROPMEMBER", arms, Sway

Nates "New Hoodhinges"

Porterbuilt Crossmembers (two driveshafts)

Rear: Custom Porterbuilt "DROPMEMBER" (Weld IN)

Sheetmetal bed work by Nate. with wood bed.

ACCUAIR Dual Compressor set up with Key FOB remote

BIG Brakes: (leaning toward smooth rotors to maintain OEM style look)

Wheels: Still Debating It will be a 20 front 22 rear (Like to hear imput)

Paint: Will Stay with all moldings and Trim

Motor/Trans: Factory numbers matching 350 with numbers matching tranny.

Should turn out Good. I hope everybody will enjoy seeing Nathan at Porterbuilt work his magic on this one.

n2billet · 08-20-2009, 05:36 PM

Quote:

Originally Posted by GVizzle

Its all your fault too. I've been staring at tootsie roll waiting for that thing to get done for the past eight months debating whether or not to cut this one up.

Front:

Porterbuilt "FRONT DROPMEMBER", arms, Sway

Nates "New Hoodhinges"

Porterbuilt Crossmembers (two driveshafts)

Rear: Custom Porterbuilt "DROPMEMBER" (Weld IN)

Sheetmetal bed work by Nate. with wood bed.

ACCUAIR Dual Compressor set up with Key FOB remote

BIG Brakes: (leaning toward smooth rotors to maintain OEM style look)

Wheels: Still Debating It will be a 20 front 22 rear (Like to hear imput)

Paint: Will Stay with all moldings and Trim

Motor/Trans: Factory numbers matching 350 with numbers matching tranny.

Should turn out Good. I hope everybody will enjoy seeing Nathan at Porterbuilt work his magic on this one.

One day the tootsie will roll......and it will be sporting all the trim just like your truck

Nates "New Hoodhinges" There will be a small line for these when they are done..

I will PM you later with my wheel and tire choices for you...

Me and Nate had this conversation earlier today....spending your money is so much easier than mine!

kieth · 01-28-2011, 06:33 PM

I would stay with 17 or 18, you will not like the ride with the band aid tires.

Quote:

Originally Posted by GVizzle

Its all your fault too. I've been staring at tootsie roll waiting for that thing to get done for the past eight months debating whether or not to cut this one up.

Front:

Porterbuilt "FRONT DROPMEMBER", arms, Sway

Nates "New Hoodhinges"

Porterbuilt Crossmembers (two driveshafts)

Rear: Custom Porterbuilt "DROPMEMBER" (Weld IN)

Sheetmetal bed work by Nate. with wood bed.

ACCUAIR Dual Compressor set up with Key FOB remote

BIG Brakes: (leaning toward smooth rotors to maintain OEM style look)

Wheels: Still Debating It will be a 20 front 22 rear (Like to hear imput)

Paint: Will Stay with all moldings and Trim

Motor/Trans: Factory numbers matching 350 with numbers matching tranny.

Should turn out Good. I hope everybody will enjoy seeing Nathan at Porterbuilt work his magic on this one.

GVizzle · 01-28-2011, 06:35 PM

Quote:

Originally Posted by kieth

I would stay with 17 or 18, you will not like the ride with the band aid tires.

Thanks for the tip!!!!!!!!

08-20-2009, 12:35 AM	#1
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Project "Old Aux" Well, I wonder what could be happening to this one? __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

08-20-2009, 01:10 AM	#2
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,827	Re: Project "Old Aux" ................ __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

08-20-2009, 05:47 AM	#3
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: Project "Old Aux" In the far distance, I can hear faint sound of a sawzall....... __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

08-20-2009, 07:50 AM	#4
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Project "Old Aux" Looks pretty darn good the way it is right now. Also looks pretty expensive. You pick this thing up just the way it sits? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

08-20-2009, 08:06 AM	#5
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project "Old Aux" Uh-oh..... this my friends will get interesting. Nate, what's the current suspension setup? Subscribed! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 08-20-2009 at 08:06 AM.

08-20-2009, 08:09 AM	#9
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Project "Old Aux" Here to watch and learn!! __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

08-20-2009, 08:33 AM	#10
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: Project "Old Aux" Subscribing,... __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-20-2009, 09:51 AM	#11
Mordachai Fat Fendered Fleetside Join Date: Nov 2004 Location: WPB, S. FL, USA, Earth Posts: 718	Re: Project "Old Aux" ^ ditto is it just me, or do the rear tires look awful wide in the first pic?(and for some reason, not so wide in the last pic?) __________________ 71 GMC lwb 56 Big window swb 93 GMC Sonoma (dd) radiused fiberglass fender project for 67-72

08-20-2009, 10:21 AM	#12
GVizzle Registered User Join Date: Oct 2008 Location: San Clemente, CA Posts: 405	Re: Project "Old Aux" Is it the new "porterbuilt Liftmember" you're puttin on that thing?

08-20-2009, 10:32 AM	#14
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: Project "Old Aux" subscribed!! __________________ members met: redbaron69, billsbowtie,nc67

08-20-2009, 10:53 AM	#15
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Project "Old Aux" oh the suspense! __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

08-20-2009, 11:11 AM	#16
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project "Old Aux" I'll be watching this one __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-20-2009, 11:15 AM	#17
Mordachai Fat Fendered Fleetside Join Date: Nov 2004 Location: WPB, S. FL, USA, Earth Posts: 718	Re: Project "Old Aux" nate- I think he was hinting that he'd like to see a 'raised crossmember' lol.

08-20-2009, 01:28 PM	#18
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Project "Old Aux" Spill the frijoles!!!!!! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

08-20-2009, 01:56 PM	#19
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: Project "Old Aux" Subscribing,... Bring it on!!! __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.