68 S/C update..... - Page 18 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chevy1series · 07-12-2010, 07:10 PM

Quote:

Originally Posted by 67cheby

i did the underneath of my cab with sprayin bedliner, do you think i will need to do this to my floor also or do you think the bedliner will kill all of my noise and heat ??

well what i would do is exactly what big al and hart rod did on top and that +the bedliner on the bottom= a real nice interior dont bed line were you put your feet

**Hart_Rod** · 07-12-2010, 07:34 PM

Quote:

Originally Posted by big_al_71

wow I did my insulation the same exact way couple years ago huge difference!!!!

To funny,

....

Quote:

Originally Posted by 67cheby

i did the underneath of my cab with sprayin bedliner, do you think i will need to do this to my floor also or do you think the bedliner will kill all of my noise and heat ??

Quote:

Originally Posted by 68 short step

looks great rob

Thanks!

Quote:

Originally Posted by 67chevy1series

well what i would do is exactly what big al and hart rod did on top and that +the bedliner on the bottom= a real nice interior dont bed line were you put your feet

+1, The bedliner will cut down on some of the noise, but it will probably not do to much for the heat. For the price, you can't beat the added protection of the insulation, JMHO.

68 Quad C10 · 07-12-2010, 07:43 PM

Quote:

Originally Posted by 67cheby

i did the underneath of my cab with sprayin bedliner, do you think i will need to do this to my floor also or do you think the bedliner will kill all of my noise and heat ??

bedliner will do great as far as road noise and heat also from rock damage on the uderside of fenders etc... works great we had a 1934 Ford Sedan we did the lining on all the underside of fenders and it saved them from rock stars and even a tire weight that came off at 80mph on the freeway if the lining wasn't there it would have went throght the fender instead it pushed a reversed dent to the top of the fender and with a hammer wrapped with a rag and a dolly tapped it back in and was back to looking good so i highly suggest it.... as for the inside i would still do the fatmat or dynamat because it makes it real nice inside with the windows up no noise and helps with audio just my 2 cents

msgross · 07-12-2010, 08:16 PM

lots of guys stick piece of that fatmat or dynamat on the inside of the outer door skin plus a little on the larger back wall panels too...

Jim_D · 07-13-2010, 10:28 AM

You ever get tired of those wheels and want to sell them let me know....

gcburdic · 07-13-2010, 04:35 PM

Hey Rob....forgot to ask....how much Fat Mat did you use??....Going to order some and need an estimate

**Hart_Rod** · 07-13-2010, 06:14 PM

Quote:

Originally Posted by msgross

lots of guys stick piece of that fatmat or dynamat on the inside of the outer door skin plus a little on the larger back wall panels too...

+1

Quote:

Originally Posted by Jim_D

You ever get tired of those wheels and want to sell them let me know....

Will do,

.

Quote:

Originally Posted by gcburdic

Hey Rob....forgot to ask....how much Fat Mat did you use??....Going to order some and need an estimate

I bought their $129 kit (2 rolls) off of their website and have 3/4ths of a roll left.

R/

67chevy1series · 07-24-2010, 06:12 AM

hey rob how does the buddy bucket adjuster arm come off are they screwed in or rivited and who repdoses them besides the guy in the classified section thanks in advance

**Hart_Rod** · 07-24-2010, 10:24 AM

Quote:

Originally Posted by 67chevy1series

hey rob how does the buddy bucket adjuster arm come off are they screwed in or rivited and who repdoses them besides the guy in the classified section thanks in advance

It's rivited on. He's the only one that I know that makes them.

**Hart_Rod** · 08-07-2010, 03:38 PM

Farm truck......

**Palf70Step** · 08-07-2010, 06:26 PM

Yeah

bigguy69 · 08-07-2010, 07:46 PM

i love that truck!!!

**Hart_Rod** · 08-08-2010, 08:46 AM

Quote:

Originally Posted by Palf70Step

Yeah

, Cmon Bill, don't tell me you wouldn't haul some hay in the back of this truck or take it on a trash run to the dump....

.

Quote:

Originally Posted by bigguy69

i love that truck!!!

Thanks! It's a blast to drive.

68 short step · 08-08-2010, 06:42 PM

sourkraut · 08-20-2010, 10:43 PM

how far up the firewall did you run your fatmat?

**Hart_Rod** · 08-20-2010, 11:09 PM

Quote:

Originally Posted by 68 short step

Thanks!

Quote:

Originally Posted by sourkraut

how far up the firewall did you run your fatmat?

To about where the toe board meets the firewall. The original firewall mat/insulation were still in primo shape so I didn't mess with it. My burb has been gutted, so I'll go all the way up on it.

R/

sourkraut · 08-20-2010, 11:11 PM

that is what i was thinking with mine since it is bare as the burb. will you just cut around everything or leave an opening with the brake cluster and circuit breaker box.

**Tom Vogel** · 08-21-2010, 10:22 AM

Rob...
It appears you used braided flex for your entire fuel line setup. Why not aluminum, say from the pump to the firewall?

**Hart_Rod** · 09-08-2010, 09:14 AM

Quote:

Originally Posted by sourkraut

that is what i was thinking with mine since it is bare as the burb. will you just cut around everything or leave an opening with the brake cluster and circuit breaker box.

Thats affirmative.

Quote:

Originally Posted by Tom Vogel

Rob...
It appears you used braided flex for your entire fuel line setup. Why not aluminum, say from the pump to the firewall?

The braided lines made it easier connecting all the components. Plus I already had about 15' of the line,

.

Sorry late posting answers, I kinda lost this thread.....

**Hart_Rod** · 09-09-2010, 07:26 AM

Starting the last phase......

**lolife99** · 09-09-2010, 07:30 AM

Quote:

Originally Posted by Hart_Rod

Starting the last phase......

You going to throw a couple bags under there while you are at it?

72BlckButy · 09-09-2010, 07:37 AM

Different rearend?

jmedero · 09-09-2010, 08:38 AM

Your mounting the tires in the bed? That's awesome!!! I've never seem that before. Can't wait to see it done. Your a pioneer!
Lol
Posted via Mobile Device

ksbrktracer · 09-09-2010, 08:46 AM

Thats what happens when you are a leader.........All of the great , innovative Ideas belong too you..... You go Rob

**Palf70Step** · 09-09-2010, 05:54 PM

So is this little truck coming over to our Cruise in Oct?

07-12-2010, 08:16 PM	#429
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 S/C update..... lots of guys stick piece of that fatmat or dynamat on the inside of the outer door skin plus a little on the larger back wall panels too... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 07-12-2010 at 08:17 PM.

07-13-2010, 10:28 AM	#430
Jim_D Registered User Join Date: Jun 2010 Location: East TN Posts: 58	Re: 68 S/C update..... You ever get tired of those wheels and want to sell them let me know....

07-13-2010, 04:35 PM	#431
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 68 S/C update..... Hey Rob....forgot to ask....how much Fat Mat did you use??....Going to order some and need an estimate __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

07-24-2010, 06:12 AM	#433
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 68 S/C update..... hey rob how does the buddy bucket adjuster arm come off are they screwed in or rivited and who repdoses them besides the guy in the classified section thanks in advance

08-07-2010, 03:38 PM	#435
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,827	Re: 68 S/C update..... Farm truck...... Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

08-07-2010, 06:26 PM	#436
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,643	Re: 68 S/C update..... Yeah __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

08-07-2010, 07:46 PM	#437
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: 68 S/C update..... i love that truck!!! __________________ members met: redbaron69, billsbowtie,nc67

08-08-2010, 06:42 PM	#439
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: 68 S/C update.....

08-20-2010, 10:43 PM	#440
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: 68 S/C update..... how far up the firewall did you run your fatmat? __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

08-20-2010, 11:11 PM	#442
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: 68 S/C update..... that is what i was thinking with mine since it is bare as the burb. will you just cut around everything or leave an opening with the brake cluster and circuit breaker box. __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

08-21-2010, 10:22 AM	#443
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,563	Re: 68 S/C update..... Rob... It appears you used braided flex for your entire fuel line setup. Why not aluminum, say from the pump to the firewall?

09-09-2010, 07:26 AM	#445
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,827	Re: 68 S/C update..... Starting the last phase...... Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

09-09-2010, 07:37 AM	#447
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 68 S/C update..... Different rearend? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

09-09-2010, 08:38 AM	#448
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 68 S/C update..... Your mounting the tires in the bed? That's awesome!!! I've never seem that before. Can't wait to see it done. Your a pioneer! Lol Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

09-09-2010, 08:46 AM	#449
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: 68 S/C update..... Thats what happens when you are a leader.........All of the great , innovative Ideas belong too you..... You go Rob



Register or Log In To remove these advertisements.

09-09-2010, 05:54 PM	#450
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,643	Re: 68 S/C update..... So is this little truck coming over to our Cruise in Oct? __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

Register or Log In To remove these advertisements.