68 S/C update..... - Page 29 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jmedero · 12-23-2012, 10:47 PM

Nice.
Posted via Mobile Device

EZ SPEED · 12-24-2012, 08:08 AM

Quote:

Originally Posted by Hart_Rod

**** Thanks!!! ****

Thanks for the info! I'll hit you up with some more questions later.

*** UPDATES!! ***

Picked up a nice steering wheel to match my Billet Specialty wheels (thanks JWALL!!!) Also, the first motor I was looking at didn't work out (long story...

...can some please delete those pictures???), so I've tracked down two other candidates:

1st: L76/6L90E out of an 09 G8 with 16K miles.
2nd: L99/6L90E out of a 11 Chevy truck with only 900 miles!!

Any thoughts to which one might be better for running the TVS1900 Magnacharger???

Love the steering wheel, looks great.

Just remember if you buy one of those, they will most likely have AFM (Active Fuel Management) which turns off cylinders to conserve fuel. It does this by the lifters...so if you decicde to put in a nice rumpity cam...you will have to change out all the lifters, lifter buckets, cam sprocket, upper plate (under intake) and pushrods.
Not sure if either one of those has VVT (variable valve timing), in which you will have to change out a few more pieces like the timing cover and a couple of other small pieces if I remember correctly, to do a the bumping cam also.
Just do a little research before you buy and hollar a me if you have any questions.

**Hart_Rod** · 12-24-2012, 09:53 AM

Quote:

Originally Posted by EZ SPEED

Love the steering wheel, looks great.

Just remember if you buy one of those, they will most likely have AFM (Active Fuel Management) which turns off cylinders to conserve fuel. It does this by the lifters...so if you decicde to put in a nice rumpity cam...you will have to change out all the lifters, lifter buckets, cam sprocket, upper plate (under intake) and pushrods.
Not sure if either one of those has VVT (variable valve timing), in which you will have to change out a few more pieces like the timing cover and a couple of other small pieces if I remember correctly, to do a the bumping cam also.
Just do a little research before you buy and hollar a me if you have any questions.

Is there a bigger factory cam (Corvette??) that will work with VVT or AFM? Should I just leave the motor stock and add the supercharger and take it as is? Is the iron block preferable over the aluminum G8 block? PM me your phone number when you get a chance, I would like to discuss this more.
Posted via Mobile Device

EZ SPEED · 12-24-2012, 10:37 AM

Quote:

Originally Posted by Hart_Rod

Is there a bigger factory cam (Corvette??) that will work with VVT or AFM? Should I just leave the motor stock and add the supercharger and take it as is? Is the iron block preferable over the aluminum G8 block? PM me your phone number when you get a chance, I would like to discuss this more.
Posted via Mobile Device

The LS9 cam is a great factory cam. works well with superchargers and turbos. no lope. But it doesnt work with VVT or AFM.

I would probably do the G8 engine if it was me. Some guys really love the iron block, but its not really necessary. look at my SS..aluminum 6.2 block bored and stroked to 427 cubes and mine makes 896 flywheel horsepower

You can always run the stock G8 with the supercharger for now....then later on swap out the cam and respective parts.

**Hart_Rod** · 01-07-2013, 12:09 AM

I hit the road at 3AM this morning and got back around 6PM, nearly 800 miles and very long day but I now have the new powerplant for the Farm truck. Feast your eyes!!!
.
.
.
.
.
.
2013 Camaro SS 6.2/6L80E with ....1....3.....5...miles!!!!

Zoomin · 01-07-2013, 12:17 AM

Dude, that's averaging 53 mph after stops for fuel, lunch and load.

Can't blame ya for getting there before missing out.
Posted via Telegraph

gringoloco · 01-07-2013, 12:24 AM

That's what I'm talkin' 'bout! It's getting the blower from Steiny?
Posted via Mobile Device

emilio impala · 01-07-2013, 07:51 AM

Es hermoso ese motor!

EZ SPEED · 01-07-2013, 07:53 AM

Awesome!! congrats!!

**FRENCHBLUE72** · 01-07-2013, 08:13 AM

Dang bet the oil. Never even got checked before she was pulled
Posted via Mobile Device

Xeen · 01-07-2013, 08:20 AM

Quote:

Originally Posted by Hart_Rod

I hit the road at 3AM this morning and got back around 6PM, nearly 800 miles and very long day but I now have the new powerplant for the Farm truck. Feast your eyes!!!

2013 Camaro SS 6.2/6L80E with ....1....3.....5...miles!!!!

Wow what a great score, you are a lucky man, did you get the computer and wiring harness with it?
Also is that one where the computer requires the cluster/information display center to work correctly?
I guess I'm just wondering whats it takes to put one of these in a c10 and work correctly.

STOCKISH · 01-07-2013, 09:30 AM

So so so jealous! LOL. Great score buddy!

Rusbuilt · 01-07-2013, 09:42 AM

That...is...AWESOME!!

sourkraut · 01-07-2013, 09:48 AM

Awesome

**Hart_Rod** · 01-07-2013, 10:38 AM

Quote:

Originally Posted by Zoomin

Dude, that's averaging 53 mph after stops for fuel, lunch and load.

Can't blame ya for getting there before missing out.
Posted via Telegraph

, there was a 3 hour break in the middle.

Quote:

Originally Posted by gringoloco

That's what I'm talkin' 'bout! It's getting the blower from Steiny?
Posted via Mobile Device

Yes sir! It's sitting in the back of my truck,

.

Quote:

Originally Posted by emilio impala

Es hermoso ese motor!

Thanks!

Quote:

Originally Posted by EZ SPEED

Awesome!! congrats!!

Thanks!

Quote:

Originally Posted by FRENCHBLUE72

Dang bet the oil. Never even got checked before she was pulled
Posted via Mobile Device

Thanks!

Quote:

Originally Posted by Xeen

Wow what a great score, you are a lucky man, did you get the computer and wiring harness with it?
Also is that one where the computer requires the cluster/information display center to work correctly?
I guess I'm just wondering whats it takes to put one of these in a c10 and work correctly.

I got the complete engine/tranny, all accessories, computer, electric pedal and wiring harnes. I'm not sure about the cluster. I talked to John at Speartech and he's going to build me a custom harness for it.

Quote:

Originally Posted by 1972SuperCheyenne

So so so jealous! LOL. Great score buddy!

Thanks!

Quote:

Originally Posted by Rusbuilt

That...is...AWESOME!!

Thanks!

Quote:

Originally Posted by sourkraut

Awesome

Thanks!

72BlckButy · 01-07-2013, 02:09 PM

Holy cow, nice buy Rob!

That must have been once heck of a test drive for that '13 Camaro.

Number98 · 01-08-2013, 12:12 AM

I hate you....

Hybridcx · 01-08-2013, 12:36 AM

I might have missed it and I am going back a few pages here but did you ever "tune" your fuel filler in the marker light? Id be interested to see how that turned out. Love your truck

Hybridcx · 01-08-2013, 12:43 AM

Never mind I just stumbled across this...
http://67-72chevytrucks.com/vboard/s...d.php?t=380571
My bad.

jrdv · 01-08-2013, 02:13 AM

Very nice!!!

I think you made the right choice!

Be sure to post every little detail so I can copy what you do ( minus the SC of course )!

John

killer71 · 01-08-2013, 09:46 AM

Wish I could afford something like this!

Posted via Mobile Device
Posted via Mobile Device

C10_ustacould · 01-08-2013, 09:57 AM

Quote:

Originally Posted by Hart_Rod

Yes sir! It's sitting in the back of my truck,

.

I think the supercharger is supposed to be in the front...

**Hart_Rod** · 01-08-2013, 10:10 AM

Quote:

Originally Posted by 72BlckButy

Holy cow, nice buy Rob!

That must have been once heck of a test drive for that '13 Camaro.

, it was a blast!!

Quote:

Originally Posted by Number98

I hate you....

, PM sent.

Quote:

Originally Posted by Hybridcx

I might have missed it and I am going back a few pages here but did you ever "tune" your fuel filler in the marker light? Id be interested to see how that turned out. Love your truck

Never mind I just stumbled across this...
http://67-72chevytrucks.com/vboard/s...d.php?t=380571
My bad.

Thanks and glad you found it!

Quote:

Originally Posted by killer71

Wish I could afford something like this!

Posted via Mobile Device
Posted via Mobile Device

, it was your thread that got me looking for this.....

Quote:

Originally Posted by BucksSS

I think the supercharger is supposed to be in the front...

No wonder I could only get 400HP out of it.....

.

Quote:

Originally Posted by jrdv

Very nice!!!

I think you made the right choice!

Be sure to post every little detail so I can copy what you do ( minus the SC of course )!

John

I think we need to work together on this. Here's my parts list so far:

Dirty Dingo adjustable engine mounts, CPP engine stands, CPP tubular tranny crossmember, auto high hump, Speartech harness, factory accessories, Doug Thorley big tube headers (hopefully)....

I think you will have to switch your oil pant to either an Fbody (won't work with the ECE mounts) or the Cadillac CTsV. Add as necessary.

**67cheby** · 01-08-2013, 11:33 AM

WOW...sweet POWER PLANT !

Zoomin · 01-08-2013, 12:03 PM

Quote:

Originally Posted by 67cheby

WOW...sweet POWER PLANT !

It sure is!

Square Peg sure would look cool with this for sure. Heck, anything would.

12-23-2012, 10:47 PM	#701
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 68 S/C update..... Nice. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-07-2013, 12:09 AM	#705
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Re: 68 S/C update..... I hit the road at 3AM this morning and got back around 6PM, nearly 800 miles and very long day but I now have the new powerplant for the Farm truck. Feast your eyes!!! . . . . . . 2013 Camaro SS 6.2/6L80E with ....1....3.....5...miles!!!! Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

01-07-2013, 12:17 AM	#706
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: 68 S/C update..... Dude, that's averaging 53 mph after stops for fuel, lunch and load. Can't blame ya for getting there before missing out. Posted via Telegraph __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

01-07-2013, 12:24 AM	#707
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: 68 S/C update..... That's what I'm talkin' 'bout! It's getting the blower from Steiny? Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-07-2013, 07:51 AM	#708
emilio impala Registered User Join Date: Jun 2012 Location: Argentina Posts: 78	Re: 68 S/C update..... Es hermoso ese motor!

01-07-2013, 07:53 AM	#709
EZ SPEED Registered User Join Date: May 2009 Location: Anniston, Alabama Posts: 164	Re: 68 S/C update..... Awesome!! congrats!! __________________ Eric 1967 C10 Small Window - LWB http://67-72chevytrucks.com/vboard/s...d.php?t=657509 2004 Silverado 2500HD - Turbo Diesel 603 rwhp / 1090 rwtq 2016 Camaro SS - Satin Pearl Nero wrap My 2010 Camaro SS Magazine feature (SOLD) http://www.superchevy.com/features/g...of-perfection/

01-07-2013, 08:13 AM	#710
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: 68 S/C update..... Dang bet the oil. Never even got checked before she was pulled Posted via Mobile Device __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-07-2013, 09:30 AM	#712
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 68 S/C update..... So so so jealous! LOL. Great score buddy! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-07-2013, 09:42 AM	#713
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: 68 S/C update..... That...is...AWESOME!! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

01-07-2013, 09:48 AM	#714
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: 68 S/C update..... Awesome __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

01-07-2013, 02:09 PM	#716
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 68 S/C update..... Holy cow, nice buy Rob! That must have been once heck of a test drive for that '13 Camaro. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

01-08-2013, 12:12 AM	#717
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,553	Re: 68 S/C update..... I hate you....

01-08-2013, 12:36 AM	#718
Hybridcx Registered User Join Date: May 2012 Location: Abbotsford B.C Posts: 26	Re: 68 S/C update..... I might have missed it and I am going back a few pages here but did you ever "tune" your fuel filler in the marker light? Id be interested to see how that turned out. Love your truck

01-08-2013, 12:43 AM	#719
Hybridcx Registered User Join Date: May 2012 Location: Abbotsford B.C Posts: 26	Re: 68 S/C update..... Never mind I just stumbled across this... http://67-72chevytrucks.com/vboard/s...d.php?t=380571 My bad.

01-08-2013, 02:13 AM	#720
jrdv Registered User Join Date: Apr 2000 Location: new mexico Posts: 948	Re: 68 S/C update..... Very nice!!! I think you made the right choice! Be sure to post every little detail so I can copy what you do ( minus the SC of course )! John __________________ 1972 3/4T 4x4 Chevrolet (383) 1971 c-10 SWB (400 sb) 1972 4x4 Blazer 1969 SWB 4x4 GMC Projects: 1972 stepside 4x4 http://67-72chevytrucks.com/vboard/s...d.php?t=280132 http://67-72chevytrucks.com/vboard/s...d.php?t=285952 http://67-72chevytrucks.com/vboard/s...d.php?t=553672 http://67-72chevytrucks.com/vboard/s...d.php?t=522704



Register or Log In To remove these advertisements.

01-08-2013, 09:46 AM	#721
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: 68 S/C update..... Wish I could afford something like this! Posted via Mobile Device Posted via Mobile Device __________________ R.I.P. Killer 71 10/26/07

01-08-2013, 11:33 AM	#724
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 68 S/C update..... WOW...sweet POWER PLANT ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

Register or Log In To remove these advertisements.